Ryutaroh Matsumoto dijo [Mon, Mar 01, 2021 at 11:57:47AM +0900]:
> Hi John,
>
> > Does anyone have wifi running on an RPi400 with Debian 64 Buster or
> > Bullseye?
>
> I'm using RPi4B 8GB model, which seems similar to RPi400.
> Without "module_blacklist=vc4" in the kernel command line
> (i.e. "cmdline.txt"), WiFi on my RPi4B does not work.
FWIW, I just popped today's daily image for Buster from
raspi.debian.net in my 8GB RPi4, and:
/----buster ↓ ---------------------------------------------------------
| Debian GNU/Linux 10 rpi4-20210226 ttyS1
|
| rpi4-20210226 login: root
| Linux rpi4-20210226 5.9.0-0.bpo.5-arm64 #1 SMP Debian 5.9.15-1~bpo10+1
| (2020-12-31) aarch64
|
| The programs included with the Debian GNU/Linux system are free
| software;
| the exact distribution terms for each program are described in the
| individual files in /usr/share/doc/*/copyright.
|
| Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
| permitted by applicable law.
| root@rpi4-20210226:~# ip l
| 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1000
| link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
| 2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
mode DEFAULT group default qlen 1000
| link/ether dc:a6:32:ae:8d:58 brd ff:ff:ff:ff:ff:ff
| 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode
DEFAULT group default qlen 1000
| link/ether dc:a6:32:ae:8d:59 brd ff:ff:ff:ff:ff:ff
\----------------------------------------------------------------------
For some reason I canot set up to debug right now, the serial console
gets garbled up (wrong baud rate or so?) when booting with Bullseye,
but connecting a HDMI monitor, it also works -- screenshot attached
:-)
Oh -- And I have just realized no image builds have happened in the
last week (since I did some movements to my build server). I'll try to
fix it and get the builds started again today (but I'm quite busy,
so.... lets hope it's an easy fix!)
