* Martin Michlmayr <[EMAIL PROTECTED]> [2006-11-19 21:41]:
> - cobalt: RTC not working but checking 2.6.17 I see it's a problem
> there too. Will investigate.
So this isn't as bad to what I initially thought. What happens is
that the time in d-i is set to Jan 1 2000 but the installation itself
works fine. The only problem is that e2fsck is run on the root and it
will reboot once, but then it will boot properly.
I'm not quite sure why it's 2000 though because the hardware has the
right time. From within d-i, I went into the chroot and issues the
following commands:
sh-3.1# hwclock -r
Tue Nov 21 14:51:21 2006 -0.344000 seconds
sh-3.1# date -R
Sat, 01 Jan 2000 01:01:17 +0100
sh-3.1# hwclock --hctosys
sh-3.1# date -R
Tue, 21 Nov 2006 14:51:49 +0100
sh-3.1#
Does anyone know why date and hwclock disagree? Thiemo?
--
Martin Michlmayr
http://www.cyrius.com/
[d-i]
The system is going down NOW !!
Sending SIGTERM to all processes.
Sending SIGKILL to all processes.
Please stand by while rebooting the system.
Restarting system.
.
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999
1.LCD Test................................PASS
2.Controller Test.........................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................64M
7.Bank 2:.................................0M
8.Bank 3:.................................0M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER ramcode: selected partition /dev/hda1
Decompressing -\|/-\|/-\|/-\| done
Executing bootloader kernel...
Decompressing -/-\ done.
[ "CoLo" v1.22 ]
stage2: 87fa0000-88000000
cpu: clock 250.000MHz
pci: unit type <RaQ2>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:eb:8d}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> mount
ide: {SAMSUNG WN321620A (2.16 GB)}
ide: LBA 4219488
ide: supports PIO mode 4
ide: mode 4 timing
ide: partition 1
ext2: revision 0
1> lcd 'Booting...' /dev/{mounted-volume}
1> -load /boot/default.colo
ext2: {boot/default.colo} --> {./default.colo}
000000bf 191t
1> -script
2> mount hda1
ext2: revision 0
2> load /vmlinux
ext2: {vmlinux} --> {vmlinux-2.6.17-2-r5k-cobalt}
0033561c 3364380t
2> lcd "Booting Debian"
2> var cons_opts ''
2> -var cons_opts console=ttyS0,{console-speed}
2> execute root=/dev/hda2 {cons_opts}
elf32: 00080000 - 0032301f (802df000) (ffffffff.80000000)
elf32: 80080000 (80080000) 2605190t + 159642t
Linux version 2.6.17-2-r5k-cobalt (Debian 2.6.17-9) ([EMAIL PROTECTED]) (gcc
version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 Wed Sep 13 17:01:10
UTC 2006
CPU revision is: 000028a0
FPU revision is: 000028a0
Cobalt board ID: 6
Cobalt: early console registered
Determined physical RAM map:
memory: 08000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: root=/dev/hda2 console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 1024 (order: 10, 4096 bytes)
Linux version 2.6.17-2-r5k-cobalt (Debian 2.6.17-9) ([EMAIL PROTECTED]) (gcc
version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 Wed Sep 13 17:01:10
UTC 2006
CPU revision is: 000028a0
FPU revision is: 000028a0
Cobalt board ID: 6
Cobalt: early console registered
Determined physical RAM map:
memory: 08000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: root=/dev/hda2 console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126592k/131072k available (1985k kernel code, 4348k reserved, 439k
data, 120k init, 0k highmem)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Galileo: fixed bridge class
Galileo: revision 17
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(946684800.156:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Activating ISA DMA hang workarounds.
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.12ac
Cobalt LCD Driver v2.10
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
�serial8250: ttyS0 at I/O 0xc800000 (irq = 21) is a ST16650V2
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Linux Tulip driver version 1.1.13 (December 15, 2004)
PCI: Enabling device 0000:00:07.0 (0045 -> 0047)
tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at b2080000, 00:10:E0:00:EB:8D, IRQ 19.
PCI: Enabling device 0000:00:0c.0 (0005 -> 0007)
tulip1: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at b2080400, 00:10:E0:00:ED:21, IRQ 20.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:09.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:09.1
ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG WN321620A (2.16 GB), ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 4219488 sectors (2160 MB) w/109KiB Cache, CHS=4186/16/63
hda: hda1 hda2 hda3 < hda5 hda6 >
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...usbcore: registered new driver usbfs
usbcore: registered new driver hub
SCSI subsystem initialized
sym0: <860> rev 0x2 at pci 0000:00:08.0 irq 19
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
USB Universal Host Controller Interface driver v3.0
0:0:0:0: ABORT operation started.
0:0:0:0: ABORT operation timed-out.
0:0:0:0: DEVICE RESET operation started.
0:0:0:0: DEVICE RESET operation timed-out.
0:0:0:0: BUS RESET operation started.
0:0:0:0: BUS RESET operation timed-out.
0:0:0:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:0:0: HOST RESET operation timed-out.
0:0:0:0: scsi: Device offlined - not ready after error recovery
0:0:1:0: ABORT operation started.
0:0:1:0: ABORT operation timed-out.
0:0:1:0: DEVICE RESET operation started.
0:0:1:0: DEVICE RESET operation timed-out.
0:0:1:0: BUS RESET operation started.
0:0:1:0: BUS RESET operation timed-out.
0:0:1:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:1:0: HOST RESET operation timed-out.
0:0:1:0: scsi: Device offlined - not ready after error recovery
0:0:2:0: ABORT operation started.
0:0:2:0: ABORT operation timed-out.
0:0:2:0: DEVICE RESET operation started.
0:0:2:0: DEVICE RESET operation timed-out.
0:0:2:0: BUS RESET operation started.
0:0:2:0: BUS RESET operation timed-out.
0:0:2:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:2:0: HOST RESET operation timed-out.
0:0:2:0: scsi: Device offlined - not ready after error recovery
0:0:3:0: ABORT operation started.
0:0:3:0: ABORT operation timed-out.
0:0:3:0: DEVICE RESET operation started.
0:0:3:0: DEVICE RESET operation timed-out.
0:0:3:0: BUS RESET operation started.
0:0:3:0: BUS RESET operation timed-out.
0:0:3:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:3:0: HOST RESET operation timed-out.
0:0:3:0: scsi: Device offlined - not ready after error recovery
0:0:4:0: ABORT operation started.
0:0:4:0: ABORT operation timed-out.
0:0:4:0: DEVICE RESET operation started.
0:0:4:0: DEVICE RESET operation timed-out.
0:0:4:0: BUS RESET operation started.
0:0:4:0: BUS RESET operation timed-out.
0:0:4:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:4:0: HOST RESET operation timed-out.
0:0:4:0: scsi: Device offlined - not ready after error recovery
0:0:5:0: ABORT operation started.
0:0:5:0: ABORT operation timed-out.
0:0:5:0: DEVICE RESET operation started.
0:0:5:0: DEVICE RESET operation timed-out.
0:0:5:0: BUS RESET operation started.
0:0:5:0: BUS RESET operation timed-out.
0:0:5:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:5:0: HOST RESET operation timed-out.
0:0:5:0: scsi: Device offlined - not ready after error recovery
0:0:6:0: ABORT operation started.
0:0:6:0: ABORT operation timed-out.
0:0:6:0: DEVICE RESET operation started.
0:0:6:0: DEVICE RESET operation timed-out.
0:0:6:0: BUS RESET operation started.
0:0:6:0: BUS RESET operation timed-out.
0:0:6:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
done.
Sat, 01 Jan 2000 01:03:15 +0100
Activating swap...Adding 104380k swap on /dev/hda5. Priority:-1 extents:1
across:104380k
done.
Checking root file system...fsck 1.40-WIP (02-Oct-2006)
/dev/hda2: Superblock last mount time is in the future. FIXED.
/dev/hda2: Superblock last write time is in the future. FIXED.
/dev/hda2 has gone 49710 days without being checked, check forced.
/dev/hda2: |====== | 10.0%
0:0:6:0: HOST RESET operation timed-out.
0:0:6:0: scsi: Device offlined - not ready after error recovery
PCI: Enabling device 0000:00:09.2 (0000 -> 0001)
uhci_hcd 0000:00:09.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:09.2 setup!
uhci_hcd 0000:00:09.2: init 0000:00:09.2 fail, -19
/dev/hda2: |=========== / 20.0%
/dev/hda2: |================= - 30.0%
/dev/hda2: |====================== \ 40.0%
/dev/hda2: |============================ | 50.0%
/dev/hda2: |================================== / 60.0%
/dev/hda2: |======================================= - 70.0%
/dev/hda2: |======================================= \ 70.2%
/dev/hda2: |======================================== | 70.6%
/dev/hda2: |======================================== / 70.9%
/dev/hda2: |======================================== - 71.2%
/dev/hda2: |======================================== \ 71.5%
/dev/hda2: |======================================== | 71.7%
/dev/hda2: |======================================== / 72.0%
/dev/hda2: |======================================== - 72.2%
/dev/hda2: |========================================= \ 72.4%
/dev/hda2: |========================================= | 72.6%
/dev/hda2: |========================================= / 72.8%
/dev/hda2: |========================================= - 73.1%
/dev/hda2: |========================================= \ 73.3%
/dev/hda2: |========================================= | 73.5%
/dev/hda2: |========================================= / 73.8%
/dev/hda2: |========================================== - 74.2%
/dev/hda2: |========================================== \ 74.5%
/dev/hda2: |========================================== | 74.7%
/dev/hda2: |========================================== / 75.0%
/dev/hda2: |========================================== - 75.3%
/dev/hda2: |========================================== \ 75.6%
/dev/hda2: |========================================== | 75.9%
/dev/hda2: |=========================================== / 76.2%
/dev/hda2: |=========================================== - 76.4%
/dev/hda2: |=========================================== \ 76.6%
/dev/hda2: |=========================================== | 76.8%
/dev/hda2: |=========================================== / 77.1%
/dev/hda2: |=========================================== - 77.4%
/dev/hda2: |============================================ \ 77.8%
/dev/hda2: |============================================ | 78.2%
/dev/hda2: |============================================ / 78.6%
/dev/hda2: |============================================ - 78.9%
/dev/hda2: |============================================ \ 79.3%
/dev/hda2: |============================================= | 79.5%
/dev/hda2: |============================================= / 79.8%
/dev/hda2: |============================================= - 80.1%
/dev/hda2: |============================================= \ 80.4%
/dev/hda2: |============================================= | 80.8%
/dev/hda2: |============================================= / 81.1%
/dev/hda2: |============================================== - 81.5%
/dev/hda2: |============================================== \ 81.9%
/dev/hda2: |============================================== | 82.2%
/dev/hda2: |============================================== / 82.6%
/dev/hda2: |============================================== - 82.8%
/dev/hda2: |=============================================== \ 83.3%
/dev/hda2: |=============================================== | 83.7%
/dev/hda2: |=============================================== / 84.0%
/dev/hda2: |=============================================== - 84.3%
/dev/hda2: |=============================================== \ 84.6%
/dev/hda2: |================================================ | 85.0%
/dev/hda2: |================================================ / 85.2%
/dev/hda2: |================================================ - 85.5%
/dev/hda2: |================================================ \ 85.8%
/dev/hda2: |================================================ | 86.1%
/dev/hda2: |================================================ / 86.3%
/dev/hda2: |================================================ - 86.5%
/dev/hda2: |================================================= \ 86.7%
/dev/hda2: |================================================= | 87.3%
/dev/hda2: |================================================= / 87.6%
/dev/hda2: |================================================= - 87.7%
/dev/hda2: |================================================= \ 87.9%
/dev/hda2: |================================================= | 88.1%
/dev/hda2: |================================================== / 88.5%
/dev/hda2: |================================================== - 88.7%
/dev/hda2: |================================================== \ 89.1%
/dev/hda2: |================================================== | 89.4%
/dev/hda2: |================================================== / 89.7%
/dev/hda2: |================================================== - 89.9%
/dev/hda2: |================================================== \ 90.0%
/dev/hda2: |================================================== | 90.1%
/dev/hda2: |==================================================== / 93.7%
/dev/hda2: |===================================================== - 95.4%
/dev/hda2: |========================================================| 100.0%
/dev/hda2: ***** REBOOT LINUX *****
/dev/hda2: 10886/103488 files (1.0% non-contiguous), 67592/206836 blocks
fsck died with exit status 3
[31mfailed (code 3).[39;49m
[31m*[39;49m The file system check corrected errors on the root partition
but requested that the system be restarted.
[33m*[39;49m The system will be restarted in 5 seconds.
Restarting system.
.
Cobalt Microserver Diagnostics - 'We serve it, you surf it'
Built Tue May 25 15:58:41 PDT 1999
1.LCD Test................................PASS
2.Controller Test.........................PASS
5.Bank 0:.................................64M
6.Bank 1:.................................64M
7.Bank 2:.................................0M
8.Bank 3:.................................0M
9.Serial Test.............................PASS
10.PCI Expansion Slot....................**EMPTY**
12.IDE Test................................PASS
13.Ethernet Test...........................PASS
16.RTC Test................................PASS
BOOTLOADER ramcode: selected partition /dev/hda1
Decompressing -\|/-\|/-\|/-\| done
Executing bootloader kernel...
Decompressing -/-\ done.
[ "CoLo" v1.22 ]
stage2: 87fa0000-88000000
cpu: clock 250.000MHz
pci: unit type <RaQ2>
tulip: #0 device 21143
tulip: #1 device 21143
tulip: {00:10:e0:00:eb:8d}
ide: resetting
boot: running boot menu
1> lcd 'Booting...'
1> mount
ide: {SAMSUNG WN321620A (2.16 GB)}
ide: LBA 4219488
ide: supports PIO mode 4
ide: mode 4 timing
ide: partition 1
ext2: revision 0
1> lcd 'Booting...' /dev/{mounted-volume}
1> -load /boot/default.colo
ext2: {boot/default.colo} --> {./default.colo}
000000bf 191t
1> -script
2> mount hda1
ext2: revision 0
2> load /vmlinux
ext2: {vmlinux} --> {vmlinux-2.6.17-2-r5k-cobalt}
0033561c 3364380t
2> lcd "Booting Debian"
2> var cons_opts ''
2> -var cons_opts console=ttyS0,{console-speed}
2> execute root=/dev/hda2 {cons_opts}
elf32: 00080000 - 0032301f (802df000) (ffffffff.80000000)
elf32: 80080000 (80080000) 2605190t + 159642t
Linux version 2.6.17-2-r5k-cobalt (Debian 2.6.17-9) ([EMAIL PROTECTED]) (gcc
version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 Wed Sep 13 17:01:10
UTC 2006
CPU revision is: 000028a0
FPU revision is: 000028a0
Cobalt board ID: 6
Cobalt: early console registered
Determined physical RAM map:
memory: 08000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: root=/dev/hda2 console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 1024 (order: 10, 4096 bytes)
Linux version 2.6.17-2-r5k-cobalt (Debian 2.6.17-9) ([EMAIL PROTECTED]) (gcc
version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 Wed Sep 13 17:01:10
UTC 2006
CPU revision is: 000028a0
FPU revision is: 000028a0
Cobalt board ID: 6
Cobalt: early console registered
Determined physical RAM map:
memory: 08000000 @ 00000000 (usable)
Built 1 zonelists
Kernel command line: root=/dev/hda2 console=ttyS0,115200
Primary instruction cache 32kB, physically tagged, 2-way, linesize 32 bytes.
Primary data cache 32kB, 2-way, linesize 32 bytes.
Synthesized TLB refill handler (21 instructions).
Synthesized TLB load handler fastpath (34 instructions).
Synthesized TLB store handler fastpath (34 instructions).
Synthesized TLB modify handler fastpath (33 instructions).
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126592k/131072k available (1985k kernel code, 4348k reserved, 439k
data, 120k init, 0k highmem)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
Checking for 'wait' instruction... available.
NET: Registered protocol family 16
Galileo: fixed bridge class
Galileo: revision 17
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(946684800.156:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Activating ISA DMA hang workarounds.
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.12ac
Cobalt LCD Driver v2.10
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
�serial8250: ttyS0 at I/O 0xc800000 (irq = 21) is a ST16650V2
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Linux Tulip driver version 1.1.13 (December 15, 2004)
PCI: Enabling device 0000:00:07.0 (0045 -> 0047)
tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1.
eth0: Digital DS21143 Tulip rev 65 at b2080000, 00:10:E0:00:EB:8D, IRQ 19.
PCI: Enabling device 0000:00:0c.0 (0005 -> 0007)
tulip1: MII transceiver #1 config 1000 status 7809 advertising 01e1.
eth1: Digital DS21143 Tulip rev 65 at b2080400, 00:10:E0:00:ED:21, IRQ 20.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:09.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586a (rev 27) IDE UDMA33 controller on pci0000:00:09.1
ide0: BM-DMA at 0x1820-0x1827, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0x1828-0x182f, BIOS settings: hdc:pio, hdd:pio
hda: SAMSUNG WN321620A (2.16 GB), ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 4219488 sectors (2160 MB) w/109KiB Cache, CHS=4186/16/63
hda: hda1 hda2 hda3 < hda5 hda6 >
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...usbcore: registered new driver usbfs
usbcore: registered new driver hub
SCSI subsystem initialized
sym0: <860> rev 0x2 at pci 0000:00:08.0 irq 19
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.2.3
USB Universal Host Controller Interface driver v3.0
0:0:0:0: ABORT operation started.
0:0:0:0: ABORT operation timed-out.
0:0:0:0: DEVICE RESET operation started.
0:0:0:0: DEVICE RESET operation timed-out.
0:0:0:0: BUS RESET operation started.
0:0:0:0: BUS RESET operation timed-out.
0:0:0:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:0:0: HOST RESET operation timed-out.
0:0:0:0: scsi: Device offlined - not ready after error recovery
0:0:1:0: ABORT operation started.
0:0:1:0: ABORT operation timed-out.
0:0:1:0: DEVICE RESET operation started.
0:0:1:0: DEVICE RESET operation timed-out.
0:0:1:0: BUS RESET operation started.
0:0:1:0: BUS RESET operation timed-out.
0:0:1:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:1:0: HOST RESET operation timed-out.
0:0:1:0: scsi: Device offlined - not ready after error recovery
0:0:2:0: ABORT operation started.
0:0:2:0: ABORT operation timed-out.
0:0:2:0: DEVICE RESET operation started.
0:0:2:0: DEVICE RESET operation timed-out.
0:0:2:0: BUS RESET operation started.
0:0:2:0: BUS RESET operation timed-out.
0:0:2:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:2:0: HOST RESET operation timed-out.
0:0:2:0: scsi: Device offlined - not ready after error recovery
0:0:3:0: ABORT operation started.
0:0:3:0: ABORT operation timed-out.
0:0:3:0: DEVICE RESET operation started.
0:0:3:0: DEVICE RESET operation timed-out.
0:0:3:0: BUS RESET operation started.
0:0:3:0: BUS RESET operation timed-out.
0:0:3:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:3:0: HOST RESET operation timed-out.
0:0:3:0: scsi: Device offlined - not ready after error recovery
0:0:4:0: ABORT operation started.
0:0:4:0: ABORT operation timed-out.
0:0:4:0: DEVICE RESET operation started.
0:0:4:0: DEVICE RESET operation timed-out.
0:0:4:0: BUS RESET operation started.
0:0:4:0: BUS RESET operation timed-out.
0:0:4:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:4:0: HOST RESET operation timed-out.
0:0:4:0: scsi: Device offlined - not ready after error recovery
0:0:5:0: ABORT operation started.
0:0:5:0: ABORT operation timed-out.
0:0:5:0: DEVICE RESET operation started.
0:0:5:0: DEVICE RESET operation timed-out.
0:0:5:0: BUS RESET operation started.
0:0:5:0: BUS RESET operation timed-out.
0:0:5:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
0:0:5:0: HOST RESET operation timed-out.
0:0:5:0: scsi: Device offlined - not ready after error recovery
0:0:6:0: ABORT operation started.
0:0:6:0: ABORT operation timed-out.
0:0:6:0: DEVICE RESET operation started.
0:0:6:0: DEVICE RESET operation timed-out.
0:0:6:0: BUS RESET operation started.
0:0:6:0: BUS RESET operation timed-out.
0:0:6:0: HOST RESET operation started.
sym0: SCSI BUS has been reset.
done.
Sat, 01 Jan 2000 01:03:15 +0100
Activating swap...Adding 104380k swap on /dev/hda5. Priority:-1 extents:1
across:104380k
done.
Checking root file system...fsck 1.40-WIP (02-Oct-2006)
/dev/hda2: clean, 10886/103488 files, 67592/206836 blocks
done.
EXT3 FS on hda2, internal journal
Setting the system clock again..
0:0:6:0: HOST RESET operation timed-out.
0:0:6:0: scsi: Device offlined - not ready after error recovery
PCI: Enabling device 0000:00:09.2 (0000 -> 0001)
uhci_hcd 0000:00:09.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:09.2 setup!
uhci_hcd 0000:00:09.2: init 0000:00:09.2 fail, -19
Cleaning up ifupdown....
Loading modules...loop: loaded (max 8 devices)
done.
Loading device-mapper supportdevice-mapper: 4.6.0-ioctl (2006-02-17)
initialised: [EMAIL PROTECTED]
.
Checking file systems...fsck 1.40-WIP (02-Oct-2006)
/dev/hda1 has gone 2516 days without being checked, check forced.
/dev/hda1: |==== | 6.4%
/dev/hda1: |======= / 12.7%
/dev/hda1: |=========== - 19.1%
/dev/hda1: |============== \ 25.5%
/dev/hda1: |================== | 31.8%
/dev/hda1: |===================== / 38.2%
/dev/hda1: |========================= - 44.5%
/dev/hda1: |============================= \ 50.9%
/dev/hda1: |================================ | 57.3%
/dev/hda1: |==================================== / 63.6%
/dev/hda1: |======================================= - 70.0%
/dev/hda1: |===================================================== \ 95.2%
/dev/hda1: |======================================================= | 97.5%
/dev/hda1: |========================================================| 100.0%
/dev/hda1: 20/22088 files (0.0% non-contiguous), 6768/88324 blocks
/dev/hda6 has gone 2516 days without being checked, check forced.
/dev/hda6: |==== | 7.8%
/dev/hda6: |========= / 15.6%
/dev/hda6: |============= - 23.3%
/dev/hda6: |================= \ 31.1%
/dev/hda6: |====================== | 38.9%
/dev/hda6: |========================== / 46.7%
/dev/hda6: |============================== - 54.4%
/dev/hda6: |=================================== \ 62.2%
/dev/hda6: |======================================= | 70.0%
/dev/hda6: |===================================================== / 94.0%
/dev/hda6: |===================================================== - 95.3%
/dev/hda6: |======================================================= \ 98.6%
/dev/hda6: |========================================================| 100.0%
/dev/hda6: 15/135648 files (6.7% non-contiguous), 12809/271089 blocks
done.
Setting kernel variables...done.
Mounting local filesystems...kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
done.
Activating swapfile swap...done.
Setting up networking....
Configuring network interfaces...done.
INIT: Entering runlevel: 2
[...]
