Hi! Am 04.02.2011 20:32, schrieb Jos van Roosmalen: > What are the factory settings for > eSata for arcNumber and mainlineUnix (yeah stupid, I didn't make a > printenv before starting)?
I think I have the same Sheevaplug as you do (it's this one: <http://newit.co.uk/shop/proddetail.php?prod=eSataSheevaPlug>). Up to now, I have pretty much left it at its default settings, so this might help you: >>>>>> Marvell>> printenv baudrate=115200 loads_echo=0 ipaddr=10.4.50.165 serverip=10.4.50.5 rootpath=/mnt/ARM_FS/ netmask=255.255.255.0 console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x1ff00000@0x1 00000(root) CASset=min MALLOC_len=1 ethprime=egiga0 bootargs_root=root=/dev/nfs rw bootargs_end=:::DB88FXX81:eth0:none image_name=uImage standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/m tdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x20 00000; ethmtu=1500 mvPhoneConfig=mv_phone_config=dev0:fxs,dev1:fxs mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500 usb0Mode=host yuk_ethaddr=00:00:00:EE:51:81 nandEcc=1bit netretry=no rcvrip=169.254.100.100 loadaddr=0x02000000 autoload=no ethact=egiga0 eth=10.4.50.4 ethaddr=F0:AD:4E:00:41:0C run_diag=no bootargs=console=ttyS0,115200 mtdparts=nand_mtd:0x400000@0x100000(uImage),0x1fb0 0000@0x500000(rootfs) rw root=/dev/mtdblock1 rw ip=10.4.50.4:10.4.50.5:10.4.50.5 :255.255.255.0:DB88FXX81:eth0:none bootcmd=nand read.e 0x800000 0x100000 0x400000; bootm 0x800000 stdin=serial stdout=serial stderr=serial mainlineLinux=no enaMonExt=no enaCpuStream=no enaWrAllo=no pexMode=RC disL2Cache=no setL2CacheWT=yes disL2Prefetch=yes enaICPref=yes enaDCPref=yes sata_dma_mode=yes netbsd_en=no vxworks_en=no bootdelay=3 disaMvPnp=no enaAutoRecovery=yes Environment size: 1344/131068 bytes <<<<<< I would be very interested in your progress with installing Debian onto it, since I am planning to do likewise (once I have a bit of free time to work on it). I am particularly curious as to whether an update to uBoot is actually necessary. HTH, Sven -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
