On Tue, Jun 17, 2014 at 9:49 AM, Ian Campbell <[email protected]> wrote: > Hello, > > TL;DR: Please run the attached kirkwood-qnap script on your ARM based > QNAP systems as "./kirkwood-qnap --info" and report the results in this > thread along with the model/kind of your QNAP device (as precisely as > you can). The script does not need to be run as root and gathers > information about the hardware platform and kernel version only, it is > non-destructive (even if run without the --info, so don't worry).
Just did a forklift upgrade of my old TS-219 to a brand new TS-221. Looking through the mails the TS-221 is not in the thread. ------ machine QNAP TS-221 ------ Kernel: Linux qnap.eppo.yi.org 3.14-0.bpo.1-kirkwood #1 Debian 3.14.7-1~bpo70+1 (2014-06-21) armv5tel GNU/Linux cpuinfo: Hardware : QNAP TS-119/TS-219 dt model: n/a PCI devices: 00:00.0 0600: 11ab:6282 (rev 01) 00:01.0 0106: 197b:2363 (rev 03) 00:01.1 0101: 197b:2363 (rev 03) 01:00.0 0600: 11ab:6282 (rev 01) 01:01.0 0c03: 1b6f:7023 (rev 01) PHY devices (/sys/bus/mdio_bus/devices/): orion-mdio-mii:00 Soc Bus: n/a kirkwood-qnap: machine: QNAP TS-119/TS-219 kirkwood-qnap: success: PCI => kirkwood-ts219-6282.dtb kirkwood-qnap: success: PHY => kirkwood-ts219-6282.dtb -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/CA+HYJN-=PsYk0O=uVQx4iFFXeWFLm3YXVnr=7zfgqjgwlz7...@mail.gmail.com
