Hello, I had the same issue. I solved it with the follwing lines in my xorg:
Section "ServerFlags" Option "AllowEmptyInput" "false" EndSection Section "InputDevice" Identifier "Default mouse" Driver "mouse" Option "Device" "/dev/ums0" Option "Protocol" "auto" Option "SendCoreEvents" "true" EndSection It seems to be a bug in hal. Guillermo 2010/1/30 Alan BRASLAU <[email protected]>: > Hello, > > I newly installed kfreebsd-i386, fairly successfully, > using the mini.iso debian installer. However, I have not > been able to get the X11 core pointer (usb mouse) to work: > 1. neither "by default" using hal > 2. nor using a very minimal xorg.conf > > I have seen some discussion in bug reports, > but the little information that I have found on the web seems outdated. > So I suspect that my problem is not so general > and I am just missing something rather simple. > > Please advise. > > Alan > > > > dmesg: > > ums0: <vendor 0x045e product 0x00b9, class 0/0, rev 2.00/0.17, addr 2> on > usbus0 > ums0: 5 buttons and [XYZ] coordinates ID=17 > > lshal: does not show anything mouse-related > > (non-hal variant of /etc/X11/xorg.conf): > > Section "Device" > Identifier "Default mga Device 0" > Driver "mga" > EndSection > > Section "Screen" > Identifier "Default mga Screen 0" > Device "Default mga Device 0" > EndSection > > Section "InputDevice" > Identifier "Default mouse" > Driver "mouse" > Option "Device" "/dev/sysmouse" # See below... "/dev/ums0" > Option "Protocol" "auto" > Option "SendCoreEvents" "true" > EndSection > > Section "ServerLayout" > Identifier "Default Server" > Screen "Default mga Screen 0" > InputDevice "Default mouse" > Option "AllowEmptyInput" "off" > Option "AutoAddDevices" "off" > EndSection > > Yields: /var/log/Xorg.0.log > > (**) Option "Protocol" "auto" > (**) Default mouse: Device: "/dev/sysmouse" > (**) Default mouse: Protocol: "auto" > (**) Option "SendCoreEvents" "true" > (**) Default mouse: always reports core events > (**) Option "Device" "/dev/sysmouse" > (==) Default mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) Default mouse: ZAxisMapping: buttons 4 and 5 > (**) Default mouse: Buttons: 9 > (**) Default mouse: Sensitivity: 1 > (II) XINPUT: Adding extended input device "Default mouse" (type: MOUSE) > (**) Default mouse: (accel) keeping acceleration scheme 1 > (**) Default mouse: (accel) acceleration profile 0 > (II) Default mouse: SetupAuto: hw.iftype is 4, hw.model is 0 > (II) Default mouse: SetupAuto: protocol is SysMouse > (**) Default mouse: Device: "/dev/sysmouse" > (**) Default mouse: Protocol: "auto" > (**) Option "SendCoreEvents" "true" > (**) Option "CorePointer" > (**) Default mouse: always reports core events > (**) Option "Device" "/dev/sysmouse" > (==) Default mouse: Emulate3Buttons, Emulate3Timeout: 50 > (**) Default mouse: ZAxisMapping: buttons 4 and 5 > (**) Default mouse: Buttons: 9 > (**) Default mouse: Sensitivity: 1 > (II) XINPUT: Adding extended input device "Default mouse" (type: MOUSE) > (**) Default mouse: (accel) keeping acceleration scheme 1 > (**) Default mouse: (accel) acceleration profile 0 > (II) Default mouse: SetupAuto: hw.iftype is 4, hw.model is 0 > (II) Default mouse: SetupAuto: protocol is SysMouse > > > Replacing /dev/sysmouse with /dev/ums0 yields: > > (**) Option "Device" "/dev/ums0" > (EE) xf86OpenSerial: Cannot open device /dev/ums0 > Device or resource busy. > (EE) Default mouse: cannot open input device > (EE) PreInit failed for input device "Default mouse" > (II) UnloadModule: "mouse" > > > -- > To UNSUBSCRIBE, email to [email protected] > with a subject of "unsubscribe". Trouble? Contact [email protected] > > -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected]
