Hi Martin,
Thanks for your help. I followed the given procedure and I can power off
the Qnap now.
qnap:/home/jfc# echo 0-0030 > /sys/bus/i2c/devices/0-0030/driver/unbind
qnap:/home/jfc# i2cget 0 0x30 1
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will read from device file /dev/i2c-0, chip address 0x30, data address
0x01, using read byte data.
Continue? [Y/n] y
Error: Read failed
Le 22/04/2016 18:44, Martin Michlmayr a écrit :
> * jfc <[email protected]> [2016-04-20 20:21]:
>> I get the same issue since I upgraded my Qnap TS-119P II | Turbo to
>> Jessie. I'm not able to shutdown my Qnap anymore, it always reboot
>> whatever command I use (halt, shutdown, systemctl).
> I just found the bug report again (not that it contains more info):
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=794266
>
