Your message dated Tue, 22 Aug 2006 23:28:43 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Bug#247260: can be closed
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: installation-reports
Debian-installer-version:
Beta 4; May 2nd 2004;
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/beta4/sarge-i386-netinst.iso
uname -a:
Linux linuxbox 2.6.3-1-386 #2 Tue Feb 24 20:20:23 EST 2004 i686 GNU/Linux
Date:
May 3rd 2004; ~ 1500h UTC
Method:
booted off CD with netinst.iso; base system from CD, rest from ftp.leo.org
Machine:
Via Epia 800 resp. 5000 motherboard
Processor:
C3 800MHz/500MHz
Memory:
256MB
Root Device:
IDE; /dev/hda
Root Size/partition table:
Disk /dev/hda: 13.5 GB, 13578485760 bytes
16 heads, 63 sectors/track, 26310 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 25317 12759736+ 83 Linux
/dev/hda2 25318 26310 500472 f W95 Ext'd (LBA)
/dev/hda5 25318 26310 500440+ 82 Linux swap
Output of lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo
ProMedia] (rev 05)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP]
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA
Bridge] (rev 10)
0000:00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235 PIPC Bus Master IDE (rev 06)
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 24)
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 24)
0000:00:11.4 Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 10)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc.
VT82C686 AC97 Audio Controller (rev 40)
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102
[Rhine-II] (rev 51)
0000:00:14.0 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 50)
0000:00:14.1 USB Controller: VIA Technologies, Inc. VT6202 [USB 2.0
controller] (rev 50)
0000:00:14.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
0000:01:00.0 VGA compatible controller: Trident Microsystems
CyberBlade/i1 (rev 6a)
Base System Installation Checklist:
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Comments/Problems:
The installer is (almost) perfect! Didn't use Debian 'til yesterday
because installing was a hassle.
Minor problem: I selected German as installation language, while the
umlaute (ä& etc.) showed up correctly in the console etc. they were
messed up in the installer's messages.
--- End Message ---
--- Begin Message ---
On Tuesday 22 August 2006 22:48, Holger Wansing wrote:
> No! I tested that with a daily build from 22.08.06: the problem
> which is described in #247260 is fixed.
Closing. Thanks.
--- End Message ---
