Were you ever able to get past the loading issue? I'm having the same problem.
On Monday, May 7, 2018 at 8:20:02 AM UTC-4, Jorge Gustavo Rocha wrote: > Hi Martin, > > Thanks for the feedback. > It would be great if Simon could test the installation with the most > recent version of the installer. I can't boot the installer. > > Regarding clunc issues, I found out the netcat behavior has changed for > some reason. I've tried with current netcat version, and clunc fails, > because the call to netcat fails. > > So, with recent versions of netcat-openbsd, clunc fails with this error: > > nc -u -p 6666 192.168.1.103 6666 > usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl] > [-m minttl] [-O length] [-P proxy_username] [-p source_port] > [-q seconds] [-s source] [-T keyword] [-V rtable] [-W recvlimit] > [-w timeout] > [-X proxy_protocol] [-x proxy_address[:port]] [destination] > [port] > > The work around is to use the package netcat-traditional and edit clunc > to replace the call to nc with nc.traditional. The call will be: > nc.traditional -u -p 6666 192.168.1.103 6666 > > Both netcat-openbsd and netcat-traditional can coexist. > > Regards, > > Gustavo > > Às 12:09 de 07/05/2018, Martin Michlmayr escreveu: > > * Jorge Gustavo Rocha <[email protected]> [2018-05-06 00:56]: > >> I've followed the available instructions on: > >> https://wiki.debian.org/InstallingDebianOn/Seagate/PersonalCloud > >> > >> 1) The tftp server is running and I'm able to get the files > >> 2) I can access the U-Boot console with clunc and run the commands: > > ... > >> But after the message: > >> Starting kernel ... > >> nothing more happens. I can't connect with ssh. I can't ping to the > > > > So this happens when you try to boot the installer? > > > > I'm not aware of any problems with that but I haven't tested it in a > > while (and don't have hardware right now). Simon, can you test if > > https://wiki.debian.org/InstallingDebianOn/Seagate/PersonalCloud > > works for you on the Personal Cloud? > > > >> How can I check what is going wrong? Is there any log file where to look > >> for errors? > > > > Not at this point, I don't think so. > > > >> Can I run netconsole or something similar to see what is going on? > > > > That's not built into the kernel iirc. > > > > I assume you can still connect to u-boot with clunc, right? > > > > We have received some reports from users that they could no longer > > connect to u-boot with clunc after installing Debian. Simon Guinot > > (the Seagate NAS expert) investigated this issue quite a bit and > > couldn't find the cause. I will add a warning about this to the wiki. > > Your issue is different but I wanted to point this out here. > > > > -- > Geomaster, Lda > Avenida Barros e Soares, 423 > Nogueira > 4715-214 Braga > NIF 510906109 > Tel 253 680 223 > Tm 910 333 888 > Email [email protected] > Site geomaster.pt > GPS 41.53322,-8.41929
