Package: installation-reports Boot method: used netinst & installed with default options only Image version: 4.0r1 i386 (from HYPERLINK "http://www.debian.org/releases/stable/debian-installer/"www.debian.org/rele ases/stable/debian-installer/ netinst CD image, i386) Date: 30/8/07 9pm (Australian EST) Machine: Dell Dimension V400 Processor: Pentium II/400Mhz Memory: 64MB SDRAM Partitions: single partition – entire disk partitioned/formatted for Debian Output of lspci -nn and lspci -vnn: ?? Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [0] Configure network: [0] Detect CD: [0] Load installer modules: [0] Detect hard drives: [0] Partition hard drives: [0] Install base system: [0] Clock/timezone setup: [0] User/password setup: [0] Install tasks: [0] Install boot loader: [0] Overall install: [0] Comments/Problems: Install appeared to be successful (no errors) but system won’t complete boot. Appears to boot/load everything but then screen goes blank and stops. At this point can’t seem to type anything to get it to move on. Only option is to press Reset button (reboots system) or On/Off switch. If press On/Off switch, screen temporarily reactivates and can see that system is at login prompt, but can’t type anything. System then shuts down. I am a complete novice with Linux so have no knowledge to diagnose or resolve this problem. Help!
David Wilkins 02 9918 5801 0419 275 642 www.wine.com.au No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.484 / Virus Database: 269.12.12/979 - Release Date: 29/08/2007 8:21 PM
