On Thu, 2011-12-08 at 10:07 +0000, Martin Michlmayr wrote: > > Then I tried the instructions at: > > > > http://www.cyrius.com/debian/nslu2/unpack.html > > > > but the slug seems to be stuck after the ramdisk is loaded (ethernet led > > remains green and alone for ever). Even after 8 hours ! > > > > Do you have any clues ? > > Hard to say... with the manual method it's very easy to get something > wrong that will cause the device not to boot. I suggest you do > another installation and make sure to follow the instructions > precisely. > > Some common problems: > > - Do you use the standard disk layout described on the page? If not, > did you update /etc/fstab? > > - Do you use 2 disks? If so, try with one. > > - You could try the tips at > http://cyrius.com/debian/nslu2/troubleshooting.html#no-boot >
Hi Martin, I had had some issues a long time ago with a similar disk that needed ohci-hcd to be detected. I've just unpacked your sda2-2.6.32-5 image and I see there's only ehci-hcd... I'll modify, repack and try again. Thanks for your quick answer anyway. -- -Groug- "Etre français est-ce que c'est devoir parler français, chanter la Marseillaise, lire la lettre de Guy Môquet ? Ça c'est être con !" -- Eric Cantona -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
