I used http://people.debian.org/~joeyh/d-i/armel/images/daily/iop32x/network-console/ss4000e/ (17-Dec-2010 files) and followed http://d-i.alioth.debian.org/manual/en.armel/ch05s01.html#boot-firmware-ss4000e (used minicom instead of cu+sb for ymodem activity) and followed the network installer. Installation at first seemed fine : ... Finishing the installation The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system reboot [ 7456.220000] Restarting system.
EM-7210 ver.T04 2005-12-12 (For ver.AA) == Executing boot script in 1.000 seconds - enter ^C to abort RedBoot> fis load ramdisk.gz RedBoot> fis load zImage RedBoot> exec Using base address 0x01008000 and length 0x00200000 Uncompressing Linux... done, booting the kernel. And nothing more. I assume this kernel is not configured for console=ttyS0,115200 I got no questions if I needed a specific console during the install. Can I inspect / change the kernel command line from RedBoot ? I also selected an sshd to install. But the system does not respond to ssh, and does not ping either. The installer used dhcp for itself, the system did ping and i could even ssh in. Now I can not. Anything else I can try ? -- Hans Lambermont -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
