found 765070 openrc/0.13.1-1 thanks Hi,
Bug is still present in this version. I've attached a new backtrace from running `rc-update -u`. The bug is reproducible on kfreebsd-amd64 kernel versions 9.2 and 10.1 (jessie/sid), but not on 9.0 (wheezy). I can't think why that might be. libkvm can be ruled out, because I recompiled without it (as it was not being used anyway) and the crash still happens. -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: kfreebsd-amd64 (x86_64) Kernel: kFreeBSD 10.1-0-amd64 Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash
Starting program: /root/openrc-0.13.1/debian/openrc/sbin/rc-update -u * Caching service dependencies ... * Found a solvable dependency loop: checkfs.sh p> checkfs n> mountall.sh p> mountall u> hwclock.sh a> checkroot n> checkfs.sh. Program received signal SIGSEGV, Segmentation fault. 0x00007fffffffdcdd in ?? () (gdb) bt full #0 0x00007fffffffdcdd in ?? () No symbol table info available. #1 0x0000000800a5335b in rc_deptree_solve_loop (unap_matrix=0x7fffffffde60, service_id=4, svc_id2depinfo_bt=0x63d3c0, end_dep_num=26, flags=(RCDTFLAGS_LOOPSOLVER | RCDTFLAGS_LOOPSOLVER_WARNINGS)) at librc-depend.c:1270 btree = 0x65f150 idid_to_break = 0x65f110 idid_count = 1 idid_to_break_count = 8 chain_strs = 0x65f6d0 chains = 0x65eeb0 deptypes = 0x65f680 minimal_cost = UNAPM_USE chains_size = 65 chain_count = 1 printerr = 1 '\001' printwarn = 1 '\001' idid_counters = 0x65f180 idid_count2 = 0 depinfo_from = 0xf00000000 depinfo_to = 0xf00000027 #2 0x0000000800a5528f in __RC_rc_deptree_update ( flags=(RCDTFLAGS_LOOPSOLVER | RCDTFLAGS_LOOPSOLVER_WARNINGS)) at librc-depend.c:1806 dep_num = 26 dep_count = 26 unapm_type = UNAPM_MAX loopsolver_counter = 0 loopfound = 0 unap_matrix = {0x63c4b0, 0x63c6c0, 0x63c8d0, 0x63cae0, 0x63ccf0, 0x63cf00} service_id = 4 svc_id2depinfo_bt = 0x63d3c0 fp = 0x625ee0 deptree = 0x627f60 providers = 0x625ee0 depinfo = 0x0 depinfo_np = 0x80064d5d0 di = 0x633730 deptype = 0x0 dt_np = 0x401bb4 dt = 0x633780 provide = 0x80064c000 config = 0x625d30 types = 0x63b840 sorted = 0x63b920 visited = 0x63c000 s = 0x0 s2 = 0x0 s2_np = 0x0 s3 = 0x0 s4 = 0x0 line = 0x628000 "0\200b" len = 8192 depend = 0x0 depends = 0x0 service = 0x628000 "0\200b" type = 0x628008 "P\217b" nosys = 0x1000004b1 <error: Cannot access memory at address 0x1000004b1> onosys = 0x0 i = 5 k = 34366213566 retval = true sys = 0x0 uts = { sysname = "GNU/kFreeBSD\000\000\000\000\001\000\000\000\377\177\000\000\210Q\204\000\b\000\000", nodename = "debian\000\000Q\246\244\000\b\000\000\000\377\377\377\377\000\000\000\000\340\336\377\377\377\177\000", release = "10.1-0-amd64\000\000\000\000\020\337\377\377\377\177\000\000\000\337\377\377\377\177\000", version = "#0 Sat, 20 Sep 2014 22:02:28 +0100\000\000\000\000\000\000\000\300d\000\b", '\000' <repeats 11 times>, "@\353\377\377\377\177\000\000\000\000\000\000\000\000\000\000P\220\305\000\b", '\000' <repeats 11 times>, "@\353\377\377\377\177", '\000' <repeats 18 times>, "\020\340\377\377\377\177\000\000g\024c\000\b\000\000\000\001\000\000\000\000\000\000\000\310Pb", '\000' <repeats 13 times>, "@\353\377\377\377\177", '\000' <repeats 18 times>, " \345\377\377\377\177\000\000g\024c\000\b\000\000\000\001", '\000' <repeats 15 times>..., machine = "x86_64\000\000\000\000\000\000\000\000\000\000@)\027\001\b\000\000\000\301s\245\000\b\000\000"} useneedafter_count = 64 #3 0x000000000040c60b in _rc_deptree_load (force=-1, regen=0x7fffffffe544) at rc-depend.c:80 fd = -1 retval = 32767 serrno = 0 merrno = 2 t = 0 file = "\000\000\000\000\000\000\000\000\212\267b\000\b\000\000\000\200\342\377\377\377\177\000\000\304\060c\000\b\000\000\000\061\000so.0.1\271\b\346\000\b\000\000\000\001\000\000\000\000\000\000\000\212\267b\000\b\000\000\000\260\342\377\377\377\177\000\000X\236b\000\b\000\000\000\000l.so.2\000o.2\000\b\000\000\000\001\000\000\000\000\000\000\000\350\026<\001\b\000\000\000 \341\377\377\377\177\000\000\000\340;\001\b\000\000\000\070\317d\000\b\000\000\000\030\343\377\377\377\177\000\000\021\035@\000\000\000\000\000`Q\204\000\b\000\000\000\030\000\003\000\003\000\000\000\b\327;\001\b\000\000\000\006\000\000\000\000\000\000\000h\337\377\377\377\177\000\000\351\034@\000\000\000\000\000"... st = {st_dev = 1180, st_ino = 0, st_mode = 36452, __pad_mode = 99, st_nlink = 8, __pad_nlink = 0, st_uid = 77, st_gid = 61552, st_rdev = 37, st_atim = {tv_sec = 47, tv_nsec = 34366219001}, st_mtim = {tv_sec = 0, tv_nsec = 34366345016}, st_ctim = { tv_sec = 37, tv_nsec = 4201745}, st_size = 4294967296, st_blocks = 12, st_blksize = 2880, st_flags = 0, st_gen = 6500548, __unused1 = {140737488347776, 34377017521}} ut = {actime = 140737488348596, modtime = 140737488348000} fp = 0x20 #4 0x00000000004120d2 in rc_update (argc=2, argv=0x7fffffffeb48) at rc-update.c:247 deptree = 0x8013bdc40 <initial> runlevels = 0x1 runlevel = 0x7fffffffeb48 service = 0x0 p = 0x800632480 <_dl_fini> "UH\211\345AWAVAUATSH\203\354\070\307", <incomplete sequence \314> action = 0 verbose = false stack = false all_runlevels = false opt = 117 retval = 1 num_updated = 0 actfunc = 0x7fffffffeda7 ret = 1 #5 0x000000000040c105 in run_applets (argc=2, argv=0x7fffffffeb48) at rc-applets.c:557 i = 6 #6 0x0000000000417dee in main (argc=2, argv=0x7fffffffeb48) at rc.c:789 bootlevel = 0x0 newlevel = 0x0 hotplugged_services = 0x0 stop_services = 0x0 start_services = 0x0 types_n = 0x0 types_nua = 0x0 deptree = 0x0 deporder = 0x0 tmplist = 0x801062d98 service = 0x1000c600000001 going_down = false depoptions = 3 krunlevel = "\005\000\000\000\000\000\000\000\a\000\000\000\000\000\000\000P\325d\000\b\000\000\000\276\315b\000\b\000\000\000\301S\200\030\225\263_\031\240\346\377\377\377\177\000\000`}\006\001\b\000\000\000\310M\a\001\b\000\000\000\260\347\377\377\377\177\000\000\302[\362\001\000\000\000\000\240\347\377\377\377\177\000\000\302\373b\000\b", '\000' <repeats 11 times>, "\210\333d\000\b\000\000\000`\317d\000\b\000\000\000TGb\000\b\000\000\000\000O\a\001\b\000\000\000\020Db\000\b\000\000\000\000\000\000\000\001\000\000\000\257\b\000\000\001\000\000\000\220\373b\000\b\000\000\000\210\333d\000\b\000\000\000@\350\377\377\377\177\000\000\340T\204\000\b\000\000\000\000\351\377\377\377\177\000\000"... pidstr = "\370I\204\000\b\000\000\000\207", <incomplete sequence \360> opt = 8 parallel = 255 regen = 0 nostop = false (gdb)