Your message dated Mon, 6 Oct 2008 00:53:33 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Re: Bug#488066: installation-reports
has caused the Debian Bug report #488066,
regarding installation-reports
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [EMAIL PROTECTED]
immediately.)
--
488066: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=488066
Debian Bug Tracking System
Contact [EMAIL PROTECTED] with problems
--- Begin Message ---
Package: installation-reports
I try to install Debian on a RAID 0, using the "install dmraid=true" command.
Boot method: iso DVD
Image version: Lenny for amd64, downloaded in April 2008
Date: 26/06/08
Machine: MoBo Asus M2N sli Deluxe, 2 Maxtor HDD
Processor:AMD athlon x2 3.2Ghz
Memory:2 Gb RAM, 2x160 Gb on HDD
Partitions: separated /usr, /var, /tmp and /home
Output of lspci -knn (or lspci -nn): No terminal available
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [o]
Detect network card: [o]
Configure network: [o]
Detect CD: [o]
Load installer modules: [o]
Detect hard drives: [o] (RAID 0 successfully detected)
Partition hard drives: [E]
-> Every partition seem to be created correctly, but finaly the SWAP
fails.
After that, the partition manager shows a pri/log ext3 partition.
I tried to delete this to retry the process.
It fails because of "too much boot sectors" (as I try to remember).
I made a disk wipping (using Hard Disk Manager 5.5), so I could try again the
partitionning process, that fails again at the SWAP.
Install base system: [ ]
Clock/timezone setup: [o]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--- End Message ---
--- Begin Message ---
On Thursday 26 June 2008, Werquin Lucas wrote:
> Partition hard drives: [E]
> -> Every partition seem to be created correctly, but finaly the SWAP
> fails. After that, the partition manager shows a pri/log ext3
> partition. I tried to delete this to retry the process.
> It fails because of "too much boot sectors" (as I try to remember).
Recently the support for dmraid in partman has been improved significantly
and some issues with grub installations have been fixed.
I expect this will have also fixed the problem you had.
Please see http://wiki.debian.org/DebianInstaller/SataRaid for current
status and instructions for installing Debian on a Serial ATA RAID
device.
Cheers,
FJP
--- End Message ---
