Hi, On Sat, Nov 05, 2011 at 05:53:03PM +0100, DrEagle wrote: > I have two Thecus N2100 Bricked and make a call for some help ! > > I have soldered a RS232 on the SATA Board, as explained here and [1] on > my wiki [2]. > > With the serial console I have one of the Thecus that only show a + at Boot.
IIRC I saw that when I had a bad ram DIMM installed. So it could be that some of your hardware components has got loose/dusty. > The other one hang at booting debian kernel : > > RedBoot> exec -c "console=ttyS0,115200 root=/dev/ram0 initrd=0xa0800000,42M" > Build ATAG > ATAG_MEM: Overwrite ram_end with real_region_top=0x20000000, memsize=512 M > ATAG_MEM=536870912@0xa0000000, MACH_TYPE=1101 > Using base address 0x00200000 and length 0x00160000 > > Is there any method to get the kernel and initrd from TFTP and reflash > them into RedBoot ? See the commands listed here: http://www.cyrius.com/debian/iop/n2100/telnet.html > Where can I get the kernel and initrd ? Debian-installer kernel and ramdisk should be good: http://ftp.uk.debian.org/debian/dists/stable/main/installer-armel/current/images/iop32x/network-console/ > Is there any rescue method for Debian without bricking ? > > Amicalement, > -- > Gk2 [:-] > > [1] david.thg.se/n2100/addserial.html > [2] doukki.net/doku.php?id=wiki:notes:n2100 > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
