Your message dated Sun, 30 May 2010 16:41:13 +0200
with message-id <[email protected]>
and subject line Re: Bug#583766: lm-sensors: Wrong config for Tiger MPX
has caused the Debian Bug report #583766,
regarding lm-sensors: Wrong config for Tiger MPX
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
583766: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=583766
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: lm-sensors
Version: 1:3.0.2-1+b2
Severity: normal
Config is wrong on (old) motherboard Tyan Tiger MPX (S2466N-4M).
For example, temperature readings.
vinc...@cocotte-et-le-loup:~$ sensors
w83782d-i2c-0-2d
Adapter: SMBus AMD768 adapter at 80e0
VCore 1: +1.47 V (min = +0.00 V, max = +4.08 V)
VCore 2: +1.54 V (min = +0.00 V, max = +4.08 V)
+3.3V: +1.54 V (min = +3.14 V, max = +3.47 V) ALARM
+5V: +4.73 V (min = +4.76 V, max = +5.24 V) ALARM
+12V: +4.68 V (min = +0.00 V, max = +7.78 V)
-12V: -2.16 V (min = -14.91 V, max = -14.91 V) ALARM
-5V: +2.59 V (min = +1.23 V, max = +2.19 V) ALARM
V5SB: +4.19 V (min = +0.00 V, max = +0.00 V) ALARM
VBat: +4.08 V (min = +2.64 V, max = +3.95 V) ALARM
fan1: 112500 RPM (min = 21093 RPM, div = 2)
fan2: 0 RPM (min = -1 RPM, div = 2) ALARM
fan3: 225000 RPM (min = 42187 RPM, div = 2)
temp1: +80.0°C (high = +0.0°C, hyst = +0.0°C) ALARM sensor =
thermistor
temp2: +79.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
temp3: +80.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
cpu0_vid: +1.500 V
beep_enable:enabled
w83627hf-isa-0c00
Adapter: ISA adapter
VCore 1: +1.46 V (min = +1.42 V, max = +1.57 V)
VCore 2: +1.47 V (min = +1.42 V, max = +1.57 V)
+3.3V: +3.30 V (min = +3.14 V, max = +3.47 V)
+5V: +4.89 V (min = +0.75 V, max = +0.00 V) ALARM
+12V: +9.18 V (min = +10.46 V, max = +8.57 V) ALARM
-12V: -12.28 V (min = -13.18 V, max = -10.80 V)
-5V: +0.03 V (min = -6.10 V, max = -7.71 V) ALARM
V5SB: +5.48 V (min = +0.00 V, max = +3.49 V) ALARM
VBat: +3.25 V (min = +2.13 V, max = +0.26 V) ALARM
fan1: 0 RPM (min = 84375 RPM, div = 2) ALARM
fan2: 0 RPM (min = 84375 RPM, div = 2) ALARM
fan3: 0 RPM (min = 168750 RPM, div = 2) ALARM
temp1: +77.0°C (high = +64.0°C, hyst = +70.0°C) ALARM sensor =
thermistor
temp2: +79.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
temp3: +77.0°C (high = +80.0°C, hyst = +75.0°C) sensor = thermistor
cpu0_vid: +1.500 V
beep_enable:disabled
(Motherboard infos: http://www.tyan.com/archive/products/html/tigermpx.html)
-- System Information:
Debian Release: 5.0.4
APT prefers stable
APT policy: (900, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.30-bpo.2-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages lm-sensors depends on:
ii libc6 2.10.2-6 Embedded GNU C Library: Shared lib
ii libsensors4 1:3.0.2-1+b2 library to read temperature/voltag
ii perl 5.10.0-19lenny2 Larry Wall's Practical Extraction
ii sed 4.1.5-6 The GNU sed stream editor
lm-sensors recommends no packages.
Versions of packages lm-sensors suggests:
ii i2c-tools 3.0.1-1 heterogeneous set of I2C tools for
ii read-edid 1.4.1-2.1 hardware information-gathering too
pn sensord <none> (no description available)
-- no debconf information
--- End Message ---
--- Begin Message ---
Version: 1:3.1.2-6
On Sun, May 30, 2010 at 04:03:06PM +0200, Vincent wrote:
> Package: lm-sensors
> Version: 1:3.0.2-1+b2
> Severity: normal
>
>
> Config is wrong on (old) motherboard Tyan Tiger MPX (S2466N-4M).
> For example, temperature readings.
lm-sensors knows about chips, not motherboards. The configuration is
very different from motherboard to motherboard (even for the same
model), and thus no default configuration can be provided. Moreover
the manufacturer are usually not really cooperative to provide the
configuration values and it often has to be done through reverse
engineering.
Recent versions of lm-sensors has drop any reference to motherboards
in /etc/sensors3.conf and invite users to write their own configuration
or fetch one from the website
In your case, you probably want to download:
http://www.lm-sensors.org/wiki/Configurations/Tyan/S2466-4M
Marking the bug has fixed in version 1:3.1.2-6 as there is now a README
explaining how to do.
--
Aurelien Jarno GPG: 1024D/F1BCDB73
[email protected] http://www.aurel32.net
--- End Message ---
