Laurent Lesage <[email protected]> writes: > Hi Martin, Hi, > > Martin Michlmayr a écrit : >> * Laurent Lesage <[email protected]> [2010-11-15 18:04]: >> >>> I'm quite new at using sheeva plug. >>> I installed the debian system using the tar ball of MArtin Michlmayr, on >>> an SD card. >>> When I did an upgrade, I could not reboot : I had a "bad maigic number" >>> on the console, or, if the card was actually loaded, it hangs with a >>> "kernel panic". >>> >> >> Please post the full boot log (u-boot and Linux) as well as the output >> of "printenv" from u-boot. >> >> > > the printenv and boot log is attached. > > Please note this : I thought I had some problem with SD card reader and > tried to use an usb key in place of SD card. I noticed that the system > was far more reactive than with a SD card. And I had no problem reading > the USB key -I had some with SD card and that seemed to cause the "bad > magic number" problem. But finally, when booting after upgrading the > kernel, I had the same problem. That's what you can see on the logs. > ("null pointer") > > There are some error on some sectors in /dev/mtdblock0 : may be a > hardware problem??? > > If I do not make an upgrade, the systems seems to work fine, but I > haven't tested a long time (just a few hours).
hmmm... I guess that you may need to run flash-kernel manually or something like that. Browse the list archive for ipv6 related crashed, I guess you'll find the one similar to yours. The mv_cesa one may be caused by the same thing. Martin, feel free to correct me if you think I'm wrong. Arnaud -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
