Hello Martin Before the DTB enabled kernel, the cat /proc/cpuinfo shows
Machine: Marvell RD-88F6281 Reference Board On the box I have (it must be 5 years old) You can see the original boot commands in the environment I attached, it effectively boots from flash but the root file system is on the hard drive (in Raid mode) May be I missed a line when I copied and paste - effectively, you need the dtb append ... Regards Francois On Wed, Feb 24, 2016 at 9:49 PM Martin Michlmayr <[email protected]> wrote: > * Francois Lorrain <[email protected]> [2016-02-23 15:23]: > > Machine: Marvell RD-88F6281 Reference Board > > This would have to be "Iomega StorCenter ix2-200", which is the name > in the DTB. > > > Boot-Kernel-Path: /boot/uImage > > Boot-Initrd-Path: /boot/uInitrd > > It would be interesting to see the original bootcmd because I suspect > the device boots from flash. > > > I am not sure about the 3.17rc1 for the DTB-Append-From, but the 3.16 > > kernel is not DTB enabled and the 4.3 is. > > It has always been DTB so you wouldn't need such a line, but you would > need > > DTB-Append: yes > > -- > Martin Michlmayr > http://www.cyrius.com/ >
