--- Begin Message ---
Package: lirc
Version: N/A
Severity: normal
Tags: patch
Dear Debian maintainer,
On Thursday, September 06, 2007, I notified you of the beginning of a review
process
concerning debconf templates for lirc.
The debian-l10n-english contributors have now reviewed these templates,
and the proposed changes are attached to this bug report.
Please review the suggested changes are suggested, and if you have any
objections, let me know in the next 3 days.
Please try to avoid uploading lirc with these changes right now.
The second phase of this process will begin on Sunday, September 23, 2007, when
I will
coordinate updates to translations of debconf templates.
The existing translators will be notified of the changes: they will
receive an updated PO file for their language.
Simultaneously, a general call for new translations will be sent to
the debian-i18n mailing list.
Both these calls for translations will request updates to be sent as
individual bug reports. That will probably trigger a lot of bug
reports against your package, but these should be easier to deal with.
The call for translation updates and new translations will run until
about Sunday, October 14, 2007. Please avoid uploading a package with fixed or
changed
debconf templates and/or translation updates in the meantime. Of
course, other changes are safe.
Please note that this is an approximative delay, which depends on my
own availability to process this work and is influenced by the fact
that I simultaneously work on many packages.
Around <DAY25>, I will contact you again and will send a final patch
summarizing all the updates (changes to debconf templates,
updates to debconf translations and new debconf translations).
Again, thanks for your attention and cooperation.
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-2-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
--- lirc.old/debian/lirc-modules-source.templates 2007-09-05
06:09:02.867100598 +0200
+++ lirc/debian/lirc-modules-source.templates 2007-09-20 07:06:07.353127800
+0200
@@ -1,3 +1,12 @@
+# These templates have been reviewed by the debian-l10n-english
+# team
+#
+# If modifications/additions/rewording are needed, please ask
+# [EMAIL PROTECTED] for advice.
+#
+# Even minor modifications require translation updates and such
+# changes should be coordinated with translators and reviewers.
+
Template: lirc-modules-source/drivers
Type: multiselect
Choices: atiusb, bt829, cmdir, gpio, i2c, igorplugusb, imon, it87, mceusb,
mceusb2, parallel, sasem, serial, sir, streamzap
@@ -10,7 +19,7 @@
i2c: TV cards from Hauppauge and PixelView
igorplugusb: Igor Cesko's USB IR Receiver
imon: Soundgraph iMON MultiMedian IR/VFD
- it87: ITE IT8705/12 CIR ports (e.g. on the ECS K7S5A or Asus
DigiMatrix)
+ it87: ITE IT8705/12 CIR ports (ECS K7S5A, Asus DigiMatrix...)
mceusb: Windows Media Center Remotes (old version, MicroSoft USB ID)
mceusb2: Windows Media Center Remotes (new version, Philips et al.)
parallel: Home-brew parallel-port receiver
@@ -22,23 +31,27 @@
Template: lirc-modules-source/use_lirc_hints
Type: boolean
Default: true
-_Description: Try to automagically select support for your hardware?
- You have installed and configured LIRC. It is possible to guess what kernel
- modules are needed and their parameters from your previous answers.
+_Description: Try to automatically select hardware support options?
+ Your previous answers can be used as a basis for guessing the list of
+ kernel modules that should be built, along with their parameters.
+ .
+ Please choose whether this should happen.
Template: lirc-modules-source/not_needed
Type: note
-_Description: You don't need any additional kernel modules
- Unless you want to build LIRC kernel modules for some other system, you
- can probably remove this package.
+_Description: Additional kernel modules not needed
+ Unless you want to build LIRC kernel modules for another system,
+ this package is useless on this system.
Template: lirc-modules-source/what_next
Type: note
-_Description: How to build the binary modules package
- For instructions on how to build the binary modules debian package read:
- /usr/share/doc/lirc-modules-source/README.Debian
+#flag:translate!:4
+_Description: Binary modules package build instructions
+ For instructions on how to build the binary modules package, please
+ read the /usr/share/doc/lirc-modules-source/README.Debian file.
.
Quick walkthrough:
+ .
cd /usr/src/
tar -xzf lirc-modules.tar.gz
cd modules/lirc
@@ -47,34 +60,31 @@
Template: lirc-modules-source/it87_type
Type: select
-_Choices: Standard, DigiMatrix
+#flag:translate:1
+__Choices: Standard, DigiMatrix
Default: Standard
_Description: Type of ITE8705/12 CIR port to support:
- The following list includes short descriptions of the different options
- available:
+ Please choose the supported ITE8705/12 CIR port chip:
.
- Standard: Standard setup chip
- DigiMatrix: Setup for Asus DigiMatrix onboard chip
+ Standard: Standard setup chip;
+ DigiMatrix: Setup for Asus DigiMatrix onboard chip.
Template: lirc-modules-source/serial_type
Type: select
-_Choices: ANIMAX, IRDEO, Other
+#flag:translate:3
+__Choices: ANIMAX, IRDEO, Other
Default: Other
-_Description: Type of serial device to support
- The following list includes short descriptions of the different options
- available:
+_Description: Serial device to support:
+ Please choose the supported serial device type:
.
- ANIMAX: Anir Multimedia Magic
- IRDEO: IRdeo
+ ANIMAX: Anir Multimedia Magic;
+ IRDEO: IRdeo;
Other: Any other supported device.
-
- If you don't know what the other devices are, you should probably choose
- "Other".
Template: lirc-modules-source/serial_transmitter
Type: boolean
Default: true
-_Description: Is your serial IR device a transmitter?
+_Description: Is the serial IR device a transmitter?
Template: lirc-modules-source/serial_softcarrier
Type: boolean
@@ -84,66 +94,67 @@
Template: lirc-modules-source/serial_port
Type: string
Default: 0x2f8
-_Description: IO port of your IR serial device:
+_Description: IR serial device I/O port:
Template: lirc-modules-source/serial_irq
Type: string
Default: 3
-_Description: IRQ of your IR serial device:
+_Description: IR serial device IRQ:
Template: lirc-modules-source/sir_type
Type: select
-_Choices: ACTISYS_ACT200L, TEKRAM, Other
+#flag:translate:3
+__Choices: ACTISYS_ACT200L, TEKRAM, Other
Default: Other
-_Description: What type of SIR device should be supported?
- The following lists are short descriptions of the options to show what
- they mean.
+_Description: Type of supported SIR device:
+ Please choose the supported SIR device type:
.
- ACTISYS_ACT200L: Actisys Act200L dongle.
- TEKRAM: Tekram Irmate 210 (16x50 UART compatible serial port)
+ ACTISYS_ACT200L: Actisys Act200L dongle;
+ TEKRAM: Tekram Irmate 210 (16x50 UART compatible serial port);
Other: Any other supported device.
Template: lirc-modules-source/sir_port
Type: string
Default: 0x2f8
-_Description: IO port of your SIR device:
+_Description: SIR device I/O port:
Template: lirc-modules-source/sir_irq
Type: string
Default: 3
-_Description: IRQ of your SIR device:
+_Description: SIR device IRQ:
Template: lirc-modules-source/parallel_port
Type: string
Default: 0x378
-_Description: IO port of your parallel IR device:
+_Description: Parallel IR device I/O port:
Template: lirc-modules-source/parallel_irq
Type: string
Default: 7
-_Description: IRQ of your parallel IR device:
+_Description: Parallel IR device IRQ:
Template: lirc-modules-source/parallel_timer
Type: string
Default: 65536
-_Description: Timer used for your parallel IR device:
+_Description: Parallel IR device timer:
Template: lirc-modules-source/do-build
Type: boolean
Default: false
-_Description: Try to automatically build the modules?
- It is possible to build and install your lirc kernel modules, as long as your
- current kernel's source (and gcc) are present on your computer.
+_Description: Automatically build the modules?
+ New LIRC kernel modules can be built and installed if the source and
+ build environment for the current kernel are present locally.
.
- Even if you choose to dos so, you should build and install a binary 'kernel
+ Even if you choose this option, you should build and install a binary 'kernel
modules' package so that the package manager can keep track of the files.
Template: lirc-modules-source/kernel-source
Type: string
Default: /usr/src/linux/
-_Description: Where is your kernel source?
- To build lirc kernel modules, kernel sources are needed.
+_Description: Kernel source location:
+ Please enter the location of the kernel source tree, to build the
+ lirc kernel modules.
Template: lirc-modules-source/kernel-source-not-found
-Type: note
-_Description: ${ksrc} is not a valid kernel source tree
+Type: error
+_Description: ${ksrc}: invalid kernel source tree
--- lirc.old/debian/lirc.templates 2007-09-05 06:09:02.867100598 +0200
+++ lirc/debian/lirc.templates 2007-09-20 07:06:07.853101798 +0200
@@ -1,95 +1,95 @@
+# These templates have been reviewed by the debian-l10n-english
+# team
+#
+# If modifications/additions/rewording are needed, please ask
+# [EMAIL PROTECTED] for advice.
+#
+# Even minor modifications require translation updates and such
+# changes should be coordinated with translators and reviewers.
+
Template: lirc/install_devices
Type: boolean
Default: true
_Description: Create LIRC device nodes if they are not there?
- LIRC needs some files under /dev/ for it to work:
+ LIRC needs the /dev/lirc, /dev/lircd and /dev/lircm files in /dev.
.
- /dev/lirc /dev/lircd and /dev/lircm
+
Template: lirc/reconfigure
Type: boolean
Default: false
_Description: Do you want to reconfigure LIRC?
- LIRC is already configured, reconfiguring it may spoil some of your
- handcrafted configuration in /etc/lirc/hardware.conf.
+ LIRC is already configured, reconfiguring it may overwrite the
+ existing configuration in /etc/lirc/hardware.conf.
.
- However comments, LIRC_ARGS and other unknown code will be preserved.
+ However, comments, LIRC_ARGS and other unknown code will be preserved.
Template: lirc/take_care_of_old_config
Type: note
-_Description: You should take care of old configuration files
- Previous versions of this package didn't include any configuration file
- and expected the user to put his own /etc/lircd.conf and /etc/lircmd.conf
+_Description: Old configuration files found
+ Previous versions of this package didn't include any configuration
+ file and expected users to create their own /etc/lircd.conf and
+ /etc/lircmd.conf.
.
The new location for these files is /etc/lirc/.
.
- Things will be arranged properly but, in case they can't be, please make
- sure that none of LIRC configuration files are left directly under /etc/.
+ File locations will be corrected but you should check that none of
+ LIRC configuration files are left directly under /etc/.
Template: lirc/driver
Type: string
Description: Driver name for lircd:
- You should not see this template as it is used internally by the
- maintainer scripts, please report this as a bug.
+ for internal use only
Template: lirc/modules
Type: string
Description: Needed kernel modules for LIRC to work:
- You should not see this template as it is used internally by the
- maintainer scripts, please report this as a bug.
+ for internal use only
Template: lirc/device
Type: string
Description: Device node for lircd:
- You should not see this template as it is used internally by the
- maintainer scripts, please report this as a bug.
+ for internal use only
Template: lirc/lircd_conf
Type: string
Description: Recommended configuration file for lircd:
- You should not see this template as it is used internally by the
- maintainer scripts, please report this as a bug.
+ for internal use only
Template: lirc/lircmd_conf
Type: string
Description: Recommended configuration file for lircmd:
- You should not see this template as it is used internally by the
- maintainer scripts, please report this as a bug.
+ for internal use only
Template: lirc/port
Type: string
Description: Hint for lirc-modules-source:
- You should not see this template as it is used internally by the
- maintainer scripts, please report this as a bug.
+ for internal use only
Template: lirc/irq
Type: string
Description: Hint for lirc-modules-source:
- You should not see this template as it is used internally by the
- maintainer scripts, please report this as a bug.
+ for internal use only
Template: lirc/timer
Type: string
Description: Hint for lirc-modules-source:
- You should not see this template as it is used internally by the
- maintainer scripts, please report this as a bug.
+ for internal use only
Template: lirc/cflags
Type: string
Description: Hint for lirc-modules-source:
- You should not see this template as it is used internally by the
- maintainer scripts, please report this as a bug.
+ for internal use only
Template: lirc/should-use-IntelliMouse
Type: note
-_Description: lircmd should use the IntelliMouse protocol instead of IMPS/2
- The method lircmd uses to simulate a mouse is not compatible with IMPS/2
- protocol, so the IntelliMouse support has been added and is now the
- preferred protocol.
- .
- You ARE currently using lircmd with IMPS/2 protocol and are encouraged to
- update /etc/lirc/lircmd.conf and the configuration of any program which
- uses lircmd as a mouse to use IntelliMouse protocol.
+_Description: IntelliMouse protocol preferred over IMPS/2
+ You are currently using lircmd with the IMPS/2 protocol. This is not
+ compatible with the method lircmd uses to simulate a mouse, so IntelliMouse
+ support has been added and is now the preferred protocol.
+ .
+ You should update /etc/lirc/lircmd.conf and the configuration of any program
+ which uses lircmd as a mouse to use the IntelliMouse protocol instead.
.
NOTE: gpm will refuse to use lircmd as a mouse with IMPS/2 protocol.
@@ -97,8 +97,5 @@
Type: boolean
Default: true
_Description: Delete /var/log/lircd?
- LIRC now uses syslog as a logging mechanism. This means that
- /var/log/lircd is not anymore pertinent.
- .
- If you answer 'no' to this question /var/log/lircd will be left there and
- you will have to take care of it yourself.
+ LIRC now uses syslog as a logging mechanism, so /var/log/lircd is no longer
+ relevant.
--- lirc.old/debian/control 2007-09-05 06:09:02.867100598 +0200
+++ lirc/debian/control 2007-09-17 22:00:49.155135558 +0200
@@ -30,7 +30,9 @@
Suggests: lirc-modules-source,
lirc-x,
lirc-svga
-Description: Linux Infra-red Remote Control support
+Description: infra-red remote control support
+ LIRC stands for 'Linux Infra-red Remote Control'.
+ .
This package provides the daemons and some utilities to support infra-red
remote controls under Linux.
@@ -41,21 +43,13 @@
lirc (= ${binary:Version})
Replaces: lirc (<< 0.6.4-8)
Recommends: xfonts-75dpi
-Description: Linux Infra-red Remote Control support (X dependent parts)
- This package provides those parts of lirc which depend on the XWindow system.
- .
- Currently:
- .
- irxevent: Allows you to control your X applications with your remote control.
+Description: infra-red remote control support - X utilities
+ LIRC stands for 'Linux Infra-red Remote Control'.
.
- xmode2: shows the IR waveform of the remote controller without an expensive
- oscilloscope (through an X window). This is not needed for TV cards or the
- Irman.
- .
- You ***MUST*** <--- (really!) have the xfonts-75dpi package available on the
- X server, whether via files or via a font server like xfs. The lirc-x package
- only Recommends: these packages because it's possible to have them served
- remotely, but you really should install them. :)
+ This package provides X utilities for LIRC:
+ irxevent: allows controlling X applications with a remote control;
+ xmode2 : shows the IR waveform of the remote controller without an
+ oscilloscope. Unneeded for TV cards or the Irman.
Package: lirc-svga
Architecture: amd64 i386
@@ -63,13 +57,12 @@
${misc:Depends},
lirc (= ${binary:Version})
Replaces: lirc (<< 0.6.4-8)
-Description: Linux Infra-red Remote Control support (svgalib dependent parts)
- This package provides those parts of lirc which depend on svgalib .
- .
- Currently:
+Description: infra-red remote control support - SVGAlib utilities
+ LIRC stands for 'Linux Infra-red Remote Control'.
.
- smode2: shows the IR waveform of the remote controller without an expensive
- oscilloscope (through svgalib). This is not needed for TV cards or the Irman.
+ This package provides SVGAlib utilities for LIRC:
+ smode2: shows the IR waveform of the remote controller without an
+ oscilloscope. Unneeded for TV cards or the Irman.
Package: lirc-modules-source
Architecture: all
@@ -83,12 +76,13 @@
kernel-package
Suggests: kernel-source
Conflicts: lirc (<<0.6.3-1)
-Description: Linux Infra-red Remote Control support (kernel modules)
+Description: infra-red remote control support - kernel modules
+ LIRC stands for 'Linux Infra-red Remote Control'.
+ .
This package provides the source for the kernel modules to support
infra-red remote controls under Linux.
.
- Please note that the kernel sources must be installed to compile these
- modules.
+ The kernel sources must be installed to compile these modules.
Package: liblircclient-dev
Architecture: any
@@ -96,11 +90,11 @@
Depends: ${misc:Depends},
liblircclient0 (= ${binary:Version}),
libc6-dev
-Description: development files for LIRC client library
+Description: infra-red remote control support - client library development
files
+ LIRC stands for 'Linux Infra-red Remote Control'.
+ .
This package contains the static library and headers for
the LIRC client library.
- .
- LIRC is Linux Infra-red Remote Control support.
Package: liblircclient0
Priority: optional
@@ -109,6 +103,9 @@
Depends: ${shlibs:Depends},
${misc:Depends}
Suggests: lirc
-Description: LIRC client library
- This library provides functions so that other programs (eg xawtv)
- can support remote controls via LIRC.
+Description: infra-red remote control support - client library
+ LIRC stands for 'Linux Infra-red Remote Control'.
+ .
+ This package provides a library with functions to support remote
+ controls via LIRC in programs such as xawtv.
+
--- End Message ---
--- Begin Message ---
Source: lirc
Source-Version: 0.8.0-13
We believe that the bug you reported is fixed in the latest version of
lirc, which is due to be installed in the Debian FTP archive:
liblircclient-dev_0.8.0-13_amd64.deb
to pool/main/l/lirc/liblircclient-dev_0.8.0-13_amd64.deb
liblircclient0_0.8.0-13_amd64.deb
to pool/main/l/lirc/liblircclient0_0.8.0-13_amd64.deb
lirc-modules-source_0.8.0-13_all.deb
to pool/main/l/lirc/lirc-modules-source_0.8.0-13_all.deb
lirc-svga_0.8.0-13_amd64.deb
to pool/main/l/lirc/lirc-svga_0.8.0-13_amd64.deb
lirc-x_0.8.0-13_amd64.deb
to pool/main/l/lirc/lirc-x_0.8.0-13_amd64.deb
lirc_0.8.0-13.diff.gz
to pool/main/l/lirc/lirc_0.8.0-13.diff.gz
lirc_0.8.0-13.dsc
to pool/main/l/lirc/lirc_0.8.0-13.dsc
lirc_0.8.0-13_amd64.deb
to pool/main/l/lirc/lirc_0.8.0-13_amd64.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [EMAIL PROTECTED],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Sven Mueller <[EMAIL PROTECTED]> (supplier of updated lirc package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [EMAIL PROTECTED])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.7
Date: Wed, 3 Oct 2007 15:04:58 +0200
Source: lirc
Binary: liblircclient-dev liblircclient0 lirc-svga lirc lirc-modules-source
lirc-x
Architecture: source all amd64
Version: 0.8.0-13
Distribution: unstable
Urgency: low
Maintainer: [EMAIL PROTECTED]
Changed-By: Sven Mueller <[EMAIL PROTECTED]>
Description:
liblircclient-dev - infra-red remote control support - client library
development fil
liblircclient0 - infra-red remote control support - client library
lirc - infra-red remote control support
lirc-modules-source - infra-red remote control support - kernel modules
lirc-svga - infra-red remote control support - SVGAlib utilities
lirc-x - infra-red remote control support - X utilities
Closes: 184245 443270 444091 444436 444752
Changes:
lirc (0.8.0-13) unstable; urgency=low
.
[ Loic Minier ]
* Update 14_no_linux_config_h patch to also drop <linux/config.h> include
from lirc_atiusb/lirc_atiusb.c, lirc_bt829/lirc_bt829.c,
lirc_cmdir/lirc_cmdir.c, lirc_igorplugusb/lirc_igorplugusb.c,
lirc_imon/lirc_imon.c, lirc_it87/lirc_it87.c, lirc_mceusb/lirc_mceusb.c,
lirc_mceusb2/lirc_mceusb2.c, lirc_parallel/lirc_parallel.c,
lirc_sasem/lirc_sasem.c, lirc_serial/lirc_serial.c, lirc_sir/lirc_sir.c,
lirc_streamzap/lirc_streamzap.c; thanks Florent Rougon; see #400494 and
#436166.
.
[ Sven Mueller ]
* add patch to replace SLAB_ATOMIC usage with the more current equivalent
GFP_ATOMIC.
* incorporate update to debconf templates, thanks to Christian Perrier and
the english l10n team. (Closes: #443270)
* Update german translation
* Add option to start irexec in daemon mode from /etc/init.d/lirc (Closes:
#184245)
* Add myself to the Uploaders field
* Update galician (Closes: #444752), vietnamese (Closes: #444436) and
japanese (Closes: #444091) debconf translations.
Files:
aec6f086aff33ed70b2efe0ecf93463a 1138 utils extra lirc_0.8.0-13.dsc
c457c12e7f9e9c2ce5263948af08e07f 112107 utils extra lirc_0.8.0-13.diff.gz
c1413566a12359bc5f3bd0efc5730609 223118 utils extra
lirc-modules-source_0.8.0-13_all.deb
e0db8b5178417d9052100a77bb92349b 344610 utils extra lirc_0.8.0-13_amd64.deb
671e0d759b24ab10d2f7eb6749687eea 16216 utils extra lirc-x_0.8.0-13_amd64.deb
9e65b13cc689183e2fd188da4ef539e1 5876 utils extra lirc-svga_0.8.0-13_amd64.deb
edf48af81d349be693ced3515df6e6f9 61338 libdevel extra
liblircclient-dev_0.8.0-13_amd64.deb
67b03df40961d331e28bacd7e21bc045 58636 libs optional
liblircclient0_0.8.0-13_amd64.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.6 (GNU/Linux)
iD8DBQFHA7m0Dcs5RBTUBgsRAt9oAJ4vkWLbkM7gv19iy+e0WEGayV8bFgCdFNiw
oKuaE/g4mA8Yamn74LPQR8s=
=BL9w
-----END PGP SIGNATURE-----
--- End Message ---
