Your message dated Mon, 1 Jun 2009 00:57:53 +0200
with message-id <[email protected]>
and subject line Re: Bug#479381: linux-image-2.6.25-1-686: Booting pauses for 
about 30 seconds on Acer Aspire 5710Z
has caused the Debian Bug report #479381,
regarding linux-image-2.6.25-1-686: Booting pauses for about 30 seconds on Acer 
Aspire 5710Z
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
479381: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=479381
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-image-2.6.25-1-686
Version: 2.6.25-1
Severity: normal

Since version 2.6.24 booting the Debian kernel is quite slow because it
pauses for about 30 seconds. It always happens after those lines in the
booting process:

[    9.990058] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[    9.990091] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

Since the interval is "heartbeat=30 sec" and also the pause is always
about 30 seconds long, there might be a connection. The problem happens
on an Acer Aspire 5710Z laptop.

Sebastian

-- Package-specific info:
** Version:
Linux version 2.6.25-1-686 (Debian 2.6.25-1) ([email protected]) (gcc version 
4.1.3 20080420 (prerelease) (Debian 4.1.2-22)) #1 SMP Mon Apr 28 13:54:58 UTC 
2008

** Command line:
root=/dev/sda5 ro quiet 

** Not tainted

** Kernel log:
[    8.027540] ACPI: WMI: Mapper loaded
[    8.099282] input: Power Button (FF) as /class/input/input2
[    8.285803] acer-wmi: Acer Laptop ACPI-WMI Extras version 0.1
[    8.145506] ACPI: Power Button (FF) [PWRF]
[    8.145576] input: Lid Switch as /class/input/input3
[    8.177615] ACPI: Lid Switch [LID]
[    8.177683] input: Sleep Button (CM) as /class/input/input4
[    8.241504] ACPI: Sleep Button (CM) [SLPB]
[    8.241580] input: Power Button (CM) as /class/input/input5
[    8.305592] ACPI: Power Button (CM) [PWRB]
[    8.324898] ACPI: AC Adapter [ACAD] (on-line)
[    8.337447] ACPI: device:03 is registered as cooling_device2
[    8.484265] input: Video Bus as /class/input/input6
[    8.535663] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    8.565224] ACPI: device:07 is registered as cooling_device3
[    8.565372] input: Video Bus as /class/input/input7
[    8.615159] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.859224] ACPI: Battery Slot [BAT1] (battery present)
[    8.798578] intel_rng: FWH not detected
[    9.146404] input: PC Speaker as /class/input/input8
[    9.198700] Real Time Clock Driver v1.12ac
[    9.294007] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> 
IRQ 19
[    9.339410] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[    9.341907] sdhci: Secure Digital Host Controller Interface driver
[    9.341910] sdhci: Copyright(c) Pierre Ossman
[    9.341941] sdhci: SDHCI controller found at 0000:06:00.1 [1524:0750] (rev 0)
[    9.341961] PCI: Enabling device 0000:06:00.1 (0000 -> 0002)
[    9.341970] ACPI: PCI Interrupt 0000:06:00.1[A] -> GSI 20 (level, low) -> 
IRQ 20
[    9.342007] PCI: Setting latency timer of device 0000:06:00.1 to 64
[    9.342065] mmc0: SDHCI at 0xd0200400 irq 20 DMA
[    9.342077] sdhci: SDHCI controller found at 0000:06:00.3 [1524:0751] (rev 0)
[    9.342094] PCI: Enabling device 0000:06:00.3 (0000 -> 0002)
[    9.342101] ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 20 (level, low) -> 
IRQ 20
[    9.342114] sdhc1:slot0: Will use DMA mode even though HW doesn't fully 
claim to support it.
[    9.342122] PCI: Setting latency timer of device 0000:06:00.3 to 64
[    9.342151] mmc1: SDHCI at 0xd0200100 irq 20 DMA
[    9.477742] b43-phy0: Broadcom 4311 WLAN found
[    9.545960] phy0: Selected rate control algorithm 'pid'
[    9.539405] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
[    9.541948] udev: renamed network interface wmaster0 to eth1
[    9.632791] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> 
IRQ 22
[    9.632824] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[    9.864404] input: PS/2 Mouse as /class/input/input9
[    9.929540] input: AlpsPS/2 ALPS GlidePoint as /class/input/input10
[    9.990058] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[    9.990091] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   41.260551] Adding 1004020k swap on /dev/sda6.  Priority:-1 extents:1 
across:1004020k
[   41.747905] EXT3 FS on sda5, internal journal
[   42.306225] loop: module loaded
[   42.563179] fuse init (API version 7.9)
[   48.165224] warning: `named' uses 32-bit capabilities (legacy support in use)
[   48.398454] NET: Registered protocol family 10
[   48.399064] lo: Disabled Privacy Extensions
[   48.399589] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   48.965280] lp: driver loaded but no devices found
[   49.156939] ppdev: user-space parallel port driver
[   53.065655] Bluetooth: Core ver 2.11
[   53.067120] NET: Registered protocol family 31
[   53.067126] Bluetooth: HCI device and connection manager initialized
[   53.067131] Bluetooth: HCI socket layer initialized
[   53.430853] Bluetooth: L2CAP ver 2.9
[   53.430865] Bluetooth: L2CAP socket layer initialized
[   53.163425] Bluetooth: RFCOMM socket layer initialized
[   53.163448] Bluetooth: RFCOMM TTY layer initialized
[   53.163453] Bluetooth: RFCOMM ver 1.8
[   53.388785] input: b43-phy0 as /class/input/input11
[   53.844929] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[   55.697763] Registered led device: b43-phy0::tx
[   55.697791] Registered led device: b43-phy0::rx
[   55.697815] Registered led device: b43-phy0::radio
[   55.752358] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready
[   55.413717] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete 
Error }
[   55.413717] hda: task_no_data_intr: error=0x04 { AbortedCommand }
[   55.413717] ide: failed opcode was: 0xef
[   58.916339] [drm] Initialized drm 1.1.0 20060810
[   58.919673] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> 
IRQ 16
[   58.919684] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   58.919759] [drm] Initialized i915 1.6.0 20060119 on minor 0

** Loaded modules:
Module                  Size  Used by
aes_i586                8256  1 
aes_generic            29160  1 aes_i586
i915                   27648  2 
drm                    72280  3 i915
rfkill_input            4768  0 
rfcomm                 36336  0 
l2cap                  22784  5 rfcomm
bluetooth              52900  4 rfcomm,l2cap
ppdev                   8676  0 
parport_pc             25860  0 
lp                     11012  0 
parport                33868  3 ppdev,parport_pc,lp
ipv6                  241988  22 
acpi_cpufreq            9228  2 
cpufreq_ondemand        8428  1 
cpufreq_powersave       1856  0 
cpufreq_conservative     7432  0 
cpufreq_stats           5216  0 
freq_table              4512  3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
cpufreq_userspace       3812  0 
fuse                   44348  1 
loop                   16708  0 
joydev                 11328  0 
snd_hda_intel         310008  1 
snd_pcm_oss            37824  0 
arc4                    2016  2 
snd_pcm                68228  2 snd_hda_intel,snd_pcm_oss
ecb                     3552  2 
crypto_blkcipher       18116  1 ecb
snd_mixer_oss          14880  1 snd_pcm_oss
snd_seq_dummy           3780  0 
b43                   132060  0 
snd_seq_oss            28544  0 
snd_seq_midi            8064  0 
rfkill                  7252  3 rfkill_input,b43
snd_rawmidi            22528  1 snd_seq_midi
mac80211              121964  1 b43
snd_seq_midi_event      6976  2 snd_seq_oss,snd_seq_midi
sdhci                  16428  0 
iTCO_wdt               11204  0 
snd_seq                45872  6 
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
psmouse                35920  0 
i2c_i801                9520  0 
cfg80211               17800  1 mac80211
mmc_core               43740  1 sdhci
i2c_core               22548  1 i2c_i801
rtc                    14272  0 
pcspkr                  3136  0 
serio_raw               6532  0 
snd_timer              21320  2 snd_pcm,snd_seq
snd_seq_device          7564  5 
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
input_polldev           4968  1 b43
rng_core                4900  1 b43
snd                    48772  11 
snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
battery                 8448  0 
soundcore               7488  1 snd
video                  19728  0 
output                  3712  1 video
ac                      4448  0 
snd_page_alloc          9992  2 snd_hda_intel,snd_pcm
acer_wmi               10548  0 
button                  8240  0 
wmi                     7880  1 acer_wmi
intel_agp              25084  1 
agpgart                31720  3 drm,intel_agp
led_class               5284  2 b43,acer_wmi
evdev                  11328  9 
ext3                  120264  1 
jbd                    43444  1 ext3
mbcache                 8260  1 ext3
ide_cd_mod             32864  0 
cdrom                  31872  1 ide_cd_mod
ata_generic             8004  0 
usbhid                 40192  0 
hid                    36032  1 usbhid
ff_memless              5384  1 usbhid
sd_mod                 26072  3 
piix                    7176  0 [permanent]
ahci                   27336  2 
ide_pci_generic         4228  0 [permanent]
libata                142032  2 ata_generic,ahci
scsi_mod              138508  2 sd_mod,libata
ide_core              100312  3 ide_cd_mod,piix,ide_pci_generic
dock                   10448  1 libata
ehci_hcd               32620  0 
ssb                    30820  1 b43
pcmcia                 36044  2 b43,ssb
pcmcia_core            36436  2 b43,pcmcia
firmware_class          9088  2 b43,pcmcia
uhci_hcd               22352  0 
usbcore               129936  4 usbhid,ehci_hcd,uhci_hcd
tg3                    88804  0 
thermal                19100  0 
processor              39660  4 acpi_cpufreq,thermal
fan                     5636  0 

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML 
and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel
        Kernel modules: intel-agp

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS, 
943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03) (prog-if 
00 [VGA controller])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at d0300000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at 5088 [size=8]
        Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
        Region 3: Memory at d0400000 (32-bit, non-prefetchable) [size=256K]
        Capabilities: <access denied>
        Kernel modules: intelfb

00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 
943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at d0380000 (32-bit, non-prefetchable) [size=512K]
        Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High 
Definition Audio Controller [8086:27d8] (rev 02)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at d0440000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 3 [8086:27d4] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Memory behind bridge: d0000000-d00fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express 
Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        Memory behind bridge: d0100000-d01fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at 50a0 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 50c0 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 50e0 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI 
Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 16
        Region 4: I/O ports at 5400 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI 
Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at d0644000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
        Memory behind bridge: d0200000-d02fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface 
Bridge [8086:27b9] (rev 02)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel modules: iTCO_wdt, intel-rng

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE 
Controller [8086:27df] (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 5090 [size=16]
        Kernel driver in use: PIIX_IDE
        Kernel modules: piix

00:1f.2 SATA controller [0106]: Intel Corporation 82801GBM/GHM (ICH7 Family) 
SATA AHCI Controller [8086:27c5] (rev 02) (prog-if 01 [AHCI 1.0])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 220
        Region 0: I/O ports at 5478 [size=8]
        Region 1: I/O ports at 5470 [size=4]
        Region 2: I/O ports at 5468 [size=8]
        Region 3: I/O ports at 545c [size=4]
        Region 4: I/O ports at 5440 [size=16]
        Region 5: Memory at d0644400 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ahci
        Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller 
[8086:27da] (rev 02)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 5420 [size=32]
        Kernel driver in use: i801_smbus
        Kernel modules: i2c-i801

04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M 
Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR+ <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 219
        Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
        Expansion ROM at <ignored> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: tg3
        Kernel modules: tg3

05:00.0 Network controller [0280]: Broadcom Corporation BCM94311MCG wlan 
mini-PCI [14e4:4311] (rev 01)
        Subsystem: AMBIT Microsystem Corp. Unknown device [1468:0422]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: b43-pci-bridge
        Kernel modules: ssb

06:00.0 FLASH memory [0501]: ENE Technology Inc ENE PCI Memory Stick Card 
Reader Controller [1524:0730]
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (250ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=128]
        Capabilities: <access denied>

06:00.1 SD Host controller [0805]: ENE Technology Inc ENE PCI SmartMedia / xD 
Card Reader Controller [1524:0750] (prog-if 01)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (8000ns min, 18000ns max)
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at d0200400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: sdhci
        Kernel modules: sdhci

06:00.2 FLASH memory [0501]: ENE Technology Inc Unknown device [1524:0720]
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 10
        Region 0: Memory at d0200800 (32-bit, non-prefetchable) [disabled] 
[size=128]
        Capabilities: <access denied>

06:00.3 FLASH memory [0501]: ENE Technology Inc ENE PCI Secure Digital / MMC 
Card Reader Controller [1524:0751]
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:012e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (8000ns min, 18000ns max)
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at d0200100 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: sdhci
        Kernel modules: sdhci



-- System Information:
Debian Release: lenny/sid
  APT prefers testing
  APT policy: (500, 'testing')
Architecture: i386 (i686)

Kernel: Linux 2.6.25-1-686 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.25-1-686 depends on:
ii  debconf [debconf-2.0]         1.5.21     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.92a      tools for generating an initramfs
ii  module-init-tools             3.4-1      tools for managing Linux kernel mo

Versions of packages linux-image-2.6.25-1-686 recommends:
ii  libc6-i686                    2.7-10     GNU C Library: Shared libraries [i

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.25-1-686/postinst/kimage-is-a-directory:
  linux-image-2.6.25-1-686/preinst/abort-install-2.6.25-1-686:
  linux-image-2.6.25-1-686/preinst/failed-to-move-modules-2.6.25-1-686:
  linux-image-2.6.25-1-686/postinst/old-dir-initrd-link-2.6.25-1-686: true
  linux-image-2.6.25-1-686/postinst/create-kimage-link-2.6.25-1-686: true
  linux-image-2.6.25-1-686/postinst/bootloader-test-error-2.6.25-1-686:
  linux-image-2.6.25-1-686/preinst/overwriting-modules-2.6.25-1-686: true
  linux-image-2.6.25-1-686/preinst/initrd-2.6.25-1-686:
  linux-image-2.6.25-1-686/postinst/old-initrd-link-2.6.25-1-686: true
  linux-image-2.6.25-1-686/postinst/depmod-error-2.6.25-1-686: false
  linux-image-2.6.25-1-686/preinst/lilo-has-ramdisk:
  linux-image-2.6.25-1-686/prerm/removing-running-kernel-2.6.25-1-686: true
  linux-image-2.6.25-1-686/postinst/bootloader-error-2.6.25-1-686:
  linux-image-2.6.25-1-686/postinst/depmod-error-initrd-2.6.25-1-686: false
  linux-image-2.6.25-1-686/preinst/abort-overwrite-2.6.25-1-686:
  linux-image-2.6.25-1-686/preinst/lilo-initrd-2.6.25-1-686: true
  linux-image-2.6.25-1-686/preinst/bootloader-initrd-2.6.25-1-686: true
  linux-image-2.6.25-1-686/preinst/elilo-initrd-2.6.25-1-686: true
  linux-image-2.6.25-1-686/prerm/would-invalidate-boot-loader-2.6.25-1-686: true
  linux-image-2.6.25-1-686/postinst/old-system-map-link-2.6.25-1-686: true



--- End Message ---
--- Begin Message ---
Duplicate, check the other bug for progress (do not expect any, this
happens for an upgrade corner case).

-- 
ciao,
Marco

Attachment: signature.asc
Description: Digital signature


--- End Message ---

Reply via email to