Your message dated Thu, 29 Aug 2013 23:28:11 +0200
with message-id <[email protected]>
and subject line dealing with old installation-reports
has caused the Debian Bug report #690938,
regarding installation report, System76 Gazelle Value (GAZ-V5) - one failure,
eventual success
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
690938: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=690938
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: installation-reports
Boot method: USB netinst
Image version:
http://napoleon.acc.umu.se/cdimage/wheezy_di_beta3/amd64/iso-cd/debian-wheezy-DI-b3-amd64-netinst.iso
Date: 2012-10-18T22:45/19T00:45
Machine: System76 Gazelle (Compal FT01)
Processor:
root@wheezy:~# grep model\ name /proc/cpuinfo | uniq -c
2 model name : Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz
root@wheezy:~#
Memory: MemTotal: 2051800 kB [grep MemTotal /proc/meminfo]
Partitions:
root@wheezy:~# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000cddad
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 226093055 113045504 83 Linux
/dev/sda2 226095102 234440703 4172801 5 Extended
/dev/sda5 226095104 234440703 4172800 82 Linux swap / Solaris
root@wheezy:~#
Output of lspci -knn (or lspci -nn):
root@wheezy:~# lspci -knn
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960
Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 0c)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960
Integrated Graphics Controller (secondary) [8086:2a03] (rev 0c)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #4 [8086:2834] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #5 [8086:2835] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2
EHCI Controller #2 [8086:283a] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD
Audio Controller [8086:284b] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 1 [8086:283f] (rev 03)
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 2 [8086:2841] (rev 03)
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 3 [8086:2843] (rev 03)
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 4 [8086:2845] (rev 03)
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 5 [8086:2847] (rev 03)
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI
Express Port 6 [8086:2849] (rev 03)
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #1 [8086:2830] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #2 [8086:2831] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB
UHCI Controller #3 [8086:2832] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2
EHCI Controller #1 [8086:2836] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface
Controller [8086:2815] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E)
IDE Controller [8086:2850] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: ata_piix
00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM
(ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus
Controller [8086:283e] (rev 03)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: i801_smbus
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M
Fast Ethernet PCI Express [14e4:1713] (rev 02)
Subsystem: COMPAL Electronics Inc Device [14c0:0026]
Kernel driver in use: tg3
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG
or AGN [Kedron] Network Connection [8086:4229] (rev 61)
Subsystem: Intel Corporation Vaio VGN-SZ79SN_C [8086:1100]
0e:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394
Controller [1180:0832] (rev 05)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: firewire_ohci
0e:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter [1180:0822] (rev 22)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: sdhci-pci
0e:06.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [1180:0592] (rev 12)
Subsystem: COMPAL Electronics Inc Device [14c0:0024]
Kernel driver in use: r592
root@wheezy:~#
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Install base system: [E]
Clock/timezone setup: [O]
User/password setup: [O]
Install tasks: [ ]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
My first attempt to install wheezy failed; the second was successful. The
initial failure wiped out the (unimportant, to me) existing data on the
hard drive, which I had tried to leave in-place on the first attempt.
tried to install wheezy beta 3 from usb
- sudo dd if=Desktop/debian-wheezy-DI-b3-amd64-netinst.iso of=/dev/sdb
bs=4096
- 2GB USB stick
- no obvious errors
- iso has correct md5sum
- e9f2479c43a623dd8b9c0bc95d8460ce
Desktop/debian-wheezy-DI-b3-amd64-netinst.iso
- press tab when install menu comes up, add "desktop=kde" (without the
quotes), press enter [normal installer, not graphical installer]
- plugged in ethernet cable at the language selection screen
- for some reason, when prompted for components, "desktop environment"
wasn't auto-selected. I added it. Laptop, ssh, maybe one other at
the bottom were all already correctly selected, I left those alone.
- selected auto partitioning, using largest contiguous free space,
only use one partition for all directories
- no particular reason to leave existing Squeeze installation in
place, but thought it might be nice to see how nicely the Wheezy
installer plays with Squeeze on a hdd
- failed at some point during the install phase
- "select and install software" had been progressing normally, as if
it would take roughly half an hour, total; I thought there should
still be 5-10 minutes left when things failed
- I *think* it was still downloading files when things broke. But
I'm not positive: I wasn't paying that close of attention.
- suddenly had a red screen saying something had failed and I could
retry the individual step
- retried the highlighted step, to install software, twice. Both
times got the same red screen.
- gave up, exited installation, causing laptop to reboot.
- was able to press F12 for boot selection menu, but then couldn't
change selection (i.e. needed to press the down arrow three
times to select the USB drive; nothing happened when I pressed
that key).
- F12 key is loose (key isn't fully connected to keyboard), so
may have been a hardware error on my end.
power cycled, tried the install from scratch
- same USB stick (didn't try to re-write the image to it)
- added 'desktop=kde' again
- this time, when selecting components, desktop environment *was*
auto-selected. So was print server, though, which I didn't
expect; I deselected that. The "bottom 3" (ssh, laptop, ummmm
something else?) were also selected, like last time, which I
expected and didn't try to change.
- no longer had the option to install to free space
- does this imply the original install attempt did something bad to
the drive?
- selected auto partitioning, full drive, only use one partititon
- installation was successful
- probably irrelevant, but grub menu had unexpected extra entries.
Complete menu:
- Debian GNU/Linux, with Linux 3.2.0-3-amd64
- Debian GNU/Linux, with Linux 3.2.0-3-amd64 (recover mode)
- Debian GNU/Linux (wheezy/sid) (on /dev/sdb5)
- Debian GNU/Linux (wheezy/sid) (on /dev/sdb5)
- Debian GNU/Linux (wheezy/sid) (on /dev/sdb5)
- Debian GNU/Linux (wheezy/sid) (on /dev/sdb5)
- Debian GNU/Linux (wheezy/sid) (on /dev/sdb5)
I selected the first, and booted successfully into a KDE desktop
Partitions and lspci output, above, are after the second, successful
boot attempt into wheezy-KDE.
--- End Message ---
--- Begin Message ---
reasign 691666 debian-installer
severity 691666 wishlist
merge 704768 691666
retitle 704768 please suport neo2, dvorak, french bépo, ..., keyboard layouts
tags 704768 +wontfix
retitle 685801 Wheezy LXDE live system can't boot on Asus EeePC 1015BX netbook
thanks
Hi,
thank you for submitting installation reports, much appreciated.
I read through all the bugs mentioned here (and I'm sure they were read by
several people at the time they were submitted) and am closing them now as/if
- they (finally) indicated success and/or
- I know from first hand experience that the functionality is working in
Wheezy and/or
- they only contained very little information and/or
- they contained user errors and/or
- they were caused by broken hardware and/or
- they have been from a development phase where things were not stable and/or
- they are quite old (and thus likely fixed today) and/or
- moreinfo was asked and not given.
If I've closed a bug incorrectly please do reply (it's easy to reopen and I'll
do if requested) or just file a new one - thats often better, as the bug log
will be clearer and shorter and not contain cruft.
cheers,
Holger
signature.asc
Description: This is a digitally signed message part.
--- End Message ---
