Your message dated Fri, 19 Feb 2010 05:32:22 +0000
with message-id <[email protected]>
and subject line Bug#567776: fixed in scponly 4.8-4.1
has caused the Debian Bug report #567776,
regarding scponly: [INTL:fr] French debconf templates translation update
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
567776: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=567776
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: scponly
Version: N/A
Severity: wishlist
Tags: patch l10n
Please find attached the french debconf templates update, proofread by the
debian-l10n-french mailing list contributors.
If you do not already use it, you might consider using the
"podebconf-report-po" utility, which helps warning translators about
changes when you modify some debconf templates in your packages.
The usual policy when using it is sending a warning to translators
when you plan to upload a version of your package with debconf
templates changes (even typo corrections). Then leave about one week
for them to update their files (several translation teams have a QA
process which requires time).
podebconf-report-po will take care of sending the translators the
needed material as well as getting the translators adresses from the
PO files. All you have to do is just using the utility..:-)
Example use (from your package build tree):
$ podebconf-report-po
This will go through debian/po/*.po files, find those needing an
update, extract the translators data from these files and prepare a
mail to send to these translators (you can also use the
"--languageteam" switch to also mail the mail addresses listed in
"Language-Team" field).
You can also use this utility to request for new translations:
$ podebconf-report-po --call
This will send a mail to [email protected] with all the
needed information and material for new translators to add new
languages to your supported languages.
If you apply this policy, please forget about these remarks, of
course....This message is generic..:-)
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-trunk-686 (SMP w/2 CPU cores)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
#
# Translators, if you are not familiar with the PO format, gettext
# documentation is worth reading, especially sections dedicated to
# this format, e.g. by running:
# info -n '(gettext)PO Files'
# info -n '(gettext)Header Entry'
# Some information specific to po-debconf are available at
# /usr/share/doc/po-debconf/README-trans
# or http://www.debian.org/intl/l10n/po-debconf/README-trans#
# Developers do not need to manually edit POT or PO files.
#
# Christian Perrier <[email protected]>, 2010.
msgid ""
msgstr ""
"Project-Id-Version: scponly_4.8-1\n"
"Report-Msgid-Bugs-To: [email protected]\n"
"POT-Creation-Date: 2009-07-10 13:16+0000\n"
"PO-Revision-Date: 2010-01-31 12:43+0100\n"
"Last-Translator: Christian Perrier <[email protected]>\n"
"Language-Team: French <[email protected]>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Lokalize 1.0\n"
"Plural-Forms: nplurals=2; plural=(n > 1);\n"
#. Type: boolean
#. Description
#: ../scponly.templates:1001 ../scponly-full.templates:1001
msgid "Install the chrooted binary /usr/sbin/scponlyc SUID root?"
msgstr "Installer /usr/sbin/scponlyc pour un environnement fermé d'exécution ?"
#. Type: boolean
#. Description
#: ../scponly.templates:1001 ../scponly-full.templates:1001
msgid ""
"If you want scponly to chroot into the user's home directory prior to doing "
"its work, the scponly binary has to be installed in /usr/sbin/scponlyc and "
"has to have the suid-root-bit set."
msgstr ""
"Si vous souhaitez que scponly s'exécute dans un environnement restreint au "
"répertoire racine de l'utilisateur avant d'exécuter son travail, le binaire "
"scponly doit être installé dans /usr/bin/scponlyc et doit avoir le bit suid "
"positionné (autorisations d'accès en 4755, exécution avec les droits du "
"super-utilisateur)."
#. Type: boolean
#. Description
#: ../scponly.templates:1001 ../scponly-full.templates:1001
msgid ""
"This could lead (in the worst case) to a remotely exploitable root hole. If "
"you don't need the chroot- functionality, don't install the file."
msgstr ""
"Cela pourrait entraîner (dans le pire des cas) un accès privilégié "
"exploitable à distance. Si vous n'avez pas besoin que le programme s'exécute "
"dans un environnement fermé (fonctionnalité « chroot »), vous ne devriez pas "
"installer le fichier."
#. Type: note
#. Description
#: ../scponly-full.templates:2001
msgid "Potential security hazard"
msgstr "Possible problème de sécurité"
#. Type: note
#. Description
#: ../scponly-full.templates:2001
msgid ""
"WARNING: this package was compiled with rsync, unison and SVN support, which "
"can be a potential SECURITY hazard if not configured correctly! Please read "
"the file /usr/share/doc/scponly-full/SECURITY!"
msgstr ""
"Ce paquet a été compilé avec la gestion de rsync, unison et SVN, ce qui peut "
"constituer un risque pour la sécurité du système si cela n'est pas configuré "
"correctement. Veuillez consulter le fichier /usr/share/doc/scponly-full/"
"SECURITY pour plus d'informations."
--- End Message ---
--- Begin Message ---
Source: scponly
Source-Version: 4.8-4.1
We believe that the bug you reported is fixed in the latest version of
scponly, which is due to be installed in the Debian FTP archive:
scponly-full_4.8-4.1_i386.deb
to main/s/scponly/scponly-full_4.8-4.1_i386.deb
scponly_4.8-4.1.diff.gz
to main/s/scponly/scponly_4.8-4.1.diff.gz
scponly_4.8-4.1.dsc
to main/s/scponly/scponly_4.8-4.1.dsc
scponly_4.8-4.1_i386.deb
to main/s/scponly/scponly_4.8-4.1_i386.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Christian Perrier <[email protected]> (supplier of updated scponly package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Fri, 12 Feb 2010 05:56:53 +0100
Source: scponly
Binary: scponly scponly-full
Architecture: source i386
Version: 4.8-4.1
Distribution: unstable
Urgency: low
Maintainer: Thomas Wana <[email protected]>
Changed-By: Christian Perrier <[email protected]>
Description:
scponly - Restricts the commands available to scp- and sftp-users
scponly-full - Restricts the commands available to scp- and sftp-users
Closes: 545188 545733 567776 568503 568723 568988 569202
Changes:
scponly (4.8-4.1) unstable; urgency=low
.
* Non-maintainer upload.
* Fix pending l10n issues. Debconf translations:
- German (Thomas Mueller). Closes: #545188
- Swedish (Martin Bagge). Closes: #545733
- French (Christian Perrier). Closes: #567776
- Basque (Iñaki Larrañaga Murgoitio). Closes: #568503
- Czech (Miroslav Kure). Closes: #568723
- Vietnamese (Clytie Siddall). Closes: #568988
- Spanish (# traductor (campo Last-Translator) y ponga en copia a la
lista de Fernando González de Requena). Closes: #569202
Checksums-Sha1:
fa34da3d5d0fc5c63c41673d76fb8a2af39329d6 1045 scponly_4.8-4.1.dsc
17f061a53fcec2a10662ff1a28f371bb07ea9a09 93371 scponly_4.8-4.1.diff.gz
e7ef8364de6512e25d710ef4cc67cd3fbeb8893b 44692 scponly_4.8-4.1_i386.deb
399b96a434fc36d9d32afafd6b11afa48fd40729 48552 scponly-full_4.8-4.1_i386.deb
Checksums-Sha256:
a78c497d740125e95c14011d6a02bdf4cfddc6567f46a08e3477d41b4323589a 1045
scponly_4.8-4.1.dsc
c7b352e89e33bddb10c2bfc4b2eab3c4ff6ddb0a1da3cc8a3b4ab0216f9e65c5 93371
scponly_4.8-4.1.diff.gz
baa02529ad5529f5828d0f6fb230e0f07037aef009087ddd4fe41fc41f18478c 44692
scponly_4.8-4.1_i386.deb
73a354e3d9d3e0e6f4b3a1b7610bf199922ed58a44233c19ec79b2f5d760ea14 48552
scponly-full_4.8-4.1_i386.deb
Files:
bb89c4f10cc82641fc2d9af9630eee21 1045 utils optional scponly_4.8-4.1.dsc
539e4066d5db316b53137fa2364a081c 93371 utils optional scponly_4.8-4.1.diff.gz
2d8c05ee4a74f30a681c6482d7e195bb 44692 utils optional scponly_4.8-4.1_i386.deb
33a8412df3f64e5f3bf874522a7634ff 48552 utils extra
scponly-full_4.8-4.1_i386.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iD8DBQFLdOHY1OXtrMAUPS0RAj+tAKCDiwKk7gVOleR2bAuwTKJEuQwsoQCfTfqt
iTeqK0OMOERr9w19XtjLukc=
=qbFf
-----END PGP SIGNATURE-----
--- End Message ---
