Hi list, Today I decided to upgrade my TS-219P to squeeze. This went reasonably well. I had a struggle with insserv, rsyslogd and initscripts, but that is not arm related I guess.
An other problem I had was that my device would not boot anymore after removal of linux-image-2.6.32-bpo.5-kirkwood. During the upgrade I got a message from mdadm that UUID of the raid-set changed. After upgrade and reboot I noticed linux-image-2.6.32-bpo.5-kirkwood kernel was load instead of linux-image-2.6.32-5-kirkwood. So I removed the BPO kernel and rebooted once more. That's when I needed to make a console cable. I found that the wrong UUID was in the initrd and after some tweaking I got everything back to work. Does anyone on this list know why the UUID would change? And if this is documented somewhere? BTW: some more details about my setup: * 2 identical hard drives. Both with 2 partitions. 1 raid and 1 swap. * both raid partitions form a raid1 -- GRTNX, RobJE -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
