For what it's worth, if it helps I can pitch in and test.
I have a QNAP HS-210 and a TS-212P that I've retired since the first
time I read that Debian would drop armel arch. I know there have been
workarounds the limitations, and I keep having plans to implement at
least one. But! Good intentions and all! :-)
...
Philippe
------
The trouble with common sense is that it is so uncommon.
(Anonymous)
On 9/11/23 17:06, bodhi wrote:
On Monday, September 11, 2023 at 12:10:04 AM UTC-7, Gianluca Renzi wrote:
On 9/10/23 04:55, Paul Wise wrote:
On Sat, 2023-09-09 at 11:42 +0200, Bastian Blank wrote:
The first one is the one with included size limitations, because those
load the kernel from a pre-defined flash partition, whose size can't be
easily changed by the user. This one is now overflowing for the second
to last documented one in the kernel package config.
Seems like this would be solvable by writing a bootloader to the flash
partition that would be able to load Linux from a normal filesystem?
I think any modern (at least more than 10 years of lifespan) bootloader
(u-boot, redboot, barebox, etc.,...) can read from any supported
filesystem (at least ext2, ext3 and ext4 and maybe nand-related
filesystems like yaffs, yaffs2, ubifs), so having the {z|u}Image kernel
stored on those filesystems should be not an issue...
The biggest problem will be the update procedures for those hardware.
All scripts must be changed to reflect the new partition scheme. This is
*not* an easy fix.
I agreed with Paul and also Gianluca. I'm the u-boot maintainer for many
Marvell Kirkwood SoC boards. All these boards are actively maintained and up to
modern standard, i.e. can boot with file systems on SATA, USB, MMC... We can
ignore what's currently in flash partitions and boot with kernels on disk
rootfs.
What can I do to help in upgrading the update procedure to boot Debian 12 on
Marvell Kirkwood SoCs? can somebody give me some pointer where to start looking
for these scripts?
All the best,
Tony
Just my $0.02
Regards
Gianluca
--
Eurek s.r.l. |
Electronic Engineering | http://www.eurek.it
via Celletta 8/B, 40026 Imola, Italy | Phone: +39-(0)542-609120
p.iva 00690621206 - c.f. 04020030377 | Fax: +39-(0)542-609212
