Package: installation-reports INSTALL REPORT
Debian-installer-version: May 29, 'etch' - minimal CD net-install. uname -a: Linux bareketh 2.6.15-1-amd64-generic #2 Tue Mar 7 06:24:40 UTC 2006 x86_64 GNU/Linux Date: May 29, 15:00 (GMT+3) Method: Network install, no proxy. Using LAN behind a router connected to the Internet. Sources list: deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot amd64 Binary-1 (20060314)]/ etch main deb http://mirror.espri.arizona.edu/debian-amd64/debian/ etch main deb-src http://mirror.espri.arizona.edu/debian-amd64/debian/ etch main Machine: Motherboard: ASUS P5GV-MX Processor: Intel P4 x86_64t with 2M cache. Memory: 512MB Root Device: /dev/sda1 on / type ext3 (rw,errors=remount-ro) (SATA2) Root Size/partition table: bareketh:~# cat /proc/partitions major minor #blocks name 8 0 156290904 sda 8 1 154818373 sda1 // ext3 8 2 1 sda2 8 5 1469916 sda5 // swap Output of lspci and lspci -n: bareketh:~# lspci 0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller (rev 0e) 0000:00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller (rev 0e) 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04) 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04) 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 04) 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04) 0000:00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 04) 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04) 0000:01:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) bareketh:~# lspci -n 0000:00:00.0 0600: 8086:2580 (rev 0e) 0000:00:02.0 0300: 8086:2582 (rev 0e) 0000:00:1b.0 0403: 8086:2668 (rev 04) 0000:00:1c.0 0604: 8086:2660 (rev 04) 0000:00:1d.0 0c03: 8086:2658 (rev 04) 0000:00:1d.1 0c03: 8086:2659 (rev 04) 0000:00:1d.2 0c03: 8086:265a (rev 04) 0000:00:1d.3 0c03: 8086:265b (rev 04) 0000:00:1d.7 0c03: 8086:265c (rev 04) 0000:00:1e.0 0604: 8086:244e (rev d4) 0000:00:1f.0 0601: 8086:2640 (rev 04) 0000:00:1f.1 0101: 8086:266f (rev 04) 0000:00:1f.2 0101: 8086:2651 (rev 04) 0000:00:1f.3 0c05: 8086:266a (rev 04) 0000:01:02.0 0200: 10ec:8139 (rev 10) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: The system was installed as a sever - i.e. no X11 server. All is OK!! I just wish the base installation will add "contrib" to the sources list. My favorite editor is xemacs, which requires "contrib". Also, many other tools need it. Still, great work! The Israely deb mirror did not work properly (and I am from Israel). So I used arizona.edu instead. -- Shoham Levy -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
