Quick update. After tip from ukleinek in #debian-arm irc I swapped disks between TS-221 and TS-219. Loaded kernel en initrd from usb device to overcome luks wait.
result: kernel + initrd + disk running fine in TS-219 has below errors in TS-221. ukleinek and I also found that both flavors use DTB, i.e. /proc/devicetree exists in both versions. GRTNX, RobJE On 10/23/2016 05:19 PM, R Epping - debian-arm wrote: > Hello All, > > Today I tried again to run linux-image-marvell (4.7.0-0.bpo.1 in this > case) on my QNAP TS-221. I had issues with it in the past but did not > get around to file a bug. > > I have the same version on a TS-219 which is running fine. > > Booting the TS-221 generates two types of error messages. > -->8-- > [ 37.167103] BUG: Bad rss-counter state mm:c0caa1e0 idx:1 val:1 > [ 783.570365] BUG: Bad rss-counter state mm:c09e6220 idx:1 val:1 > [ 800.172223] BUG: Bad rss-counter state mm:ecbc05e0 idx:1 val:1 > [ 829.005336] BUG: Bad rss-counter state mm:c0d4b880 idx:1 val:1 > [ 871.773956] BUG: Bad rss-counter state mm:c09e63c0 idx:1 val:1 > [ 1299.565344] BUG: Bad rss-counter state mm:ecaf8c40 idx:1 val:1 > -->8-- > > and > > -->8-- > [ 71.033784] Unhandled fault: external abort on linefetch (0x014) at > 0xb6c73db0 > [ 71.041037] pgd = ead9c000 > [ 71.043747] [b6c73db0] *pgd=3fd72831 > [ 84.144056] Unhandled fault: external abort on linefetch (0x014) at > 0xb6d44db0 > [ 84.151313] pgd = eaee8000 > [ 84.154023] [b6d44db0] *pgd=3fc89831 > [ 1300.378292] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9e4 > [ 1300.385547] pgd = e113c000 > [ 1300.388257] [000de9e4] *pgd=3fcd9831 > [ 1300.393119] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9e4 > [ 1300.400370] pgd = e113c000 > [ 1300.403081] [000de9e4] *pgd=3fcd9831 > [ 1300.407834] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9c0 > [ 1300.415089] pgd = e113c000 > [ 1300.417800] [000de9c0] *pgd=3fcd9831 > [ 1300.424135] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9e4 > [ 1300.431387] pgd = e113c000 > [ 1300.434098] [000de9e4] *pgd=3fcd9831 > [ 1300.438852] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9e4 > [ 1300.446107] pgd = e113c000 > [ 1300.448818] [000de9e4] *pgd=3fcd9831 > [ 1300.453525] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9c0 > [ 1300.460773] pgd = e113c000 > [ 1300.463484] [000de9c0] *pgd=3fcd9831 > [ 1300.469987] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9e4 > [ 1300.477246] pgd = e113c000 > [ 1300.479957] [000de9e4] *pgd=3fcd9831 > [ 1300.484726] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9e4 > [ 1300.491983] pgd = e113c000 > [ 1300.494693] [000de9e4] *pgd=3fcd9831 > [ 1300.499489] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9c0 > [ 1300.506745] pgd = e113c000 > [ 1300.509456] [000de9c0] *pgd=3fcd9831 > [ 1300.515763] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9e4 > [ 1300.523017] pgd = e113c000 > [ 1300.525728] [000de9e4] *pgd=3fcd9831 > [ 1300.530470] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9e4 > [ 1300.537718] pgd = e113c000 > [ 1300.540429] [000de9e4] *pgd=3fcd9831 > [ 1300.545138] Unhandled fault: external abort on linefetch (0x014) at > 0x000de9c0 > [ 1300.552394] pgd = e113c000 > [ 1300.555105] [000de9c0] *pgd=3fcd9831 > -->8-- > > Running the TS-221 on linux-image-4.3.0-0.bpo.1-kirkwood is very stable. > As said, running the TS-219 on linux-image-4.7.0-0.bpo.1-marvell is also > stable. > > Main differences I see between the TS-221 (unstable with 4.7 marvell) > and TS-219 (stable with 4.7 marvell) are: > * the kernel flavor, > * the SoC and > * unencrypted raid (TS-219) versus encrypted raid (TS-221). > > I am unsure if this is hardware related or setup related and also do not > know how to further analyze this issue. > Also not sure if this should be reported as a bug or not. > > Any help appreciated. > > GRTNX, > RobJE >
