Your message dated Sun, 06 Mar 2011 22:54:20 +0000
with message-id <[email protected]>
and subject line Bug#607575: fixed in lirc 0.9.0~pre1-1
has caused the Debian Bug report #607575,
regarding [INTL:da] Danish translation of the debconf templates lirc
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
607575: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=607575
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: lirc
Severity: wishlist
Tags: l10n patch
Please include the attached Danish debconf translations.
joe@joe-desktop:~/over/debian/lirc$ msgfmt --statistics -c -v -o /dev/null da.po
50 oversatte tekster.
bye
Joe
# Danish translation lirc.
# Copyright (C) 2010 lirc & nedenstående oversættere.
# This file is distributed under the same license as the lirc package.
# Morten Brix Pedersen <[email protected]>, 2005.
# Joe Hansen ([email protected]), 2010.
#
#
msgid ""
msgstr ""
"Project-Id-Version: lirc\n"
"Report-Msgid-Bugs-To: [email protected]\n"
"POT-Creation-Date: 2007-10-16 20:17+0200\n"
"PO-Revision-Date: 2010-12-19 12:42+0000\n"
"Last-Translator: Joe Hansen <[email protected]>\n"
"Language-Team: Danish <[email protected]>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#. Type: multiselect
#. Description
#: ../lirc-modules-source.templates:2001
msgid "Drivers to build:"
msgstr "Drivere der skal bygges:"
#. Type: multiselect
#. Description
#: ../lirc-modules-source.templates:2001
msgid ""
" atiusb: ATI/NVidia/X10 I & II RF Remote\n"
" bt829: Tekram M230 Mach64\n"
" cmdir: COMMANDIR USB Transceiver\n"
" gpio: TV cards from FlyVideo98, Avermedia, MiRO and many others\n"
" i2c: TV cards from Hauppauge and PixelView\n"
" igorplugusb: Igor Cesko's USB IR Receiver\n"
" imon: Soundgraph iMON MultiMedian IR/VFD\n"
" it87: ITE IT8705/12 CIR ports (ECS K7S5A, Asus DigiMatrix...)\n"
" mceusb: Windows Media Center Remotes (old version, MicroSoft USB ID)\n"
" mceusb2: Windows Media Center Remotes (new version, Philips et al.)\n"
" parallel: Home-brew parallel-port receiver\n"
" sasem: Dign HV5 HTPC IR/VFD Module\n"
" serial: Home-brew serial-port driver\n"
" sir: Serial InfraRed (IRDA)\n"
" streamzap: Streamzap PC Remote"
msgstr ""
" atiusb: ATI/NVidia/X10 I & II RF Remote\n"
" bt829: Tekram M230 Mach64\n"
" cmdir: COMMANDIR USB Transceiver\n"
" gpio: TV-kort fra FlyVideo98, Avermedia, MiRO og mange andre\n"
" i2c: TV-kort fra Hauppauge og PixelView\n"
" igorplugusb: Igor Ceskos USB IR-modtager\n"
" imon: Soundgraph iMON MultiMedian IR/VFD\n"
" it87: ITE IT8705/12 CIR-porte (ECS K7S5A, Asus DigiMatrix...)\n"
" mceusb: Windows Media Center Remotes (gammel version, MicroSoft USB ID)\n"
" mceusb2: Windows Media Center Remotes (ny version, Philips et al.)\n"
" parallel: Hjemmebrygget parallelportmodtager\n"
" sasem: Dign HV5 HTPC IR/VFD-modul\n"
" serial: Hjemmebrygget serielportdriver\n"
" sir: Seriel infrarød (IRDA)\n"
" streamzap: Streamzap PC Remote"
#. Type: boolean
#. Description
#: ../lirc-modules-source.templates:3001
msgid "Try to automatically select hardware support options?"
msgstr "Forsøg automatisk at vælge indstillinger for understøttelse af hardware?"
#. Type: boolean
#. Description
#: ../lirc-modules-source.templates:3001
msgid ""
"Your previous answers can be used as a basis for guessing the list of kernel "
"modules that should be built, along with their parameters."
msgstr ""
"Dine forrige svar kan bruges, som basis for et gæt på listen af kernemoduler, "
"som skal kompileres sammen med deres parametre."
#. Type: boolean
#. Description
#: ../lirc-modules-source.templates:3001
msgid "Please choose whether this should happen."
msgstr "Vælg venligst hvorvidt dette skal udføres."
#. Type: note
#. Description
#: ../lirc-modules-source.templates:4001
msgid "Additional kernel modules not needed"
msgstr "Yderligere kernemoduler er ikke påkrævet"
#. Type: note
#. Description
#: ../lirc-modules-source.templates:4001
msgid ""
"Unless you want to build LIRC kernel modules for another system, this "
"package is useless on this system."
msgstr ""
"Medmindre du vil bygge LIRC-kernemoduler for et andet system, er denne "
"pakke uden værdi på dette system."
#. Type: note
#. Description
#: ../lirc-modules-source.templates:5001
msgid "Binary modules package build instructions"
msgstr "Kompileringsinstruktioner for binære modulpakker"
#. Type: note
#. Description
#: ../lirc-modules-source.templates:5001
msgid ""
"For instructions on how to build the binary modules package, please read "
"the /usr/share/doc/lirc-modules-source/README.Debian file."
msgstr ""
"For instruktioner på hvordan du kompilerer den binære modulpakke, så "
"læs venligst filen /usr/share/doc/lirc-modules-source/README.Debian."
#. Type: select
#. Choices
#: ../lirc-modules-source.templates:6001
msgid "Standard"
msgstr "Standard"
#. Type: select
#. Description
#: ../lirc-modules-source.templates:6002
msgid "Type of ITE8705/12 CIR port to support:"
msgstr "Type af ITE8705/12 CIR-port der skal understøttes:"
#. Type: select
#. Description
#: ../lirc-modules-source.templates:6002
msgid "Please choose the supported ITE8705/12 CIR port chip:"
msgstr "Vælg venligst den understøttede ITE8705/12 CIR-portchip:"
#. Type: select
#. Description
#: ../lirc-modules-source.templates:6002
msgid ""
" Standard: Standard setup chip;\n"
" DigiMatrix: Setup for Asus DigiMatrix onboard chip."
msgstr ""
" Standard: Standardopsætning af chip;\n"
" DigiMatrix: Opsætning af Asus DigiMatrix' onboard chip."
#. Type: select
#. Choices
#. Type: select
#. Choices
#: ../lirc-modules-source.templates:7001
#: ../lirc-modules-source.templates:12001
msgid "Other"
msgstr "Andet"
#. Type: select
#. Description
#: ../lirc-modules-source.templates:7002
msgid "Serial device to support:"
msgstr "Serielenhed der skal understøttes:"
#. Type: select
#. Description
#: ../lirc-modules-source.templates:7002
msgid "Please choose the supported serial device type:"
msgstr "Vælg venligst den understøtede serielle enhedstype:"
#. Type: select
#. Description
#: ../lirc-modules-source.templates:7002
msgid ""
" ANIMAX: Anir Multimedia Magic;\n"
" IRDEO: IRdeo;\n"
" Other: Any other supported device."
msgstr ""
" ANIMAX: Anir Multimedia Magic;\n"
" IRDEO: IRdeo;\n"
" Andet: En anden understøttet enhed."
#. Type: boolean
#. Description
#: ../lirc-modules-source.templates:8001
msgid "Is the serial IR device a transmitter?"
msgstr "Er den serielle infrarøde enhed en sender?"
#. Type: boolean
#. Description
#: ../lirc-modules-source.templates:9001
msgid "Should the carrier signal be generated by software?"
msgstr "Skal signalet genereres af software?"
#. Type: string
#. Description
#: ../lirc-modules-source.templates:10001
msgid "IR serial device I/O port:"
msgstr "I/O-port for infrarød seriel enhed:"
#. Type: string
#. Description
#: ../lirc-modules-source.templates:11001
msgid "IR serial device IRQ:"
msgstr "IRQ for infrarød seriel enhed:"
#. Type: select
#. Description
#: ../lirc-modules-source.templates:12002
msgid "Type of supported SIR device:"
msgstr "Type af understøttet SIR-enhed:"
#. Type: select
#. Description
#: ../lirc-modules-source.templates:12002
msgid "Please choose the supported SIR device type:"
msgstr "Vælg venligst den understøttede SIR-enhedstype:"
#. Type: select
#. Description
#: ../lirc-modules-source.templates:12002
msgid ""
" ACTISYS_ACT200L: Actisys Act200L dongle;\n"
" TEKRAM: Tekram Irmate 210 (16x50 UART compatible serial port);\n"
" Other: Any other supported device."
msgstr ""
" ACTISYS_ACT200L: Actisys Act200L dongle;\n"
" TEKRAM: Tekram Irmate 210 (16x50 UART-kompatibel seriel port);\n"
" Andet: En anden understøttet enhed."
#. Type: string
#. Description
#: ../lirc-modules-source.templates:13001
msgid "SIR device I/O port:"
msgstr "I/O-port for SIR-enhed:"
#. Type: string
#. Description
#: ../lirc-modules-source.templates:14001
msgid "SIR device IRQ:"
msgstr "IRQ for SIR-enhed:"
#. Type: string
#. Description
#: ../lirc-modules-source.templates:15001
msgid "Parallel IR device I/O port:"
msgstr "I/O-port for parallel infrarød enhed:"
#. Type: string
#. Description
#: ../lirc-modules-source.templates:16001
msgid "Parallel IR device IRQ:"
msgstr "IRQ for parallel infrarød enhed:"
#. Type: string
#. Description
#: ../lirc-modules-source.templates:17001
msgid "Parallel IR device timer:"
msgstr "Timer for parallel infrarød enhed:"
#. Type: boolean
#. Description
#: ../lirc-modules-source.templates:18001
msgid "Automatically build the modules?"
msgstr "Kompiler automatisk modulerne?"
#. Type: boolean
#. Description
#: ../lirc-modules-source.templates:18001
msgid ""
"New LIRC kernel modules can be built and installed if the source and build "
"environment for the current kernel are present locally."
msgstr ""
"Nye LIRC-kernemoduler kan kompileres og installeres, hvis kilden og "
"kompileringsmiljøet for den aktuelle kerne er til stede lokalt."
#. Type: boolean
#. Description
#: ../lirc-modules-source.templates:18001
msgid ""
"Even if you choose this option, you should build and install a binary "
"'kernel modules' package so that the package manager can keep track of the "
"files."
msgstr ""
"Selv om du vælger denne indstilling, bør du kompilere og installere en binær "
"pakke af »kernemoduler«, så pakkehåndteringen kan holde styr på filerne."
#. Type: string
#. Description
#: ../lirc-modules-source.templates:19001
msgid "Kernel source location:"
msgstr "Placering af kernekilde:"
#. Type: string
#. Description
#: ../lirc-modules-source.templates:19001
msgid ""
"Please enter the location of the kernel source tree, to build the lirc "
"kernel modules."
msgstr ""
"Indtast venligst placeringen på kernekildetræet for at kompilere "
"lirc-kernemodulerne."
#. Type: error
#. Description
#: ../lirc-modules-source.templates:20001
msgid "${ksrc}: invalid kernel source tree"
msgstr "${ksrc}: Ugyldigt kernekildetræ"
#. Type: boolean
#. Description
#: ../lirc.templates:2001
msgid "Create LIRC device nodes if they are not there?"
msgstr "Opret LIRC-enhedsknuder hvis de ikke findes?"
#. Type: boolean
#. Description
#: ../lirc.templates:2001
msgid "LIRC needs the /dev/lirc, /dev/lircd and /dev/lircm files in /dev."
msgstr "LIRC kræver filerne /dev/lirc, /dev/lircd og /dev/lircm i /dev."
#. Type: boolean
#. Description
#: ../lirc.templates:3001
msgid "Do you want to reconfigure LIRC?"
msgstr "Vil du rekonfigurere LIRC?"
#. Type: boolean
#. Description
#: ../lirc.templates:3001
msgid ""
"LIRC is already configured, reconfiguring it may overwrite the existing "
"configuration in /etc/lirc/hardware.conf."
msgstr ""
"LIRC er allerede sat op og rekonfigurering vil måske overskrive den "
"eksisterende konfiguration i /etc/lirc/hardware.conf."
#. Type: boolean
#. Description
#: ../lirc.templates:3001
msgid "However, comments, LIRC_ARGS and other unknown code will be preserved."
msgstr ""
"Men kommentarer, LIRC_ARGS og anden ukendt kode vil blive holdt intakt."
#. Type: note
#. Description
#: ../lirc.templates:4001
msgid "Old configuration files found"
msgstr "Gamle konfigurationsfiler fundet"
#. Type: note
#. Description
#: ../lirc.templates:4001
msgid ""
"Previous versions of this package didn't include any configuration file and "
"expected users to create their own /etc/lircd.conf and /etc/lircmd.conf."
msgstr ""
"Tidligere versioner af denne pakke inkluderede ikke en konfigurationsfil, og "
"forventede at brugeren lavede sin egen /etc/lircd.conf og /etc/lircmd.conf."
#. Type: note
#. Description
#: ../lirc.templates:4001
msgid "The new location for these files is /etc/lirc/."
msgstr "Den nye placering for disse filer er /etc/lirc/."
#. Type: note
#. Description
#: ../lirc.templates:4001
msgid ""
"File locations will be corrected but you should check that none of LIRC "
"configuration files are left directly under /etc/."
msgstr ""
"Filplaceringer vil blive rettet, men du bør tjekke at ingen af LIRC-"
"konfigurationsfilerne efterlades direkte i /etc/."
#. Type: note
#. Description
#: ../lirc.templates:14001
msgid "IntelliMouse protocol preferred over IMPS/2"
msgstr "IntelliMouse-protokol foretrukket frem for IMPS/2"
#. Type: note
#. Description
#: ../lirc.templates:14001
msgid ""
"You are currently using lircmd with the IMPS/2 protocol. This is not "
"compatible with the method lircmd uses to simulate a mouse, so IntelliMouse "
"support has been added and is now the preferred protocol."
msgstr ""
"Du bruger aktuelt lircmd med IMPS/2-protokollen. Dette er ikke kompatibelt med "
"metoden, som lircmd bruger til at simulere en mus med, så understøttelse af "
"IntelliMouse er blevet tilføjet og er nu den anbefalede protokol."
#. Type: note
#. Description
#: ../lirc.templates:14001
msgid ""
"You should update /etc/lirc/lircmd.conf and the configuration of any program "
"which uses lircmd as a mouse to use the IntelliMouse protocol instead."
msgstr ""
"Du skal opdatere /etc/lirc/lircmd.conf og opsætningen af de programmer, som "
"bruger lircmd som mus til at bruge IntelliMouse-protokollen."
#. Type: note
#. Description
#: ../lirc.templates:14001
msgid "NOTE: gpm will refuse to use lircmd as a mouse with IMPS/2 protocol."
msgstr "BEMÃRK: gpm vil nægte at bruge lircmd som en mus med IMPS/2 protokol."
#. Type: boolean
#. Description
#: ../lirc.templates:15001
msgid "Delete /var/log/lircd?"
msgstr "Slet /var/log/lircd?"
#. Type: boolean
#. Description
#: ../lirc.templates:15001
msgid ""
"LIRC now uses syslog as a logging mechanism, so /var/log/lircd is no longer "
"relevant."
msgstr ""
"LIRC bruger nu syslog som logningssystem, så /var/log/lircd er ikke længere "
"relevant."
--- End Message ---
--- Begin Message ---
Source: lirc
Source-Version: 0.9.0~pre1-1
We believe that the bug you reported is fixed in the latest version of
lirc, which is due to be installed in the Debian FTP archive:
liblircclient-dev_0.9.0~pre1-1_i386.deb
to main/l/lirc/liblircclient-dev_0.9.0~pre1-1_i386.deb
liblircclient0_0.9.0~pre1-1_i386.deb
to main/l/lirc/liblircclient0_0.9.0~pre1-1_i386.deb
lirc-x_0.9.0~pre1-1_i386.deb
to main/l/lirc/lirc-x_0.9.0~pre1-1_i386.deb
lirc_0.9.0~pre1-1.debian.tar.bz2
to main/l/lirc/lirc_0.9.0~pre1-1.debian.tar.bz2
lirc_0.9.0~pre1-1.dsc
to main/l/lirc/lirc_0.9.0~pre1-1.dsc
lirc_0.9.0~pre1-1_i386.deb
to main/l/lirc/lirc_0.9.0~pre1-1_i386.deb
lirc_0.9.0~pre1.orig.tar.bz2
to main/l/lirc/lirc_0.9.0~pre1.orig.tar.bz2
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Stefan Lippers-Hollmann <[email protected]> (supplier of updated lirc package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Sun, 20 Feb 2011 22:32:56 +0100
Source: lirc
Binary: lirc lirc-x liblircclient-dev liblircclient0
Architecture: source i386
Version: 0.9.0~pre1-1
Distribution: unstable
Urgency: low
Maintainer: lirc Maintainer Team <[email protected]>
Changed-By: Stefan Lippers-Hollmann <[email protected]>
Description:
liblircclient-dev - infra-red remote control support - client library
development fil
liblircclient0 - infra-red remote control support - client library
lirc - infra-red remote control support
lirc-x - infra-red remote control support - X utilities
Closes: 162933 414014 496681 500429 500714 505049 517507 546247 547359 548826
551706 562512 580666 588027 605610 607575
Changes:
lirc (0.9.0~pre1-1) unstable; urgency=low
.
[ Sven Mueller ]
* remove myself from uploaders
.
[ Stefan Lippers-Hollmann ]
* new upstream version 0.9.0~pre1:
- rediff patches against 0.8.6:
+ drop 20_kcompat-2.6.26.patch, applied upstream.
+ drop 21_silence-LIRC_MODE_LIRCCODE-logmessage.patch, it's no longer
necessary due to udev & hal acting upon hotplug events.
+ drop 22_kcompat-2.6.27.patch, applied upstream.
+ drop 23_man_pages_style_fixes.patch, mostly applied upstream.
+ drop 24_kcompat-2.6.29.patch, applied upstream.
+ drop 25_kcompat-2.6.31.patch, applied upstream.
- fixed by the new upstream version:
+ lirc: Please update to version 0.8.4a (Closes: #517507).
+ lirc: The version upstream is now at 0.8.6. Please upgrade this
package as it's a show stopper for me (Closes: #548826).
+ lirc-modules-source: lirc_imon doesnt find hardware (Closes: #500714).
+ lirc: Please add support for blaster of Hauppauge PVR150
(Closes: 505049).
- rediff patches against 0.8.7:
+ drop 23_kcompat-2.6.32.patch, merged upstream
+ drop kcompat-2.6.33.patch, merged upstream
+ drop kcompat-2.6.35.patch, merged upstream
+ add fix-kfreebsd-ftbs.patch
- fixes FTBS on Debian/ kFreeBSD, introduced in 0.8.6
- rediff patches against 0.9.0~pre1:
+ import upstream changes (lirc-0.8.7-63-g77c9429):
~ Remove-a-few-more-CVS-relics
~ add-release-process-notes-for-my-own-sanity
~ add-lirc-encoder-decoder-regression-test
~ make-all-remote-names-unique
~ updated-firefly-remote-definition-from-Bastien-Nocer
~ try-to-standardize-remote-key-names-a-fair-bit
~ lirc_serial-fill-in-dev-pointer
~ Attempt-to-make-lirc_sir-behave-a-bit-better
~ lirc_serial-resync-with-in-kernel-bits
~ commandir-send_status-vs.-packetCounter-bug-fix
~ lirc_serial-fix-tx-support-and-a-memory-leak
+ drop 99_linux-input-layer_config, it should be obsolete now.
+ drop lirc-in-kernel-ioctls, merged upstream.
+ drop 18_pinsys-keycodes.
+ update fix-kfreebsd-ftbs.patch to fix newly introduced __u32/ __u64
breakage on kFreeBSD; extend this change to all non-linux
architectures, given that it fails on hurd as well. Use stdint.h and
ISO C99 uint32_t/ uint64_t.
+ drop 11_cheklib_fix.patch; while it is technically correct, it doesn't
actually have a real effect and is not upstreamable.
+ drop 90_make-module-defines-unique.patch and warning-cleanup.patch,
lirc-modules-source doesn't get built anymore.
+ avoid patching generated Makefiles by ensuring identical dates to avoid
autofoo/ libtool; this allows dropping 02_Makefiles.patch.
+ drop 12_enodev_on_read.patch, it doesn't appear to be required anymore.
* suggest setserial (Closes: #546247).
* drop the udevadm settle call from the init script, it can lead to a
deadlock in combination with hotpluggable/ udev aware devices.
* fix conditional branches for 22_kcompat-2.6.27.patch (Closes: #547359).
* switch to Debian source format 3.0 (quilt).
* adapt watch file for bzip2 tarballs.
* drop debian/TODO, most entries are obsolete.
* create /var/run/lirc/ as needed.
* use --oknodo for start-stop-daemon.
* lirc 0.8.6 moves the lircd socket from /dev/ to /var/run/lirc/, create a
symlink to retain compatibility with old clients.
* partial sync with Ubuntu's lirc 0.8.6-0ubuntu2:
[ Mario Limonciello ]
- debian/control: add build-depends on libftdi-dev to prevent FTBFS.
- [PATCH 8/8] Add udev support to lirc and init script
- remove build time debug messages for kernel drivers
* add compatibility for kernel 2.6.32 (Closes: #562512, #588027).
* add compatibility for kernel 2.6.33/ 2.6.34.
* add maintainerclean target to debian/rules, to ease dealing with the
current way of maintaining the lirc package with svn-buildpackage's
mergeWithUpstream mode.
* document the kernel/ userspace ABI breakage between lirc 0.8.6 and earlier
versions in NEWS.
* debian/rules: fix stanza dependencies for parallel building (FTBS on
buildds with activated build concurrency).
* fix lintian complaint about "lirc: conflicts-with-version makedev
(<< 2.3.1-88)", a recent enough makedev (or none at all, if using udev) is
only required by postinst, not at unpack time.
* debian/NEWS: fix cosmetic formatting issues as pointed out by lintian:
- lirc: debian-news-entry-uses-asterisk
- lirc: debian-news-entry-without-blank-line line 13
* add compatibility for kernel 2.6.35.
* bump compat level to 8, supported by debhelper >=7.9.3 in squeeze.
- replace dh_clean -k by dh_prep.
* drop silent clobbering of the lirc configuration with misplaced files.
* make syntax check for hardware.conf more robust.
* drop obsolete lirc-svga package, its functionality is also provided by
lirc-x and has only been built for x86.
* drop and conflict with (using breaks) lirc-modules-source, starting with
kernel 2.6.36 lirc has been merged mainline and this package targets
post-squeeze anyways - this indirectly fixes:
- Failed to attach i2c client PV951 IR at 0x4b (-17) (Closes: #500429)
- lirc 0.8.3-5 breaks mceusb2 remote (Closes: #551706), replaced by new
in-kernel RC_CORE module "mceusb".
- lirc_sir: device fails to resume after suspend (Closes: #414014)
- sysfs: duplicate filename '0-0018' can not be created (Closes: #496681)
* rename patches for upstream submission:
- 04_man_pages_syntax_fixes.patch --> man-pages_syntax-fixes.patch
- 05_non_linux.patch --> lirc_fix-build-on-non-Linux-architectures.patch
- 22_fix-spelling-errors.patch --> lirc_fix-spelling-errors.patch
- 13_hurd_define_iotbase_u32.patch --> hurd_define-iotbase_u32.patch
* external ABI between kernel modules broke between 0.8.3 --> 0.8.4 and
0.8.7 --> 0.9.0, break lirc-modules-source (<<0.9.0~).
* drop obsolete debconf configuration:
- lirc should use debconf more fully (Closes: #162933)
- [INTL:nl] Updated Dutch po-debconf translation (Closes: #605610).
- [INTL:da] Danish translation of the debconf templates (Closes: #607575)
* drop pre-woody compatibility.
* don't try to install the upstream "ChangeLog", it's empty since upstream
moved to git.
* don't symlink /usr/share/doc/<package>/ anymore.
* declare a build-conflicts with libsvga1-dev.
* suggest "ir-keytable", it is required to configure scancodes for in-kernel
modules using the new RC_CORE subsystem.
* bump standards version to 3.9.1, now that the major roadblocks are finally
fixed.
* document that lirc uses syslog for all logging functionality since 0.6.5-1,
(Closes: #580666).
* use current maintainer script syntax.
* drop pre-squeeze versioned depends.
Checksums-Sha1:
59172ae04321197f93a4e2f448a47477a6201385 2162 lirc_0.9.0~pre1-1.dsc
fac03b06a1b3476e24d2bbc70b96059ccda5d7e3 837920 lirc_0.9.0~pre1.orig.tar.bz2
ae2f32ee2d7be75d86edf78abc4b72f6ce8b585f 62229 lirc_0.9.0~pre1-1.debian.tar.bz2
ca4eb729b0b6655e0d9b18cd67c8b03ce4b5a978 545042 lirc_0.9.0~pre1-1_i386.deb
fe5c7c17cc5d75d86f339de497edeb1a0cef6970 108872 lirc-x_0.9.0~pre1-1_i386.deb
1e2358d4f9f2c16b97c56c289bfe84ead21e267d 37726
liblircclient-dev_0.9.0~pre1-1_i386.deb
c60d2bad0b89cbcab630695a3c8c5db34139a854 34926
liblircclient0_0.9.0~pre1-1_i386.deb
Checksums-Sha256:
5b18c06a70c21da99fc3cb5e35fe97c96adcbbef4df434f2d808a51199da7cd6 2162
lirc_0.9.0~pre1-1.dsc
6724514d76077cc087bd4e12d880744442223e7e4ecfd0aa515c1610bc13b5f1 837920
lirc_0.9.0~pre1.orig.tar.bz2
3dbf64425104bf532d295389f4e3ce6dfc5389277755ddec02cb0ef6a75ad2fb 62229
lirc_0.9.0~pre1-1.debian.tar.bz2
504359c80b3ed1657e13d9d0ba82a34d76f3991f9d4725cd242a3ba1790d425e 545042
lirc_0.9.0~pre1-1_i386.deb
347cb283e4a65d6726d01aa2e69524cd24c75766fa033d124f1dfd826f462bae 108872
lirc-x_0.9.0~pre1-1_i386.deb
82cd4b4953642e4d1a3b74ffec28a4e63bff8cc0183f3dcd85e2127c79a21275 37726
liblircclient-dev_0.9.0~pre1-1_i386.deb
ce3ca6ebeb403b3ff5ab0cc90090fb944f174a4ce5e7a6052d6bd68fee939aeb 34926
liblircclient0_0.9.0~pre1-1_i386.deb
Files:
c6cb946d480d93feb4e49aa803c22819 2162 utils extra lirc_0.9.0~pre1-1.dsc
13ba59178adee4e6be8a9a1966ab3133 837920 utils extra
lirc_0.9.0~pre1.orig.tar.bz2
9e803ef255cd7bc9060d607ce766fd5a 62229 utils extra
lirc_0.9.0~pre1-1.debian.tar.bz2
d67105aa79c0ea572169279191c83a54 545042 utils extra lirc_0.9.0~pre1-1_i386.deb
448398499fad225f26b6071f5262e973 108872 utils extra
lirc-x_0.9.0~pre1-1_i386.deb
0d21cf8118a52ee4e8c9c1c87df035b8 37726 libdevel extra
liblircclient-dev_0.9.0~pre1-1_i386.deb
33df4ab10b90cd0e8e7ca37e7e8b5f39 34926 libs optional
liblircclient0_0.9.0~pre1-1_i386.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=kheO
-----END PGP SIGNATURE-----
--- End Message ---
