--- Begin Message ---
Package: clamav
Version: N/A
Severity: normal
Tags: patch
Dear Debian maintainer,
On Thursday, March 26, 2009, I notified you of the beginning of a review process
concerning debconf templates for clamav.
The debian-l10n-english contributors have now reviewed these templates,
and the proposed changes are attached to this bug report.
Please review the suggested changes, and if you have any
objections, let me know in the next 3 days.
However, please try to avoid uploading clamav with these changes
right now.
The second phase of this process will begin on Tuesday, April 14, 2009, when I
will
coordinate updates to translations of debconf templates.
The existing translators will be notified of the changes: they will
receive an updated PO file for their language.
Simultaneously, a general call for new translations will be sent to
the debian-i18n mailing list.
Both these calls for translations will request updates to be sent as
individual bug reports. That will probably trigger a lot of bug
reports against your package, but these should be easier to deal with.
The call for translation updates and new translations will run until
about Tuesday, May 05, 2009. Please avoid uploading a package with fixed or
changed
debconf templates and/or translation updates in the meantime. Of
course, other changes are safe.
Please note that this is an approximative delay, which depends on my
own availability to process this work and is influenced by the fact
that I simultaneously work on many packages.
Around Wednesday, May 06, 2009, I will contact you again and will send a final
patch
summarizing all the updates (changes to debconf templates,
updates to debconf translations and new debconf translations).
Again, thanks for your attention and cooperation.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.28-1-686 (SMP w/1 CPU core)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
--- clamav.old/debian/clamav-milter.templates 2009-03-26 19:12:49.816449140
+0100
+++ clamav/debian/clamav-milter.templates 2009-04-11 09:03:18.482051647
+0200
@@ -1,26 +1,33 @@
+# These templates have been reviewed by the debian-l10n-english
+# team
+#
+# If modifications/additions/rewording are needed, please ask
+# [email protected] for advice.
+#
+# Even minor modifications require translation updates and such
+# changes should be coordinated with translators and reviewers.
+
Template: clamav-milter/debconf
Type: boolean
Default: true
_Description: Handle the configuration file automatically?
Some options must be configured for clamav-milter.
.
- The ClamAV suite won't work if it isn't configured. If you do not
+ It won't work if it isn't configured. If you do not
configure it automatically, you'll have to configure
- /etc/clamav/clamav-milter.conf manually or run 'dpkg-reconfigure
clamav-milter'
+ /etc/clamav/clamav-milter.conf manually or run "dpkg-reconfigure
clamav-milter"
later. In any case, manual changes in /etc/clamav/clamav-milter.conf will
be respected.
Template: clamav-milter/MilterSocket
Type: string
Default: /var/run/clamav/milter.ctl
-_Description: Define the interface through to communicate with sendmail:
- Possible formats are:
- .
- Unix domain socket: [[unix|local]:]/path/to/file
- .
- IPv4 socket: inet:p...@[hostname|ip-address]
- .
- IPv6 socket: inet6:p...@[hostname|ip-address]
+_Description: Communication interface with Sendmail:
+ Please choose the method that should be used by clamav-milter to
+ communicate with Sendmail. The following formats can be used:
+ - Unix domain socket: [[unix|local]:]/path/to/file
+ - IPv4 socket : inet:p...@[hostname|ip-address]
+ - IPv6 socket : inet6:p...@[hostname|ip-address]
Template: clamav-milter/FixStaleSocket
Type: boolean
@@ -32,142 +39,168 @@
Default: clamav
_Description: User to run clamav-milter as:
It is recommended to run the ClamAV programs as a non-privileged user.
- This will work with most MTAs with a little tweaking, but if you want to
- use clamd for filesystem scans, running as root is probably unavoidable.
+ This will work with most MTAs with a little tweaking.
+ .
Please see README.Debian in the clamav-base package for details.
Template: clamav-milter/AddGroups
Type: string
_Description: Groups for clamav-milter (space-separated):
By default, clamav-milter runs as a non-privileged user. If you need
- clamav-milter to be able to access files owned by another user (e.g., in
- combination with an MTA), then you will need to add clamav to the group for
- that piece of software. Please see README.Debian in the clamav-base package
for
+ clamav-milter to be able to access files owned by another user (for
+ instance when it is used in combination with an MTA), this user
+ need to be added to the relevant group(s).
+ .
+ Please see README.Debian in the clamav-base package for
details.
Template: clamav-milter/ReadTimeout
Type: string
Default: 120
-_Description: Waiting for data from clamd will timeout after this time
(seconds):
- Set to a value of '0' to disable the timeout.
+_Description: Wait timeout for data coming from clamd:
+ Please enter the delay (in seconds) before clamav-milter times out when it is
+ waiting for incoming data from clamd.
+ .
+ Choosing "0" will disable this timeout.
Template: clamav-milter/Foreground
Type: boolean
Default: false
-_Description: Stay in foreground (don't fork)?
+_Description: Should clamav-milter stay in foreground (not forking)?
Template: clamav-milter/Chroot
Type: string
_Description: Chroot to directory:
- Chrooting is performed just after reading the config file and before dropping
- privileges. An empty value means don't chroot.
+ Clamav-milter can run in a chroot jail. It will enter it after reading
+ the configuration file and before dropping root privileges.
+ .
+ If this field is left empty, no chrooting will occur.
Template: clamav-milter/PidFile
Type: string
Default: /var/run/clamav/clamav-milter.pid
_Description: PID file:
- This option allows you to save a process identifier of the listening daemon
- (main thread).
+ Please specify the process identifier file location for clamav-milter's
+ listening daemon (main thread).
Template: clamav-milter/TemporaryDirectory
Type: string
Default: /tmp
-_Description: Optional path to the global temporary directory:
- If unset, $TMPDIR and $TEMP will be honored.
+_Description: Global temporary directory path:
+ Please specify the directory for clamav-milter's temporary files.
+ If unset, $TMPDIR and $TEMP will be honored.
Template: clamav-milter/ClamdSocket
Type: string
Default: unix:/var/run/clamav/clamd.ctl
-_Description: Define the clamd socket to connect to for scanning:
- To refer to a local unix socket using a absolute path, use unix:path (e.g.,
- unix:/var/run/clamd/clamd.socket). A local or remote TCP socket is specified
- using the tcp:host:port syntax. The host can be a hostname or an ip address;
- the ":port" field is only required for IPv6 addresses, otherwise it defaults
to
- 3310 (e.g., tcp:192.168.0.1).
- .
- This option can be repeated several times (separated by whitespace) with
- different sockets or even with the same socket: clamd servers will be selected
- in a round-robin fashion.
+_Description: Clamd socket to connect to for scanning:
+ Please specify the socket to use to connect to the ClamAV daemon for
+ scanning purposes. Possible choices are:
+ - a local unix socket using an absolute path, in "unix:path" format
+ (for example: unix:/var/run/clamd/clamd.socket);
+ - a local or remote TCP socket in "tcp:host:port" format (for example:
+ tcp:192.168.0.1). The "host" value can be either a hostname or an IP
+ address, and the "port" is only required for IPv6 addresses,
+ defaulting to 3310 otherwise.
+ .
+ You may specify multiple choices, separated by spaces. In such cases, the
+ clamd servers will be selected in a round-robin fashion.
Template: clamav-milter/LocalNet
Type: string
-_Description: Exclusions - IP ranges:
- Messages originating from these hosts/networks will not be scanned. This
- option takes a host(name)/mask pair in CIRD notation and can be repeated
- several times (separated by whitespace). If "/mask" is omitted, a host is
- assumed. To specify a locally originated, non-smtp, email use the keyword
- "local".
+_Description: Hosts excluded from scanning:
+ Please specify, in CIDR notation (host(name)/mask), the hosts for
+ which no scanning should be performed on incoming mail. Multiple entries
+ should be separated by spaces. The "local" shortcut can be used to
+ specify locally-originated (non-SMTP) email.
.
- If unset, everything regardless of the origin is scanned.
+ If this field is left empty, all incoming mail will be scanned.
Template: clamav-milter/Whitelist
Type: string
-_Description: Exclusions - Regular expressions:
- This option specifies a file which contains a list of POSIX regular
- expressions. Addresses (sent to or from) matching these regexes will not be
- scanned. Optionally each line can start with the string "From:" or "To:"
- (note: no whitespace after the colon) indicating if it is, respectively, the
- sender or recipient that is to be whitelisted. If the field is missing, "To:"
- is assumed.
- .
- Lines in this file starting with #, : or ! are ignored.
+_Description: Mail addresses whitelist:
+ Please specify the path to a whitelist file, listing email addresses
+ that should cause scanning to be bypassed.
+ .
+ Each line in this file should be a POSIX regular expression; lines
+ starting with "#", ":" or "!" will be ignored as comments.
+ .
+ Lines may start with "From:" (with no space after the colon) to make
+ the whitelisting apply to matching sender addresses; otherwise, or
+ with a "To:" prefix, it affects recipient addresses.
Template: clamav-milter/OnClean
Type: select
-Choices: Accept, Reject, Defer, Blackhole, Quarantine
+__Choices: Accept, Reject, Defer, Blackhole, Quarantine
Default: Accept
-_Description: Action to be performed on clean messages (mostly useful for
testing):
- The following actions are available:
- .
- - Accept: The message is accepted for delievery
- .
- - Reject: Immediately refuse delievery (a 5xx error is returned to the peer)
+_Description: Action to perform on clean messages:
+ Please choose the action to perform on "clean" messages:
.
- - Defer: Return a temporary failure message (4xx) to the peer
+ - Accept : accept the message for delivery;
+ - Reject : immediately refuse delivery (with a 5xx error);
+ - Defer : return a temporary failure message (4xx);
+ - Blackhole : accept the message then drop it;
+ - Quarantine: accept the message then quarantine it. With
+ Sendmail, the quarantine queue can be examined
+ with "mailq -qQ". With Postfix, such mails are placed
+ on hold.
.
- - Blackhole (not available for OnFail): Like accept but the message is sent to
- oblivion
- .
- - Quarantine (not available for OnFail): Like accept but message is
quarantined
- instead of being delivered In sendmail the quarantine queue can be examined
- via mailq -qQ For Postfix this causes the message to be accepted but placed
- on hold
+ This setting is meant for testing purposes only.
Template: clamav-milter/OnInfected
Type: select
-Choices: Accept, Reject, Defer, Blackhole, Quarantine
+__Choices: Accept, Reject, Defer, Blackhole, Quarantine
Default: Quarantine
-_Description: Action to be performed on infected messages:
+_Description: Action to perform on infected messages:
+ Please choose the action to perform on "infected" messages:
+ .
+ - Accept : accept the message for delivery;
+ - Reject : immediately refuse delivery (with a 5xx error);
+ - Defer : return a temporary failure message (4xx);
+ - Blackhole : accept the message then drop it;
+ - Quarantine: accept the message then quarantine it. With
+ Sendmail, the quarantine queue can be examined
+ with "mailq -qQ". With Postfix, such mails are placed
+ on hold.
Template: clamav-milter/OnFail
Type: select
-Choices: Accept, Reject, Defer, Blackhole, Quarantine
+__Choices: Accept, Reject, Defer
Default: Defer
-_Description: Action to be performed on error conditions:
- This includes failure to allocate data structures, no scanners available,
- network timeouts, unknown scanner replies and the like)
+_Description: Action to perform on error conditions:
+ Please choose the action to perform on errors such as failure to
+ allocate data structures, no scanners available,
+ network timeouts, unknown scanner replies...:
+ .
+ - Accept: accept the message for delivery;
+ - Reject: immediately refuse delivery (with a 5xx error);
+ - Defer : return a temporary failure message (4xx).
Template: clamav-milter/RejectMsg
Type: string
_Description: Specific rejection reason for infected messages:
- It is only useful together with "OnInfected Reject". The string "%v", if
- present, will be replaced with the virus name.
+ Please specify the rejection reason that will be included in reject mails.
+ .
+ This option is only useful together with "OnInfected Reject".
+ .
+ The "%v" string may be used to include the virus name.
Template: clamav-milter/AddHeader
Type: boolean
Default: false
_Description: Add headers to processed messages?
- If adding headers is enabled, "X-Virus-Scanned" and "X-Virus-Status" headers
+ If you choose this option, "X-Virus-Scanned" and "X-Virus-Status" headers
will be attached to each processed message, possibly replacing existing
- headers.
+ similar headers.
Template: clamav-milter/LogFile
Type: string
Default: none
-_Description: Log to file:
- LogFile must be writable for the user running daemon. A full path is
required.
+_Description: Log file for clamav-milter:
+ Specify the full path to the clamav-milter log file, which must be
+ writable for the clamav daemon.
.
- Logging via syslog is configured independently of this entry.
+ Logging via syslog is configured independently of this setting.
Template: clamav-milter/LogFileUnlock
Type: boolean
@@ -179,8 +212,9 @@
Template: clamav-milter/LogFileMaxSize
Type: string
Default: 1M
-_Description: Maximum size of the log file (unit Mb):
- Set to a value of '0' to disable the timeout.
+_Description: Maximum size of the log file (MB):
+ Please specify the maximum size for the log file. Using "0" will
+ allow that file to grow indefinitely.
Template: clamav-milter/LogTime
Type: boolean
@@ -190,13 +224,16 @@
Template: clamav-milter/LogSyslog
Type: boolean
Default: false
-_Description: Use system logger (can work together with LogFile)?
+_Description: Use system logger?
+ Please choose whether you want to use the system logger (syslog). This
+ option can be used along with logging in a dedicated file.
Template: clamav-milter/LogFacility
Type: string
Default: LOG_LOCAL6
-_Description: Specify the type of syslog messages:
- Please refer to 'man syslog' for facility names.
+_Description: Type of syslog messages:
+ Please choose the type of syslog messages as detailed in the system
+ logger's documentation.
Template: clamav-milter/LogVerbose
Type: boolean
@@ -205,15 +242,21 @@
Template: clamav-milter/LogInfected
Type: select
-Choices: Off, Basic, Full
+__Choices: Off, Basic, Full
Default: Off
-_Description: What should be logged when a message is infected:
- Possible values are Off (the default - nothing is logged), Basic (minimal info
- logged), Full (verbose info logged)
+_Description: Information to log on infected messages:
+ Please choose the level of information that will be logged when infected
+ messages are found:
+ - Off : no logging;
+ - Basic: minimal information;
+ - Full : verbose information.
Template: clamav-milter/MaxFileSize
Type: string
Default: 25M
-_Description: Messages larger than this value won't be scanned (unit Mb):
- Make sure this value is lower than StreamMaxLength in clamd.conf
-
+_Description: Size limit for scanned messages (MB):
+ Please specify the maximum size for scanned messages. Messages bigger than
+ this limit will not be scanned.
+ .
+ You should check that this value is lower than the value of "StreamMaxLength"
+ in the clamd.conf file.
--- clamav.old/debian/control 2009-03-26 19:12:49.816449140 +0100
+++ clamav/debian/control 1970-01-01 01:00:00.000000000 +0100
@@ -1,90 +0,0 @@
-Source: clamav
-Section: misc
-Priority: optional
-Maintainer: Bernd Zeimetz <[email protected]>
-Build-Depends: debhelper (>= 5.0.61), po-debconf, dpkg-dev (>= 1.14.8),
- quilt, autotools-dev,
- python-all-dev, python-support (>= 0.4),
- xsltproc, docbook-xsl, docbook-xml,
- libxt-dev, lesstif2-dev, libxaw7-dev, libncurses-dev,
- libdbus-1-dev, libglib2.0-dev, libdbus-glib-1-dev, makedev
-Standards-Version: 3.8.0
-Homepage: http://gpsd.berlios.de/
-XS-Python-Version: all
-
-Package: clamav
-Architecture: any
-Depends: python, netbase, lsb-base (>= 3.0-6), ${shlibs:Depends},
${misc:Depends}
-Recommends: gpsd-clients
-Suggests: udev
-Description: GPS (Global Positioning System) daemon
- gpsd is a service daemon that monitors one or more GPSes attached to a host
- computer through serial or USB ports, making all data on the location/course/
- velocity of the sensors available to be queried on TCP port 2947 of the host
- computer.
- .
- With gpsd, multiple GPS client applications can share access to GPSes without
- contention or loss of data. Also, gpsd responds to queries with a format that
- is substantially easier to parse than the NMEA 0183 emitted by most GPSes.
-
-Package: gpsd-clients
-Architecture: any
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Suggests: python-gps, gpsd
-Description: Clients for the GPS daemon
- gpsd is a service daemon that monitors one or more GPSes attached to a host
- computer through serial or USB ports, making all data on the location/course/
- velocity of the sensors available to be queried on TCP port 2947 of the host
- computer.
- .
- This package contains auxiliary tools and example clients for monitoring and
- testing gpsd.
-
-Package: python-gps
-Architecture: any
-Section: python
-Replaces: gpsd-clients (<< 2.34.dfsg-1)
-Depends: ${shlibs:Depends}, ${misc:Depends}, ${python:Depends}
-Recommends: gpsd
-Provides: ${python:Provides}
-Description: Python interface to gpsd and testing environment
- gpsd is a service daemon that monitors one or more GPSes attached to a host
- computer through serial or USB ports, making all data on the location/course/
- velocity of the sensors available to be queried on TCP port 2947 of the host
- computer.
- .
- This package contains a Python interface to conntect to gpsd, together with
- a module providing a controlled testing environment. It also ships two tools
- which utilize the interface: gpsprof for latency-profiling and gpsfake to
- simulate a GPS by playing back a logfile.
-
-Package: libgps17
-Architecture: any
-Section: libs
-Depends: ${shlibs:Depends}, ${misc:Depends}
-Description: C library for communicating with GPS devices
- libgps is a service library for querying GPS devices. There are two
- interfaces supported by it:
- * A high-level interface that goes through gpsd, a service daemon that
- monitors one or more GPS devices. It is intended for concurrent use by
- several applications.
- * A low-level interface that speaks directly with the serial or USB
- device to which the GPS is attached.
-
-Package: libgps-dev
-Architecture: any
-Section: libdevel
-Depends: libgps17 (= ${binary:Version}), ${misc:Depends}
-Conflicts: gpsd (<< 2.34.dfsg-1)
-Description: C library for communicating with GPS devices (development files)
- libgps is a service library for querying GPS devices. There are two
- interfaces supported by it:
- * A high-level interface that goes through gpsd, a service daemon that
- monitors one or more GPS devices. It is intended for concurrent use by
- several applications.
- * A low-level interface that speaks directly with the serial or USB
- device to which the GPS is attached.
- .
- This package contains the header and development files needed to build
- programs and packages using libgps.
-
--- End Message ---
