Hi everybody, I'm trying to install Jessy on a QNAP TS-420U using GPT and RAID1:
RAID1 device #0 - 20.0 GB Software RAID device > #1 20.0 GB f ext4 / SCSI1 (0.0.0) (sda) - 4.0 TB ATA WDC WD40EFRX-68W > 1.0 MB FREE SPACE > #1 1.0 MB f biosgrub > #2 20.0 GB K raid > #3 500.0 MB F swap > 4.0 TB FREE SPACE SCSI2 (0.0.0) (sdb) - 4.0 TB ATA WDC WD40EFRX-68W > 1.0 MB FREE SPACE > #1 1.0 MB f biosgrub > #2 20.0 GB K raid > #3 500.0 MB F swap > 4.0 TB FREE SPACEMy first problem was that the installation was hanging during 'Configuring flash memory to boot the system'.
However, I was able to restart the installer and ... I decided to first try the same installation without RAID1. The good news is that the installer was running through without any problems - the bad news is that after restart I am not able to login anymore:
> ping xxx.xxx.69.241 PING xxx.xxx.69.241 (xxx.xxx.69.241) 56(84) bytes of data. 64 bytes from xxx.xxx.69.241: icmp_req=1 ttl=64 time=0.135 ms > ssh [email protected] [email protected]'s password: Permission denied, please try again.I was trying to reset the QNAP to get back the default QNAP factory settings but that didn't help.
Any suggestions how to start from scratch? Many Thanks in advance, Peter
smime.p7s
Description: S/MIME Cryptographic Signature
