Your message dated Mon, 13 Dec 2010 02:47:13 +0000
with message-id <[email protected]>
and subject line Bug#606895: fixed in udev 164-3
has caused the Debian Bug report #606895,
regarding linux-image-2.6.32-5-amd64: udevd-work and kernel names disagree
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)


-- 
606895: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=606895
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-14
Severity: minor
Tags: sid squeeze

I keep getting this message at boot time:

udevd-work[377]: kernel-provided name 'uinput' and NAME= 'input/uinput'
disagree, please use SYMLINK+= or change the kernel to provide the proper name

For a similar bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=582639, the
udev mantainer said this was a kernel bug. For this reason I'm reporting it
here.



-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-14) ([email protected]) (gcc 
version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Sun May 30 17:20:42 UTC 2010

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 
root=UUID=43c718d2-f969-4312-b0c2-91544a2b744f ro quiet

** Not tainted

** Kernel log:
[    4.536359] processor LNXCPU:00: registered as cooling_device0
[    4.536795] Switching to clocksource acpi_pm
[    4.614937] ACPI: AC Adapter [ACAD] (on-line)
[    4.615168] input: Lid Switch as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    4.615298] ACPI: Lid Switch [LID]
[    4.615711] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    4.615788] ACPI: Power Button [PWRB]
[    4.615895] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    4.615945] ACPI: Power Button [PWRF]
[    4.616447] input: Sleep Button as 
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input7
[    4.616509] ACPI: Sleep Button [SLPF]
[    4.749441] ACPI: Battery Slot [BAT1] (battery present)
[    4.850769] EDAC MC: Ver: 2.1.0 May 30 2010
[    4.863336] EDAC amd64_edac:  Ver: 3.2.0 May 30 2010
[    4.863409] EDAC amd64: This node reports that Memory ECC is currently 
disabled, set F3x44[22] (0000:00:18.3).
[    4.863414] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
[    4.863416]  Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
[    4.863417]  (Note that use of the override may cause unknown side effects.)
[    4.863433] amd64_edac: probe of 0000:00:18.2 failed with error -22
[    4.880191] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, 
revision 0
[    4.917930] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[    4.940918] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    5.105757] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 
0xa04713/0x200000/0x0
[    5.136527] input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0e/LNXVIDEO:00/input/input8
[    5.136605] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    5.143622] ACPI: WMI: Mapper loaded
[    5.150511] yenta_cardbus 0000:06:04.0: CardBus bridge found [103c:30a4]
[    5.150536] yenta_cardbus 0000:06:04.0: Enabling burst memory read 
transactions
[    5.150543] yenta_cardbus 0000:06:04.0: Using INTVAL to route CSC interrupts 
to PCI
[    5.150545] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to ISA
[    5.150552] yenta_cardbus 0000:06:04.0: TI: mfunc 0x00a61b22, devctl 0x64
[    5.156492] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    5.180902] input: SynPS/2 Synaptics TouchPad as 
/devices/platform/i8042/serio4/input/input9
[    5.217336] [drm] Initialized drm 1.1.0 20060810
[    5.380923] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0ef8, PCI irq 20
[    5.380929] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[    5.380937] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge I/O 
window: 0xa000 - 0xafff
[    5.380941] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory 
window: 0xc0200000 - 0xc02fffff
[    5.380944] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge Memory 
window: 0x80000000 - 0x83ffffff
[    5.420961] phy0: Selected rate control algorithm 'minstrel'
[    5.421639] Registered led device: b43-phy0::radio
[    5.421710] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
[    5.638680] tifm_7xx1 0000:06:04.3: PCI INT B -> GSI 23 (level, low) -> IRQ 
23
[    5.861005] pci 0000:01:05.0: power state changed by ACPI to D0
[    5.861014] pci 0000:01:05.0: power state changed by ACPI to D0
[    5.861023] pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    5.861222] [drm] Initialized radeon 1.32.0 20080528 for 0000:01:05.0 on 
minor 0
[    6.334742] ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 
(level, low) -> IRQ 17
[    6.361748] ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 
(level, low) -> IRQ 17
[    6.472078] MC'97 0 converters and GPIO not ready (0x1)
[    7.041359] Adding 2441840k swap on /dev/sda5.  Priority:-1 extents:1 
across:2441840k 
[    7.413482] loop: module loaded
[    7.731940] EXT4-fs (sda6): mounted filesystem with ordered data mode
[    8.841093] fuse init (API version 7.13)
[    9.583174] input: ACPI Virtual Keyboard Device as 
/devices/virtual/input/input10
[   11.596076] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[   11.673904] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[   11.680420] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[   11.683717] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[   11.804059] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[   11.876273] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   11.878683] eth0: link down
[   11.879077] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.146011] Bluetooth: Core ver 2.15
[   13.146078] NET: Registered protocol family 31
[   13.146080] Bluetooth: HCI device and connection manager initialized
[   13.146083] Bluetooth: HCI socket layer initialized
[   13.173353] Bluetooth: L2CAP ver 2.14
[   13.173356] Bluetooth: L2CAP socket layer initialized
[   13.308663] lp: driver loaded but no devices found
[   13.325356] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   13.325359] Bluetooth: BNEP filters: protocol multicast
[   13.361363] Bluetooth: RFCOMM TTY layer initialized
[   13.361368] Bluetooth: RFCOMM socket layer initialized
[   13.361370] Bluetooth: RFCOMM ver 1.11
[   13.378094] ppdev: user-space parallel port driver
[   13.403566] Bridge firewalling registered
[   13.631769] Bluetooth: SCO (Voice Link) ver 0.6
[   13.631772] Bluetooth: SCO socket layer initialized
[   15.828380] powernow-k8: Found 1 AMD Turion(tm) 64 Mobile Technology ML-40 
processors (1 cpu cores) (version 2.20.00)
[   15.828720] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x4
[   15.828723] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x6
[   15.828725] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0x8
[   15.828727] powernow-k8:    3 : fid 0x8 (1600 MHz), vid 0xa
[   15.828730] powernow-k8:    4 : fid 0x0 (800 MHz), vid 0x16
[   17.047555] [drm] Setting GART location based on new memory map
[   17.048906] [drm] Loading R300 Microcode
[   17.049690] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[   17.106720] [drm] Num pipes: 1
[   17.106731] [drm] writeback test succeeded in 1 usecs
[   91.604783] wlan0: direct probe to AP 00:1f:90:b3:50:cc (try 1)
[   91.606580] wlan0: direct probe responded
[   91.606589] wlan0: authenticate with AP 00:1f:90:b3:50:cc (try 1)
[   91.608623] wlan0: authenticated
[   91.608660] wlan0: associate with AP 00:1f:90:b3:50:cc (try 1)
[   91.610630] wlan0: RX AssocResp from 00:1f:90:b3:50:cc (capab=0x431 status=0 
aid=1)
[   91.610639] wlan0: associated
[   91.612513] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   91.613368] cfg80211: Calling CRDA for country: US
[  102.028039] wlan0: no IPv6 routers present

** Model information
sys_vendor: Hewlett-Packard
product_name: Pavilion dv5000 (EP414UA#ABA)     
product_version: F.22
chassis_vendor: Hewlett-Packard 
chassis_version: N/A
bios_vendor: Hewlett-Packard
bios_version: F.22
board_vendor: Hewlett-Packard 
board_name: 30A4
board_version: 49.25

** Loaded modules:
Module                  Size  Used by
powernow_k8            10978  0 
cpufreq_conservative     5162  0 
cpufreq_powersave        902  0 
cpufreq_stats           2659  0 
cpufreq_userspace       1992  0 
sco                     7209  2 
bridge                 39598  0 
stp                     1440  1 bridge
ppdev                   5030  0 
rfcomm                 29581  0 
bnep                    9427  2 
lp                      7462  0 
parport                27954  2 ppdev,lp
l2cap                  24736  6 rfcomm,bnep
bluetooth              41827  6 sco,rfcomm,bnep,l2cap
uinput                  6376  1 
binfmt_misc             6431  1 
fuse                   50190  1 
loop                   11783  0 
firewire_sbp2          11514  0 
snd_atiixp_modem        8139  0 
snd_atiixp             11221  2 
snd_ac97_codec         99186  2 snd_atiixp_modem,snd_atiixp
ac97_bus                1086  1 snd_ac97_codec
snd_pcm_oss            32591  0 
snd_mixer_oss          12606  1 snd_pcm_oss
snd_pcm                60471  5 
snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss
snd_seq_midi            4400  0 
snd_rawmidi            15515  1 snd_seq_midi
snd_seq_midi_event      4628  1 snd_seq_midi
snd_seq                42881  2 snd_seq_midi,snd_seq_midi_event
snd_timer              15582  3 snd_pcm,snd_seq
snd_seq_device          4493  3 snd_seq_midi,snd_rawmidi,snd_seq
radeon                571930  2 
snd                    46446  12 
snd_atiixp_modem,snd_atiixp,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
ttm                    39986  1 radeon
soundcore               4598  1 snd
arc4                    1274  2 
snd_page_alloc          6249  3 snd_atiixp_modem,snd_atiixp,snd_pcm
tpm_tis                 7336  0 
joydev                  8411  0 
drm_kms_helper         20065  1 radeon
drm                   142551  5 radeon,ttm,drm_kms_helper
i2c_algo_bit            4225  1 radeon
tifm_7xx1               3850  0 
wmi                     4323  0 
yenta_socket           19115  1 
shpchp                 26264  0 
video                  17445  0 
ecb                     1841  2 
pci_hotplug            21203  1 shpchp
k8temp                  3139  0 
tifm_core               4340  1 tifm_7xx1
b43                   146172  0 
tpm                     9917  1 tpm_tis
i2c_piix4               8328  0 
rng_core                3006  1 b43
tpm_bios                4521  1 tpm
edac_core              29261  0 
edac_mce_amd            6433  0 
i2c_core               15712  5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4
output                  1692  1 video
rsrc_nonstatic          7294  1 yenta_socket
battery                 4998  0 
button                  4650  0 
ac                      2192  0 
processor              30231  2 powernow_k8
mac80211              136844  1 b43
cfg80211              101432  2 b43,mac80211
rfkill                 13044  3 bluetooth,cfg80211
serio_raw               3752  0 
psmouse                49777  0 
evdev                   7352  24 
pcspkr                  1699  0 
ext4                  285611  2 
mbcache                 5050  1 ext4
jbd2                   66919  1 ext4
crc16                   1319  2 l2cap,ext4
usbhid                 33260  0 
hid                    62825  1 usbhid
sg                     18744  0 
sr_mod                 12602  0 
cdrom                  29415  1 sr_mod
sd_mod                 29777  4 
crc_t10dif              1276  1 sd_mod
ata_generic             2983  0 
pata_atiixp             3489  3 
ssb                    38618  1 b43
sdhci_pci               5581  0 
sdhci                  13966  1 sdhci_pci
ohci_hcd               19212  0 
8139cp                 15941  0 
pcmcia                 19474  2 b43,ssb
thermal                11674  0 
libata                133520  2 ata_generic,pata_atiixp
mmc_core               45472  3 b43,ssb,sdhci
firewire_ohci          19468  0 
firewire_core          36736  2 firewire_sbp2,firewire_ohci
crc_itu_t               1307  1 firewire_core
thermal_sys            11942  3 video,processor,thermal
pcmcia_core            24118  5 yenta_socket,b43,rsrc_nonstatic,ssb,pcmcia
led_class               2433  2 b43,sdhci
8139too                17981  0 
mii                     3210  2 8139cp,8139too
ehci_hcd               31039  0 
scsi_mod              122117  5 firewire_sbp2,sg,sr_mod,sd_mod,libata
usbcore               121959  4 usbhid,ohci_hcd,ehci_hcd
nls_base                6361  1 usbcore

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state 
DOWN qlen 1000
    link/ether 00:0f:b0:c4:c8:bb brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:14:a5:6a:75:2f brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.2/24 brd 192.168.1.255 scope global wlan0
    inet6 fe80::214:a5ff:fe6a:752f/64 scope link 
       valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN 
    link/ether c6:13:6e:79:33:5d brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
    lo:    4236      58    0    0    0     0          0         0     4236      
58    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0        0      
 0    0    0    0     0       0          0
 wlan0:  565802     881    0    0    0     0          0         0    86102     
636    0    0    0     0       0          0
  pan0:       0       0    0    0    0     0          0         0        0      
 0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    875 total packets received
    43 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    736 incoming packets delivered
    659 requests sent out
    16 outgoing packets dropped
Icmp:
    24 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 24
    24 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 24
IcmpMsg:
        InType3: 24
        OutType3: 24
Tcp:
    29 active connections openings
    0 passive connection openings
    1 failed connection attempts
    0 connection resets received
    1 connections established
    426 segments received
    408 segments send out
    0 segments retransmited
    0 bad segments received.
    3 resets sent
Udp:
    197 packets received
    24 packets to unknown port received.
    0 packet receive errors
    227 packets sent
UdpLite:
TcpExt:
    2 TCP sockets finished time wait in fast timer
    25 delayed acks sent
    255 packet headers predicted
    58 acknowledgments not containing data payload received
    1 connections reset due to unexpected data
IpExt:
    InMcastPkts: 19
    OutMcastPkts: 21
    InBcastPkts: 67
    InOctets: 539429
    OutOctets: 65805
    InMcastOctets: 3161
    OutMcastOctets: 3241
    InBcastOctets: 41004

*** Device features:
eth0: 0x829
lo: 0x13865
pan0: 0xff3865
wlan0: 0x2000

** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RS480 Host Bridge [1002:5950] 
(rev 01)
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 64

00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f] 
(prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00009000-00009fff
        Memory behind bridge: c0100000-c01fffff
        Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
        Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37] 
(prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>

00:13.0 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host 
Controller [1002:4374] (prog-if 10 [OHCI])
        Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller 
[1002:4374]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: ohci_hcd

00:13.1 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB Host 
Controller [1002:4375] (prog-if 10 [OHCI])
        Subsystem: ATI Technologies Inc IXP SB400 USB Host Controller 
[1002:4375]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at c0001000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: ohci_hcd

00:13.2 USB Controller [0c03]: ATI Technologies Inc IXP SB400 USB2 Host 
Controller [1002:4373] (prog-if 20 [EHCI])
        Subsystem: ATI Technologies Inc IXP SB400 USB2 Host Controller 
[1002:4373]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at c0002000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:14.0 SMBus [0c05]: ATI Technologies Inc IXP SB400 SMBus Controller 
[1002:4372] (rev 11)
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Region 0: I/O ports at 8400 [size=16]
        Region 1: Memory at c0003000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: piix4_smbus

00:14.1 IDE interface [0101]: ATI Technologies Inc IXP SB400 IDE Controller 
[1002:4376] (prog-if 8a [Master SecP PriP])
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 8410 [size=16]
        Capabilities: <access denied>
        Kernel driver in use: pata_atiixp

00:14.3 ISA bridge [0601]: ATI Technologies Inc IXP SB400 PCI-ISA Bridge 
[1002:4377]
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:14.4 PCI bridge [0604]: ATI Technologies Inc IXP SB400 PCI-PCI Bridge 
[1002:4371] (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Bus: primary=00, secondary=06, subordinate=08, sec-latency=64
        I/O behind bridge: 0000a000-0000afff
        Memory behind bridge: c0200000-c02fffff
        Prefetchable memory behind bridge: 80000000-83ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 Multimedia audio controller [0401]: ATI Technologies Inc IXP SB400 
AC'97 Audio Controller [1002:4370] (rev 02)
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min), Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at c0003400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ATI IXP AC97 controller

00:14.6 Modem [0703]: ATI Technologies Inc SB400 AC'97 Modem Controller 
[1002:4378] (rev 02) (prog-if 00 [Generic])
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min), Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at c0003800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: ATI IXP MC97 controller

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration [1022:1100]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map [1022:1101]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
DRAM Controller [1022:1102]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control [1022:1103]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Kernel driver in use: k8temp

01:05.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon XPRESS 
200M 5955 (PCIE) [1002:5955] (prog-if 00 [VGA controller])
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 66 (2000ns min), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 9000 [size=256]
        Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at c0120000 [disabled] [size=128K]
        Capabilities: <access denied>

06:02.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 
54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
        Subsystem: Hewlett-Packard Company Broadcom 802.11b/g WLAN [103c:1355]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at c0204000 (32-bit, non-prefetchable) [size=8K]
        Kernel driver in use: b43-pci-bridge

06:04.0 CardBus bridge [0607]: Texas Instruments PCIxx21/x515 Cardbus 
Controller [104c:8031]
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 168, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at c0208000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
        Memory window 0: 80000000-83fff000 (prefetchable)
        Memory window 1: 84000000-87fff000
        I/O window 0: 0000a400-0000a4ff
        I/O window 1: 0000a800-0000a8ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001
        Kernel driver in use: yenta_cardbus

06:04.2 FireWire (IEEE 1394) [0c00]: Texas Instruments OHCI Compliant IEEE 1394 
Host Controller [104c:8032] (prog-if 10 [OHCI])
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin C routed to IRQ 23
        Region 0: Memory at c0209000 (32-bit, non-prefetchable) [size=2K]
        Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: firewire_ohci

06:04.3 Mass storage controller [0180]: Texas Instruments PCIxx21 Integrated 
FlashMedia Controller [104c:8033]
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin B routed to IRQ 23
        Region 0: Memory at c0206000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: <access denied>
        Kernel driver in use: tifm_7xx1

06:04.4 SD Host controller [0805]: Texas Instruments 
PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller [104c:8034]
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64 (1750ns min, 1000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at c020a000 (32-bit, non-prefetchable) [size=256]
        Region 1: Memory at c0209c00 (32-bit, non-prefetchable) [size=256]
        Region 2: Memory at c0209800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: sdhci-pci

06:06.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
        Subsystem: Hewlett-Packard Company Device [103c:30a4]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 128 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 22
        Region 0: I/O ports at a000 [size=256]
        Region 1: Memory at c020a400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: 8139too


** USB devices:
Bus 003 Device 002: ID 062a:0252 Creative Labs 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii  debconf [debconf-2.0]        1.5.32      Debian configuration management sy
ii  initramfs-tools [linux-initr 0.94.4      tools for generating an initramfs
ii  linux-base                   2.6.32-14   Linux image base package
ii  module-init-tools            3.12~pre2-3 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii  firmware-linux-free           2.6.32-14  Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
ii  firmware-linux                0.24       Binary firmware for various driver
ii  firmware-linux-nonfree        0.24       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-5-amd64/postinst/bootloader-test-error-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/postinst/bootloader-error-2.6.32-5-amd64:
  linux-image-2.6.32-5-amd64/prerm/would-invalidate-boot-loader-2.6.32-5-amd64: 
true
  linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
  linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
  linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:



--- End Message ---
--- Begin Message ---
Source: udev
Source-Version: 164-3

We believe that the bug you reported is fixed in the latest version of
udev, which is due to be installed in the Debian FTP archive:

gir1.0-gudev-1.0_164-3_i386.deb
  to main/u/udev/gir1.0-gudev-1.0_164-3_i386.deb
libgudev-1.0-0_164-3_i386.deb
  to main/u/udev/libgudev-1.0-0_164-3_i386.deb
libgudev-1.0-dev_164-3_i386.deb
  to main/u/udev/libgudev-1.0-dev_164-3_i386.deb
libudev-dev_164-3_i386.deb
  to main/u/udev/libudev-dev_164-3_i386.deb
libudev0_164-3_i386.deb
  to main/u/udev/libudev0_164-3_i386.deb
udev-gtk-udeb_164-3_i386.udeb
  to main/u/udev/udev-gtk-udeb_164-3_i386.udeb
udev-udeb_164-3_i386.udeb
  to main/u/udev/udev-udeb_164-3_i386.udeb
udev_164-3.diff.gz
  to main/u/udev/udev_164-3.diff.gz
udev_164-3.dsc
  to main/u/udev/udev_164-3.dsc
udev_164-3_i386.deb
  to main/u/udev/udev_164-3_i386.deb



A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Marco d'Itri <[email protected]> (supplier of updated udev package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Mon, 13 Dec 2010 03:10:20 +0100
Source: udev
Binary: udev libudev0 libudev-dev udev-udeb udev-gtk-udeb libgudev-1.0-0 
gir1.0-gudev-1.0 libgudev-1.0-dev
Architecture: source i386
Version: 164-3
Distribution: unstable
Urgency: medium
Maintainer: Marco d'Itri <[email protected]>
Changed-By: Marco d'Itri <[email protected]>
Description: 
 gir1.0-gudev-1.0 - libgudev-1.0 introspection data
 libgudev-1.0-0 - GObject-based wrapper library for libudev
 libgudev-1.0-dev - libgudev-1.0 development files
 libudev-dev - libudev development files
 libudev0   - libudev shared library
 udev       - /dev/ and hotplug management daemon
 udev-gtk-udeb - libudev shared library (udeb)
 udev-udeb  - /dev/ and hotplug management daemon (udeb)
Closes: 603242 603454 604077 606895
Changes: 
 udev (164-3) unstable; urgency=medium
 .
   * Backported multiple ACL and input-related bug fixes.
   * Stop renaming /dev/uinput (and suppress the associated warning).
     (Closes: #606895)
   * Updated one or more debconf translations.
     (Closes: #603242, #603454, #604077)
Checksums-Sha1: 
 bfaac96e5e1f14fc9fe26257267840ce5344ca90 1424 udev_164-3.dsc
 28c93a4abdff7af2259a602f00be9e4aa9bef4d6 91655 udev_164-3.diff.gz
 c5eb0daa460279d1ec0e947dfb91aaf18ec61905 510246 udev_164-3_i386.deb
 4528a33d984a4e1180dbe3ad59d4ab726f6e0fe5 114744 libudev0_164-3_i386.deb
 6cdd918b03d0cc5f4e8b189318cfc32c73422908 52998 libudev-dev_164-3_i386.deb
 5210620ad097bb96a242fcbb7b4691fe7bfcd337 185212 udev-udeb_164-3_i386.udeb
 6daa457e729c8a3b9b09c70fa212fc2d1e31b936 25058 udev-gtk-udeb_164-3_i386.udeb
 bf6a0ab7d800497d1957ace980ac6d22e78495e3 99820 libgudev-1.0-0_164-3_i386.deb
 55c85f300ce56937814ba3cefa7137d2d35703d0 2492 gir1.0-gudev-1.0_164-3_i386.deb
 9d96bbfc965681aad1068dc72e8d4f366ead00d0 34052 libgudev-1.0-dev_164-3_i386.deb
Checksums-Sha256: 
 40dfa7d51f4d7a770b134ffdd14759377619f809064fd463cd41adfa5db57adb 1424 
udev_164-3.dsc
 1973b46466b0e713db407c984b26a05263b7b015d182929322fa318148fb7f03 91655 
udev_164-3.diff.gz
 9680ce2a86a3de6b73ed7d316836b47f2aba5675ffab1986910486ff02119ea3 510246 
udev_164-3_i386.deb
 b12dee52ce4074dff1f0a0acf69fbf2f437d0fe5e05bb24d82b4671ce73a03b9 114744 
libudev0_164-3_i386.deb
 1025f508e5d38d0b6c98cdc8c7a47096919b5487674e7b86dc62f55285089676 52998 
libudev-dev_164-3_i386.deb
 bd3261406af3278b46e94d70d960efd800cfbb3fb9f646f65b67f34d3b99d979 185212 
udev-udeb_164-3_i386.udeb
 89f024a282fb780cb7555158d06fbce512ca490351d2593f3c3ec22d793c3186 25058 
udev-gtk-udeb_164-3_i386.udeb
 0502ffe40a63f72d0613a4e2904fd4c92cb2901c9d98a735fb65fb0667f61904 99820 
libgudev-1.0-0_164-3_i386.deb
 4ba2ba94099542f82bb80a1c3d23f79bf24ad82f1b6c266863d2693c430fdf64 2492 
gir1.0-gudev-1.0_164-3_i386.deb
 bedb0e8ff880e2afaa28a1382a35f5bde4f59c70ef3e1753789455ea41fe954a 34052 
libgudev-1.0-dev_164-3_i386.deb
Files: 
 d775c0c2e0135779a5a096ee9614217a 1424 admin important udev_164-3.dsc
 bbee97ae522806cd9853752f7c69bdb4 91655 admin important udev_164-3.diff.gz
 e34ca58cc428f11e8bf04753d64e31d9 510246 admin important udev_164-3_i386.deb
 3c508398ae085be9ea2880346efbc5dd 114744 libs optional libudev0_164-3_i386.deb
 0bb1d2e357cc9702fdd31185d0479ca6 52998 libdevel optional 
libudev-dev_164-3_i386.deb
 001f8727e3d285b72bdec4591b9fa267 185212 debian-installer important 
udev-udeb_164-3_i386.udeb
 14651d94984cbbfd3aafe5d2d8c687da 25058 debian-installer optional 
udev-gtk-udeb_164-3_i386.udeb
 fde8cedfa0ec024ada6d3d953d31c1e6 99820 libs optional 
libgudev-1.0-0_164-3_i386.deb
 167ee2f456ab86afb78f3ef2a7a09be8 2492 libs optional 
gir1.0-gudev-1.0_164-3_i386.deb
 78f5827cd715efb0e8697c09369702c3 34052 libdevel optional 
libgudev-1.0-dev_164-3_i386.deb
Package-Type: udeb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)

iEYEARECAAYFAk0FhLQACgkQFGfw2OHuP7FUMQCfTetA4YzQQ2w2Eo7WLbk8O2RJ
0L0An3hekTUqjQWUJPhCKT0smxTCPebP
=sdTI
-----END PGP SIGNATURE-----



--- End Message ---

Reply via email to