Hello, Not sure if this is the right place to ask, but I am looking for some help in booting the linux-image-armmp kernel on the Beaglebone Black. I am building an SD card image using the freedom-maker tool [0], which is a wrapper around vmdebootstrap. The image has a FAT boot partition and ext4 root partition.
I run a script inside vmdebootstrap's chroot to set up the boot partition. It copies over the MLO and u-boot.img (from debian u-boot package), creates uEnv.txt, and sets up zImage and dtbs. The 1st version of this script [1] uses the kernel deb package and dtbs from rcn-ee.net. I can copy the image to an SD card and boot it on the BBB. The 2nd version of this script [2] uses the kernel and dtbs from debian's linux-image-armmp package. But I can't get farther than "Starting kernel ..." (log is at [3]). Any suggestions on how I can get the armmp kernel to boot on BBB? [0] https://github.com/NickDaly/freedom-maker [1] https://github.com/jvalleroy/freedombox-setup/blob/beaglebone/setup.d/10_dreamplug#L78 [2] https://github.com/jvalleroy/freedombox-setup/blob/beaglebone-testing/setup.d/10_dreamplug#L78 [3] https://gist.github.com/jvalleroy/11162077 Regards, James Valleroy -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/cag3_j1rkvh9hrunao7lsp00jkp_x1zt_brvzvqknct6yanr...@mail.gmail.com
