Do correct me if I am doing it wrong now but after reading Robert's mail I
uncommented the -Werror... in debian/rules.

When I started building the  package again and it seems that quite a few
files unde sbin/ifconfig/ is missing netinet/ether.h.

sbin/ifconfig/ifbridge.c
sbin/ifconfig/ifieee80211.c
sbin/ifconfig/af_link.c

Also a few in usr.bin and usr.sbin complained and failed to build, but
build with netinet/ether.h.

usr.bin/netstat/if.c
usr.bin/netstat/route.c

usr.sbin/arp/arp.c

Arp is also broken in jessie.
$ arp -a
Segmentation fault

usr.sbin/ppp/tty.c also complains and fails on lines 244.

With these changes though both arp and ifconfig works.

# ./sbin/ifconfig/ifconfig
nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE>
        ether 0:30:5:fa:70:14
        inet6 fe80::230:5ff:fefa:7014%nfe0 prefixlen 64 scopeid 0x3
        inet XXX.XXX.XXX.X netmask 0xffffff00 broadcast XXX.XXX.X.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
pflog0: flags=0<> metric 0 mtu 33152
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
pfsync0: flags=0<> metric 0 mtu 1500
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 64
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
vlan20: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 0:30:5:fa:70:14
        inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255
        inet6 fe80::230:5ff:fefa:7014%vlan20 prefixlen 64 scopeid 0x7
        vlan: 20 parent interface: nfe0
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>

# ./usr.sbin/arp/arp -a
? (XXXXX) at 0:1c:7f:33:ba:4a on nfe0 expires in 1111 seconds [ethernet]
? (XXXXX) at 0:19:6:60:23:40 on nfe0 expires in 1197 seconds [ethernet]
? (XXXXX) at 0:1c:7f:33:ba:4a on nfe0 expires in 1034 seconds [ethernet]
gateway (XXXXX) at 0:1c:7f:33:ba:4a on nfe0 expires in 1111 seconds
[ethernet]
trashcan (XXXXX) at 0:30:5:fa:70:14 on nfe0 permanent [ethernet]

PS: I apologize for spamming Robert personally.


2013/8/1 Robert Millan <r...@debian.org>

> 2013/8/1 Lars Lansink <cry...@cryptr.net>:
> >         # ifconfig
> >         nfe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric
> 0 mtu 1500
> >                 options=82008<VLAN_MTU,WOL_MAGIC,LINKSTATE>
> >         Segmentation fault
>
> Probably my mistake. It might be due to some of the implicit function
> declarations coming back during upgrade.
>
> -Werror=implicit-function-declaration was clearly a good idea for
> freebsd-libs, I'll see if I can enable it on freebsd-utils as well...
>



-- 
Lars (cry...@cryptr.net)
Proud user of Debian GNU/Linux and Debian GNU/kFreeBSD.

Reply via email to