Hello Helge, Cc: += linux-i2c
On Sun, Aug 07, 2016 at 08:48:29PM +0200, Helge Wiemann wrote:
> I located the battery and removed it for 60 seconds, then booted up my NAS
> and performed your commands. My syslog and tracelog are attached.
>
> I think this made no difference. The date is still incorrect.
This didn't help, the bus is still stuck:
> [ 2.817881] i2c i2c-0: mv64xxx_i2c_fsm: Ctlr Error -- state: 0x7, status:
> 0x38, addr: 0x30, flags: 0x1
This translates to:
state: MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA
status: MV64XXX_I2C_STATUS_MAST_LOST_ARB
Not sure this is accurate though.
From a quick look the mv64xxx driver doesn't support bus recovery. So
unless someone implements this the best bet is probably:
- do it by hand, maybe from the bootloader
- do it really by hand, by shortcutting ground and SCL up to 9 times
until SDA goes high again.
Maybe someone from the i2c folks has a better idea.
Best regards
Uwe
signature.asc
Description: PGP signature
