Your message dated Tue, 04 Aug 2009 23:17:37 +0100
with message-id <[email protected]>
and subject line gspca has been removed from Debian, closing #489244
has caused the Debian Bug report #489244,
regarding [gspca] video capture hangs when usb mouse moves
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
489244: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=489244
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: gspca
Version: 1.00.20-1
Severity: important
--- Please enter the report below this line. ---
i have compiled from sources this gspca module (smoothly) and it works very
nice... except when i move the usb mouse it hangs the video capture.
(moving the mouse's pointer with synaptics pad does not hang the capture !)
i used to have this issue in the past i remmeber it waas solved too.
so i guess it is back ?
name of gspca module:
/usr/src/gspca-modules-2.6.25-trunk-686_01.00.20-1+2.6.25-1~experimental.1~snapshot.11165_i386.deb
i use a tiny microsoft(tm) usb mouse:
045e:007d Microsoft Corp. Notebook Optical Mouse
lsusb:
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 007: ID 0458:7004 KYE Systems Corp. (Mouse Systems) VideoCAM
Express
Bus 001 Device 006: ID 045e:007d Microsoft Corp. Notebook Optical Mouse
Bus 001 Device 004: ID 05e3:0604 Genesys Logic, Inc. USB 1.1 Hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
here is dmesg when i plugin the webcam:
usb 1-1.3: USB disconnect, address 5
[69637.174424] usb 1-1.3: new full speed USB device using ohci_hcd and address
7
[69637.273048] usb 1-1.3: configuration #1 chosen from 1 choice
[69637.277176] /usr/src/modules/gspca/gspca_core.c: USB GSPCA camera found.
(SPCA561A)
[69637.277190] /usr/src/modules/gspca/gspca_core.c: [spca5xx_probe:4275]
Camera type S561
[69637.292465] /usr/src/modules/gspca/gspca_core.c:
[spca5xx_getcapability:1249] maxw 352 maxh 288 minw 160 minh 120
[69637.292554] usb 1-1.3: New USB device found, idVendor=0458, idProduct=7004
[69637.292558] usb 1-1.3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0
[69637.403000] /usr/src/modules/gspca/Sunplus/spca561.h: [spca561_init:463]
Find spca561 USB Product ID 7004
[69637.909572] /usr/src/modules/gspca/gspca_core.c:
[spca5xx_set_light_freq:1932] Sensor currently not support light frequency
banding filters.
[69637.909589] /usr/src/modules/gspca/gspca_core.c: [gspca_set_isoc_ep:945]
ISO EndPoint found 0x81 AlternateSet 7
and here is what i get when i move the mouse:
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [0] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [1] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [2] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [3] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [4] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [5] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [6] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [7] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [8] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [9] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [10] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [11] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [12] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [13] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [14] len=0, status=-18
[69543.110708]
[69543.110708] /usr/src/modules/gspca/gspca_core.c: [spca50x_move_data:1611]
ISOC data error: [15] len=0, status=-18
--- System information. ---
Architecture: i386
Kernel: Linux 2.6.25-trunk-686
Debian Release: lenny/sid
500 unstable www.debian-multimedia.org
500 unstable mirror.isoc.org.il
500 testing mirror.isoc.org.il
500 kernel-dists-trunk kernel-archive.buildserver.net
500 experimental www.debian-multimedia.org
1 experimental mirror.isoc.org.il
--- Package information. ---
Depends (Version) | Installed
=======================-+-===========
|
--- End Message ---
--- Begin Message ---
Version: 01.00.20-1+rm
The gspca package has been removed from Debian so we are closing
the bugs that were still opened against it.
For more information about this package's removal, read
http://bugs.debian.org/519463 . That bug might give the reasons why
this package was removed, and suggestions of possible replacements.
Don't hesitate to reply to this mail if you have any question.
Thank you for your contribution to Debian.
Kind regards,
--
Marco Rodrigues
--- End Message ---
