Package: installation-reports Boot method: netinst CD Image version: cdimage/daily-builds downloaded 2006.10.19 http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/ Date: Fri Oct 20 09:22:46 EDT 2006
Machine: HP Pavillion D5130ca Processor: AMD Turion64 2GHz Memory: 1Gb Partitions: Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/hda2 ext3 19228308 3656716 14594840 21% / udev tmpfs 10240 64 10176 1% /dev devshm tmpfs 513268 0 513268 0% /dev/shm /dev/hda4 ext3 74999388 26307976 44881600 37% /a /dev/hda1 ext3 19228276 5179504 13072024 29% /b Output of lspci and lspci -n: [~]$ lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI Technologies Inc Unknown device 5a37 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 11) 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI IDE Controller ATI 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP SB400 AC'97 Audio Controller (rev 02) 00:14.6 Modem: ATI Technologies Inc ATI SB400 - AC'97 Modem Controller (rev 02) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)06:02.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02) 06:04.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller 06:04.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller 06:04.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller 06:04.4 Generic system peripheral [0805]: Texas Instruments PCI6411, PCI6421, PCI6611, PCI6621, PCI7411, PCI7421, PCI7611, PCI7621 Secure Digital (SD) Controller 06:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) [~]$ lspci -n 00:00.0 0600: 1002:5950 (rev 01) 00:01.0 0604: 1002:5a3f 00:05.0 0604: 1002:5a37 00:13.0 0c03: 1002:4374 00:13.1 0c03: 1002:4375 00:13.2 0c03: 1002:4373 00:14.0 0c05: 1002:4372 (rev 11) 00:14.1 0101: 1002:4376 00:14.3 0601: 1002:4377 00:14.4 0604: 1002:4371 00:14.5 0401: 1002:4370 (rev 02) 00:14.6 0703: 1002:4378 (rev 02) 00:18.0 0600: 1022:1100 00:18.1 0600: 1022:1101 00:18.2 0600: 1022:1102 00:18.3 0600: 1022:1103 01:05.0 0300: 1002:5955 06:02.0 0280: 14e4:4318 (rev 02) 06:04.0 0607: 104c:8031 06:04.2 0c00: 104c:8032 06:04.3 0180: 104c:8033 06:04.4 0805: 104c:8034 06:06.0 0200: 10ec:8139 (rev 10) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Trouble free install. Even got the correct 1280x800 widescreen configuration of X automatically. Great work guys! Probably would have had problems if I had tried to use the wireless network because of: bcm43xx: Error: Microcode "bcm43xx_microcode5.fw" not available or load failed -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
