Your message dated Sat, 15 Apr 2006 18:49:11 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Bug#362761: install report, considered succesfull
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: installation-reports
INSTALL REPORT
Debian-installer-version: Debian 3.1r0a DVD iso image, deleted.
uname -a: Linux debian 2.6.8-2-686 #1 Thu May 19 17:53:30 JST 2005 i686
GNU/Linux
Date: 04., February, 2006., 18:28
Method: Installed from the first Debian3.1r0a DVD-iso.
Machine: IBM Desktop PC clone
Processor: Intel Celeron II. Coppermine 900MHz
Memory: 384MB
Root Device: IDE, /dev/hda
Root Size/partition table:
/dev/hda5 is the root partition.
Disk /dev/hda: 40.0 GB, 40027029504 bytes
16 heads, 63 sectors/track, 77557 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 40641 20482843+ c W95 FAT32 (LBA)
Partition 1 does not end on cylinder boundary.
/dev/hda2 40641 41135 249007+ 82 Linux swap / Solaris
/dev/hda3 * 41135 53280 6120765 83 Linux
/dev/hda4 53280 77552 12233497+ 5 Extended
Partition 4 does not end on cylinder boundary.
/dev/hda5 * 53280 65424 6120733+ 83 Linux
/dev/hda6 * 65424 77552 6112701 83 Linux
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo
PRO133x] (rev c4)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 16)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 16)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
40)
0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
0000:00:0b.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev
07)
0000:00:0b.1 Input device controller: Creative Labs SB Live! MIDI/Game Port
(rev 07)
0000:00:0c.0 USB Controller: OPTi Inc. 82C861 (rev 10)
0000:01:00.0 VGA compatible controller: S3 Inc. Savage 4 (rev 03)
0000:00:00.0 0600: 1106:0691 (rev c4)
0000:00:01.0 0604: 1106:8598
0000:00:07.0 0601: 1106:0686 (rev 40)
0000:00:07.1 0101: 1106:0571 (rev 06)
0000:00:07.2 0c03: 1106:3038 (rev 16)
0000:00:07.3 0c03: 1106:3038 (rev 16)
0000:00:07.4 0680: 1106:3057 (rev 40)
0000:00:09.0 0200: 10ec:8139 (rev 10)
0000:00:0b.0 0401: 1102:0002 (rev 07)
0000:00:0b.1 0980: 1102:7002 (rev 07)
0000:00:0c.0 0c03: 1045:c861 (rev 10)
0000:01:00.0 0300: 5333:8a22 (rev 03)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [E]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
The automatic installation halted and jumped to manually mode when the
ethernet device not founded. After select card all things worked correctly.
for 'Config network': Remembering the 3.0 installer was helpfulled. The fields
allways filled with 'default' or standard parameters. For example: 192.168.1.1
for default IP, or 192.168.1.x for default gateway.
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
Install logs and other status info is available in /var/log/debian-installer/.
Once you have filled out this report, mail it to [EMAIL PROTECTED]
--- End Message ---
--- Begin Message ---
On Sat, Apr 15, 2006 at 01:35:17PM +0200, [EMAIL PROTECTED] wrote:
> Package: installation-reports
>
> INSTALL REPORT
>
> Debian-installer-version: Debian 3.1r0a DVD iso image, deleted.
> uname -a: Linux debian 2.6.8-2-686 #1 Thu May 19 17:53:30 JST 2005 i686
> GNU/Linux
> Date: 04., February, 2006., 18:28
> Method: Installed from the first Debian3.1r0a DVD-iso.
>
> Output of lspci and lspci -n:
> 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 16)
> 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 16)
> 0000:00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> 0000:00:0c.0 USB Controller: OPTi Inc. 82C861 (rev 10)
>
> 0000:00:07.2 0c03: 1106:3038 (rev 16)
> 0000:00:07.3 0c03: 1106:3038 (rev 16)
> 0000:00:09.0 0200: 10ec:8139 (rev 10)
> 0000:00:0c.0 0c03: 1045:c861 (rev 10)
>
> Base System Installation Checklist:
> [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
>
> Initial boot worked: [O]
> Configure network HW: [E]
> Config network: [O]
> Detect CD: [O]
[ further all OK ]
>
> Comments/Problems:
> The automatic installation halted and jumped to manually mode when the
> ethernet device not founded. After select card all things worked correctly.
> for 'Config network': Remembering the 3.0 installer was helpfulled. The fields
> allways filled with 'default' or standard parameters. For example: 192.168.1.1
> for default IP, or 192.168.1.x for default gateway.
Where not detecting a regular card like a Realtek 8139 is interresting,
I deciced to close this install report.
The reporter has a working system and new releases of Debian-Installer
allready use a different hardware detection method as in this report.
To: [EMAIL PROTECTED], thank you for reporting
and have fun with you Debian GNU/Linux computer.
Cheers
Geert Stappers
--- End Message ---