Package: installation-reports Severity: normal Debian-installer-version: Oct 13 i386 net installer cd uname -a: Linux parus 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i686 GNU/Linux Date: 2004-10-15 Method: net installer cd
Machine: Shuttle SN85G4V2 Processor: AMD64 Memory: 1Gig Root Device: Seagate 200 GB serial ATA Root Size/partition table: irrelevant Output of lspci and lspci -n: 0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4) 0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6) 0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4) 0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) 0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) 0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) 0000:00:05.0 Ethernet controller: nVidia Corporation nForce3 Ethernet (rev a5) 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2) 0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) 0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) 0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:06.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 0000:01:07.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01) 0000:02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) 0000:00:00.0 0600: 10de:00d1 (rev a4) 0000:00:01.0 0601: 10de:00d0 (rev a6) 0000:00:01.1 0c05: 10de:00d4 (rev a4) 0000:00:02.0 0c03: 10de:00d7 (rev a5) 0000:00:02.1 0c03: 10de:00d7 (rev a5) 0000:00:02.2 0c03: 10de:00d8 (rev a2) 0000:00:05.0 0200: 10de:00d6 (rev a5) 0000:00:06.0 0401: 10de:00da (rev a2) 0000:00:08.0 0101: 10de:00d5 (rev a5) 0000:00:0a.0 0604: 10de:00dd (rev a2) 0000:00:0b.0 0604: 10de:00d2 (rev a4) 0000:00:18.0 0600: 1022:1100 0000:00:18.1 0600: 1022:1101 0000:00:18.2 0600: 1022:1102 0000:00:18.3 0600: 1022:1103 0000:01:06.0 0c00: 1106:3044 (rev 80) 0000:01:07.0 0104: 1095:3512 (rev 01) 0000:02:00.0 0300: 10de:0322 (rev a1) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: 1 problem: The installed OS was unable to detect the CD rom. I was able to fix this by adding 'ide-generic' to /etc/modules. I did a basic sarge install before upgrading to sid, which is what I run on my other 3 Debian machines. -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 2.6.8-1-386 Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
