"Jens-E. Hansen" wrote: > > Hi, > > > My build of mosix 1.0.3 resulted in a kernel that paniced just after > > the login promped came up on the dual CPU system (kernel BUG in > > <somefile I wrote down but don't have the paper with me>). > > > I have three more scavenged systems (one ppro 200, and two dual ppro > > 200's), I'll be adding in this week. So if anyone's interested in > > hearing my continuing saga, let me know. > > I'm very interested in the continuing saga because my system (mosix 1.0.3) > kernel paniced immediately after startup. Maybe this is a gcc-problem ? > I compiled the kernel with gcc 2.95.4. Unfortionately I have no possibility to > compile the kernel with the recommended gcc.
For a while my system was panicked immediately after boot as well. I got past this by turning the Mosix File System options off in the kernel. I have two nodes: one AMD Athlon 1133, and a Athlon K6-2 350. The both start up and operate fine, and I mtop reports the load for both nodes. However, as soon as I send a process to the other node, that other node panicks :-( This goes both ways. The above is with a manual install using the mosix instructions; I haven't had a chance yet to try out the shiny new deb packages yet. -- Regards, Wim Kerkhoff, Software Engineer Merilus, Inc. -|- http://www.merilus.com Email: [EMAIL PROTECTED]
