I follow the instructions from handbook:
*ifconfig wlan0 create wlandev ath0
**ifconfig wlan0 inet 192.168.1.1 netmask 255.255.255.0 ssid
WALUBAMEwepmode onwepkey
maximoemelo06
*
**after:
*wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf
*
and i got:
ioctl[SIOCS80211, op=20, val=0, arg_len=7]: Invalid argument
ioctl[SIOCS80211, op=20, val=0, arg_len=7]: Invalid argument
wlan0: Trying to associate with 00:21:27:e2:7b:9a (SSID='WALUBAME'
freq=2437 MHz)
wlan0: Associated with 00:21:27:e2:7b:9a
wlan0: CTRL-EVENT-CONNECTED - Connection to 00:21:27:e2:7b:9a completed
(auth) [id=0 id_str=]
and not connect.
Here is my wpa_supplicant.conf:
*network={
ssid="WALUBAME"
key_mgmt=NONE
wep_key0="maximoemelo06"
}*
**2013/8/10 Robert Millan <[email protected]> > On 10/08/2013 13:42, Steven Chamberlain wrote: > > Hi, > > > > On 10/08/13 07:00, Bruno Melo wrote: > >> Hi, someone can guide me to configure WEP wireless in kFreeBSD (hardware > >> atheros)? > > Have you tried following instructions for regular FreeBSD? > > > > I haven't tried this but, probably something like this should work: > > > > # ifconfig wlan0 create wlandev ath0 > > # ifconfig wlan0 ssid MYNETWORK wepkey 0x1234567890123 up > > # dhclient -v wlan0 > You can also check the FreeBSD handbook, there's an extensive chapter on > wireless setup: > > http://www.freebsd.org/doc/handbook/network-wireless.html > > -- > Robert Millan > >
