I wonder if you could expand on how you built the 3.4 kernel? I've not succeeded to define a kernel config that will create a bootable kernel and launch the debian installer as the does the kernel at http://d-i.debian.org/daily-images/armel/daily/iop32x/netboot/ss4000e/.
-cjw- -----Original Message----- From: Arnaud Patard (Rtp) [mailto:[email protected]] Sent: Tuesday, July 17, 2012 3:44 PM To: Chris Wilkinson Cc: [email protected] Subject: Re: SS4000E Fan speed, LEDS and power button "Chris Wilkinson" <[email protected]> writes: Please note that I'm about to talk about em7210 so things may be different on em7220. > Has anyone succeeded to control the fan speed according to > temperature, the fan is handled by a w83792*. > control the front panel LEDS and power off with the power button on > this device? The leds are handled by the f75111 chip from fintek. There's a driver here http://git.rtp-net.org/?p=ss4000e.git;a=tree The needed patches are : f75111.patch add_f75111_pdata.patch em7210_add_missing_leds.patch I'm using them on top of 3.4 for several weeks now. For the buttons, there's em7210_add_gpio_keys.patch. It was relying on custom gpio input driver but there's nowadays needed stuff in mainline. > > I built http://lm-sensors.org/ but it couldn't recognize any sensors. > > I also haven't been able to figure out how to set up 4 disks in a > RAID5. The d-I only prompted to install 1 disk. I can format/mount the > other 3 and but don't know how to create the 4-disk RAID. RAID5 needs only 3 drives, so create the RAID5 on 3 drives and then add the last one as spare. Arnaud -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected] -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/000001cdd106$9e1bbf80$da533e80$@net
