W dniu 17.09.2012 10:05, Pascal Brugier pisze: > I'm wondering if it's a good idea to build a workstation based on ARM > motherboard.
> So I'm asking if ARM plateform is a good choice at this time for a > workstation ? Low needs one may be fine with any dual core 1GB ram board. But SATA or USB hard drive recommended for rootfs. > As it's better, to have a SATA port for read/write performances, there > is not a big choice on mother board and I found only one, it's the last > from Freescale base on i-MX6, and 1Gb network interface is a good point > too. But I did'nt find if I can install Debian armhf (squeeze or wheezy) > on it, so have you some informations about this point? You can run armhf on any ARMv7a cpu as long as you have kernel source for it. http://boundarydevices.com/products/ lists two mx6quad boards. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
