Package: installation-reports
Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc2/sarge-i386-netinst.iso from 18. December 2004
uname -a: <Die Ausgabe, wenn Sie �uname -a� auf der Befehlszeile ausf�hren> Date: 18. December 2004, 23 Uhr Method: networkinstallation-CD-Image, see link under "Installer-Version" Machine: Mainboard Elitegroup K7S5A Processor: Athlon 2200+ Memory: 512MB Root Device: have not reached this Point Root Size/partition table: have not reached this Point Output of lspci and lspci -n: have not reached this Point
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [ ] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ]
Comments/Problems: System hangs on hardware detecting at 92%. But it works after I removed the SATA Controller from DAWI "DC-150 RAID" with Silicon Image Chip "SIL3112ACT144".
best regards
Axel Hilgenfeld
