Package: installation-reports
INSTALL REPORT
Debian-installer-version: Debian Installer RC2
uname -a: Linux cain 2.4.27-1-386 #1 Wed Dec 1 19:43:08 JST 2004 i686 GNU/Linux
Date: 2004-12-09 11:53
Method:
Installed from Debian Installer RC2 netinstall.
Booted of the CD.
Packages downloaded unproxied from ftp://ftp.se.debian.org/
Machine: Dell XPS Gen 3 Processor: Intel P4 3.4 GHz Memory: 1 GB Root Device: Ide (hda). Root Size/partition table: Filesystem 1K-blocks Used Available Use% Mounted on /dev/hda2 255944 101172 141117 42% / tmpfs 452704 0 452704 0% /dev/shm /dev/hda9 127696896 1734152 119476104 2% /home /dev/hda8 369000 8325 341015 3% /tmp /dev/hda5 4807056 2366712 2196160 52% /usr /dev/hdb2 21734420 132572 20497784 1% /usr/local /dev/hda6 2885780 790000 1949192 29% /var
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 925X Memory Controller Hub (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 925X PCI Express Root Port (rev 04)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 554b
0000:01:00.1 Display controller: ATI Technologies Inc: Unknown device 556b
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
0000:04:01.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
0000:04:01.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
0000:04:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
------ 0000:00:00.0 0600: 8086:2584 (rev 04) 0000:00:01.0 0604: 8086:2585 (rev 04) 0000:00:1c.0 0604: 8086:2660 (rev 03) 0000:00:1c.1 0604: 8086:2662 (rev 03) 0000:00:1d.0 0c03: 8086:2658 (rev 03) 0000:00:1d.1 0c03: 8086:2659 (rev 03) 0000:00:1d.2 0c03: 8086:265a (rev 03) 0000:00:1d.3 0c03: 8086:265b (rev 03) 0000:00:1d.7 0c03: 8086:265c (rev 03) 0000:00:1e.0 0604: 8086:244e (rev d3) 0000:00:1f.0 0601: 8086:2640 (rev 03) 0000:00:1f.2 0101: 8086:2652 (rev 03) 0000:00:1f.3 0c05: 8086:266a (rev 03) 0000:01:00.0 0300: 1002:554b 0000:01:00.1 0380: 1002:556b 0000:02:00.0 0200: 14e4:1677 (rev 01) 0000:04:01.0 0401: 1102:0004 (rev 04) 0000:04:01.2 0c00: 1102:4001 (rev 04) 0000:04:07.0 0c00: 104c:8024
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O]
Comments/Problems:
The Dell XPS comes default with dual raid configured sata disks. D-I is unable to
detect the drives or the raid. Entering the bios and disabling the raid and enabling
pata access solved the problem, to the extent that a base system could be installed.
Unfortunately, the 2.4 kernel is unable to enable DMA for the harddrives and 2.6.9 as
distributed by debian unstable is unable to boot.
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to [EMAIL PROTECTED]
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
