Your message dated Mon, 25 Jun 2007 19:46:28 +0000 with message-id <[EMAIL PROTECTED]> and subject line Bug#427289: fixed in grub2 1.95+20070614-1 has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what I am talking about this indicates a serious mail system misconfiguration somewhere. Please contact me immediately.) Debian bug tracking system administrator (administrator, Debian Bugs database)
--- Begin Message ---Package: grub-pc Version: 1.95+20070520-1 Severity: important Hello, I installed a new lenny with yesterday daily-built netinst amd64 image and at the end d-i proposed me to install grub2 instead of grub-legacy. The installation was OK and I rebooted into the new lenny to upgrade it to sid: ===== Script started on Sat 02 Jun 2007 01:01:28 AM CEST gismo:~# apt-get dist-upgrade Reading package lists... Done [...] Setting up linux-image-2.6.21-1-amd64 (2.6.21-4) ... Running depmod. Finding valid ramdisk creators. Using mkinitramfs-kpkg to build the ramdisk. Running postinst hook script /usr/sbin/update-grub. grub-probe: error: unknown device User postinst hook script [/usr/sbin/update-grub] exited with value 1 dpkg: error processing linux-image-2.6.21-1-amd64 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of linux-image-2.6-amd64: linux-image-2.6-amd64 depends on linux-image-2.6.21-1-amd64; however: Package linux-image-2.6.21-1-amd64 is not configured yet. dpkg: error processing linux-image-2.6-amd64 (--configure): dependency problems - leaving unconfigured Setting up grub-pc (1.95+20070520-1) ... grub-probe: error: unknown device dpkg: error processing grub-pc (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of grub2: grub2 depends on grub-pc; however: Package grub-pc is not configured yet. dpkg: error processing grub2 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: linux-image-2.6.21-1-amd64 linux-image-2.6-amd64 grub-pc grub2 E: Sub-process /usr/bin/dpkg returned an error code (1) gismo:~# ====== I guess the problem is linked to the fact that I've /dev/sda1, 200M, ext3, /boot /dev/sda2, 90G, encrypted LVM In fact, grub-probe works with /boot, but not with /: ===== gismo:~# grub-probe -v /boot grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda' grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda' grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda2' grub-probe: info: the size of hd0 is 195371568 grub-probe: info: the size of hd0 is 195371568 grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda2' grub-probe: info: changing current directory to /dev/mapper grub-probe: info: changing current directory to /dev grub-probe: info: changing current directory to snd grub-probe: info: changing current directory to net grub-probe: info: changing current directory to loop grub-probe: info: changing current directory to shm grub-probe: info: changing current directory to pts grub-probe: info: changing current directory to vggismo grub-probe: info: changing current directory to mapper grub-probe: info: /dev/sda1 starts from 63 grub-probe: info: opening the device hd0 grub-probe: info: the size of hd0 is 195371568 grub-probe: info: DOS partition 0 starts from 63 grub-probe: info: opening hd0,1 grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' ext2 gismo:~# grub-probe -v / grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda' grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda' grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda2' grub-probe: info: the size of hd0 is 195371568 grub-probe: info: the size of hd0 is 195371568 grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: opening the device `/dev/sda1' grub-probe: info: the size of hd0 is 195371568 grub-probe: info: opening the device `/dev/sda2' grub-probe: info: changing current directory to /dev/mapper grub-probe: info: opening vggismo-lvroot grub-probe: error: unknown device gismo:~# ===== I'm here ready to test any patch, if needed :-) Thx, bye, Gismo / Luca -- Package-specific info: *********************** BEGIN /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec 0 0 none /proc proc rw,nosuid,nodev,noexec 0 0 udev /dev tmpfs rw 0 0 /dev/mapper/vggismo-lvroot / ext3 rw,data=ordered 0 0 /dev/mapper/vggismo-lvroot /dev/.static/dev ext3 rw,data=ordered 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid 0 0 varrun /var/run tmpfs rw,nosuid 0 0 usbfs /proc/bus/usb usbfs rw,nosuid,nodev,noexec 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0 devpts /dev/pts devpts rw,nosuid,noexec 0 0 /dev/sda1 /boot ext3 rw,data=ordered 0 0 /dev/mapper/vggismo-lvhome /home ext3 rw,data=ordered 0 0 /dev/mapper/vggismo-lvchroot /mnt/chroot ext3 rw,data=ordered 0 0 /dev/mapper/vggismo-lvlab /mnt/lab ext3 rw,data=ordered 0 0 /dev/mapper/vggismo-lvmovies /mnt/movies ext3 rw,data=ordered 0 0 /dev/mapper/vggismo-lvmusic /mnt/music ext3 rw,data=ordered 0 0 /dev/mapper/vggismo-lvpictures /mnt/pictures ext3 rw,data=ordered 0 0 *********************** END /proc/mounts *********************** BEGIN /boot/grub/device.map (hd0) /dev/sda *********************** END /boot/grub/device.map *********************** BEGIN /boot/grub/grub.cfg # grub.cfg - See: grub(8), info grub, update-grub(8) # grub-install(8), grub-floppy(8), # grub-md5-crypt, /usr/share/doc/grub # and /usr/share/doc/grub-doc/. ## default num # Set the default entry to the entry number NUM. Numbering starts from 0, and # the entry number 0 is the default if the command is not used. set default=0 ## timeout sec # Set a timeout, in SEC seconds, before automatically booting the default entry # (normally the first entry defined). set timeout=5 # Pretty colours # FIXME: use gfxterm here? # Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST ### BEGIN AUTOMAGIC KERNELS LIST ## lines between the AUTOMAGIC KERNELS LIST markers will be modified ## by the debian update-grub script except for the default options below ## DO NOT UNCOMMENT THEM, Just edit them to your needs ## ## Start Default Options ## ## default kernel options ## default kernel options for automagic boot options ## If you want special options for specific kernels use kopt_x_y_z ## where x.y.z is kernel version. Minor versions can be omitted. ## e.g. kopt=root=/dev/hda1 ro ## kopt_2_6_8=root=/dev/hdc1 ro ## kopt_2_6_8_2_686=root=/dev/hdc2 ro # kopt=root=/dev/mapper/vggismo-lvroot ro vga=792 ## default grub root device ## e.g. groot=(hd0,0) # groot=(hd0,1) ## should update-grub create alternative automagic boot options ## e.g. alternative=true ## alternative=false # alternative=true ## should update-grub lock alternative automagic boot options ## e.g. lockalternative=true ## lockalternative=false # lockalternative=false ## additional options to use with the default boot option, but not with the ## alternatives ## e.g. defoptions=vga=791 resume=/dev/hda5 # defoptions= ## should update-grub lock old automagic boot options ## e.g. lockold=false ## lockold=true # lockold=false ## Xen hypervisor options to use with the default Xen boot option # xenhopt= ## Xen Linux kernel options to use with the default Xen boot option # xenkopt=console=tty0 ## altoption boot targets option ## multiple altoptions lines are allowed ## e.g. altoptions=(extra menu suffix) extra boot options ## altoptions=(single-user) single # altoptions=(single-user mode) single ## controls how many kernels should be put into the grub.cfg ## only counts the first occurence of a kernel, not the ## alternative kernel options ## e.g. howmany=all ## howmany=7 # howmany=all ## should update-grub create memtest86 boot option ## e.g. memtest86=true ## memtest86=false # memtest86=true ## should update-grub adjust the value of the default booted system ## can be true or false # updatedefaultentry=false ## ## End Default Options ## menuentry "Debian GNU/Linux, linux 2.6.18-4-amd64" { set root=(hd0,1) linux /vmlinuz-2.6.18-4-amd64 root=/dev/mapper/vggismo-lvroot ro vga=792 initrd /initrd.img-2.6.18-4-amd64 } menuentry "Debian GNU/Linux, linux 2.6.18-4-amd64 (single-user mode)" { set root=(hd0,1) linux /vmlinuz-2.6.18-4-amd64 root=/dev/mapper/vggismo-lvroot ro vga=792 single initrd /initrd.img-2.6.18-4-amd64 } ### END DEBIAN AUTOMAGIC KERNELS LIST *********************** END /boot/grub/grub.cfg -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.18-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages grub-pc depends on: ii libc6 2.5-9 GNU C Library: Shared libraries ii liblzo2-2 2.02-2 data compression library grub-pc recommends no packages. -- no debconf information
--- End Message ---
--- Begin Message ---Source: grub2 Source-Version: 1.95+20070614-1 We believe that the bug you reported is fixed in the latest version of grub2, which is due to be installed in the Debian FTP archive: grub-efi_1.95+20070614-1_amd64.deb to pool/main/g/grub2/grub-efi_1.95+20070614-1_amd64.deb grub-pc_1.95+20070614-1_amd64.deb to pool/main/g/grub2/grub-pc_1.95+20070614-1_amd64.deb grub-rescue-pc_1.95+20070614-1_amd64.deb to pool/main/g/grub2/grub-rescue-pc_1.95+20070614-1_amd64.deb grub2_1.95+20070614-1.diff.gz to pool/main/g/grub2/grub2_1.95+20070614-1.diff.gz grub2_1.95+20070614-1.dsc to pool/main/g/grub2/grub2_1.95+20070614-1.dsc grub2_1.95+20070614-1_amd64.deb to pool/main/g/grub2/grub2_1.95+20070614-1_amd64.deb grub2_1.95+20070614.orig.tar.gz to pool/main/g/grub2/grub2_1.95+20070614.orig.tar.gz A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to [EMAIL PROTECTED], and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Robert Millan <[EMAIL PROTECTED]> (supplier of updated grub2 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing [EMAIL PROTECTED]) -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Format: 1.7 Date: Thu, 14 Jun 2007 08:17:21 +0200 Source: grub2 Binary: grub-of grub-pc grub-efi grub-rescue-pc grub2 Architecture: source amd64 Version: 1.95+20070614-1 Distribution: unstable Urgency: low Maintainer: GRUB Maintainers <[EMAIL PROTECTED]> Changed-By: Robert Millan <[EMAIL PROTECTED]> Description: grub-efi - GRand Unified Bootloader, version 2 (EFI version) grub-pc - GRand Unified Bootloader, version 2 (PC/BIOS version) grub-rescue-pc - GRUB bootable rescue images, version 2 (PC/BIOS version) grub2 - GRand Unified Bootloader, version 2 (dummy package) Closes: 427289 Changes: grub2 (1.95+20070614-1) unstable; urgency=low . * New CVS snapshot. - update-grub is tollerant to unreadable / (as long as /boot is accessible). (Closes: #427289) * grub-pc.postinst: Generate new grub.cfg when menu.lst exists. * New package grub-rescue-pc. - control: Add it. - README.Debian.in: Remove obsolete documentation. - rules: Build rescue images using grub-mkrescue. - grub-rescue-pc.dirs: Prepare their directory. - grub-rescue-pc.install: Install them. * legacy/update-grub: Fix core.img detection on separate /boot. Files: e662f9e7f98c0a7ca2fbc8a5a5c83b30 1412 admin extra grub2_1.95+20070614-1.dsc 97325d201f41279418f99aa890ddd146 559486 admin extra grub2_1.95+20070614.orig.tar.gz 5c158506e8b194d193d92044a9d00770 26586 admin extra grub2_1.95+20070614-1.diff.gz abc9a6ec58dfc985f1e9078d559edb6c 73112 admin extra grub2_1.95+20070614-1_amd64.deb 5a3d85356d83ab452ee5bfb5528b9caf 923850 admin extra grub-pc_1.95+20070614-1_amd64.deb c9d0fd7a03a04612eeed9e5d367716d6 305086 admin extra grub-rescue-pc_1.95+20070614-1_amd64.deb 0b4289f8eaae6ee06706498e2e32060d 857164 admin extra grub-efi_1.95+20070614-1_amd64.deb -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iD8DBQFGcN84C19io6rUCv8RAkfnAJwJHlccuObW5jba2n6aqozzFTFoXQCfXLwO Ms1zYzmw+kVhNYNDEB7tIrk= =vWTC -----END PGP SIGNATURE-----
--- End Message ---
