On Sun, 2013-09-01 at 11:51 +0100, Tixy wrote: > On Sun, 2013-09-01 at 10:34 +0100, Ian Campbell wrote: > > On Sun, 2013-09-01 at 10:23 +0100, Tixy wrote: > > > On Sat, 2013-08-31 at 20:51 +0200, Paul Kocialkowski wrote: > > > > Le samedi 31 août 2013 à 19:24 +0100, Tixy a écrit : > > > > > I did notice when I first got the Dreamplug that the supplied U-Boot > > > > > was > > > > > very slow, especially enumerating the USB devices. With the Debian > > > > > U-Boot that takes about 3 or 4 seconds, then a second to load the > > > > > kernel > > > > > and initrd. > > > > > > > > I'm using the Debian u-boot too. Can you provide me with the exact > > > > version you have installed? Also, it would be nice if you could post > > > > your bootcmd as well. > > > > > > > > > > I got it from [1] and when it boots it says "U-Boot 2013.01.01 (May 10 > > > 2013 - 06:32:54)". > > > > > > [1] > > > http://ftp.debian.org/debian/pool/main/u/u-boot/u-boot_2013.01.01-4_armel.deb > > > > That's the version currently in sid. > > > > > > > I hacked flash-kernel so it doesn't assume that > > > the kernel lives on the internal card. > > > > > > For entry under "Machine: Globalscale Technologies Dreamplug" > > > > FYI the version of flash-kernel in sid (3.10) allows you to override db > > entries by placing them in /etc/flash-kernel/db. > > That's useful to know. I tried it and it didn't work but then realised > I'm running Wheezy and you said the version in sid supported that :-)
Right ;-) It was only uploaded last week... Ian. -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
