Package: installation-reports Boot method: <How did you boot the installer? CD? floppy? network?> Image version: <Full URL to image you downloaded is best> Date: <Date and time of the install>
Machine: HP B2000 Processor: PA-RISC2.0 (I think) Memory: 256MB Partitions: separate for usr, home .... Output of lspci -nn and lspci -vnn: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [O] Configure network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [O] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [E] Install boot loader: [O] Overall install: [E] Comments/Problems: I have used the net-install ISO (4.0). The network is instable, so wget to a known address is often stalled. This I have tested (Alt-F2) because all mirrors are not accessible for the installer. A ping from an other PC to this workstation shows at least 50% lost. Have rebooted, the basic system shows the same problems, ethtool installed using a CD-RW (downloaded from http://www.debian.org/distrib/packages). This tool is not able to get data from eth0. I think the hardware is wrong configured, the switch shows: Port Mode: 100 FD, Flow Control: Disabled IMO on HP-UX it must be configured to use 100 FD. Because ethtool is not able to get the current values of the card I have no idea how to solve this problem. Maybe it will work with a CD-Install, but 22 CD are really to many. Is there any description, which are really necessary for an simple apache server system with XFCE as GUI? BR, Silvio
