On Thu, 26 Mar 2015 13:30:01 +0100, Rick Thomas <[email protected]> wrote: >Ive heard (but cant remember where, sadly) that this is *not* a sign of the >mmcblk device wearing out. Its actually (according to my, possibly faulty, >recollection) indicative of a difference in understanding between uboot and >Linux as to what the partition table should look like for an mmcblk device. >Whatever is doing the read is referring to an address beyond the end of the >logical device because it thinks the logical device is bigger than it actually >is. > >In any case, Ive been getting it on reboots for years and not had any >difficulty. It only shows up on booting, not during actual run-time.
Thanks for the tip. But I'm also getting errors when trying to upgrade the kernel after running "apt-get update": ================ # apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y Setting up linux-image-3.2.0-4-kirkwood (3.2.65-1+deb7u2) ... Running depmod. Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-4-kirkwood /boot/vmlinuz-3.2.0-4-kirkwood update-initramfs: Generating /boot/initrd.img-3.2.0-4-kirkwood cp: reading `/sbin/udevd': Input/output error cp: failed to extend `/var/tmp/mkinitramfs_5dxt8L//sbin/udevd': Input/output error E: /usr/share/initramfs-tools/hooks/udev failed with return 1. update-initramfs: failed for /boot/initrd.img-3.2.0-4-kirkwood with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-4-kirkwood.postinst line 696. dpkg: error processing linux-image-3.2.0-4-kirkwood (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: linux-image-3.2.0-4-kirkwood E: Sub-process /usr/bin/dpkg returned an error code (1) ================ Should I reboot, try again, reboot, and expect Debian to load the latest and greatest kernel? -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/[email protected]
