Your message dated Mon, 25 Jul 2011 21:56:51 +0000
with message-id <[email protected]>
and subject line Bug#600796: fixed in rlinetd 0.8-1
has caused the Debian Bug report #600796,
regarding approx: Cannot find cached rlinetd's config files for service
^(\d|\w)+\s.appro, ignoring remove request
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
600796: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=600796
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: approx
Version: 4.5-1
Severity: normal
While upgrading approx 4.2-1 -> 4.5-1 I face this problem:
Setting up approx (4.5-1) ...
Cannot find cached rlinetd's config files for service ^(\d|\w)+\s.appro,
ignoring remove request
*** WARNING: ucf was run from a maintainer script that uses debconf, but
the script did not pass --debconf-ok to ucf. The maintainer
script should be fixed to not stop debconf before calling ucf,
and pass it this parameter. For now, ucf will revert to using
old-style, non-debconf prompting. Ugh!
Please inform the package maintainer about this problem.
Need debconf to interact
dpkg: error processing approx (--configure):
subprocess installed post-installation script returned error exit status 2
configured to not write apport reports
Errors were encountered while
processing:
approx
E: Sub-process /usr/bin/dpkg returned an error code (1)
A package failed to install. Trying to recover:
Setting up approx (4.5-1) ...
Cannot find cached rlinetd's config files for service ^(\d|\w)+\s.appro,
ignoring remove request
*** WARNING: ucf was run from a maintainer script that uses debconf, but
the script did not pass --debconf-ok to ucf. The maintainer
script should be fixed to not stop debconf before calling ucf,
and pass it this parameter. For now, ucf will revert to using
old-style, non-debconf prompting. Ugh!
Please inform the package maintainer about this problem.
Need debconf to interact
dpkg: error processing approx (--configure):
subprocess installed post-installation script returned error exit status 2
Errors were encountered while processing:
approx
Press return to continue.
approx remains unconfigured.
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (990, 'unstable'), (200, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-3-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages approx depends on:
ii adduser 3.112+nmu1 add and remove users and groups
ii bzip2 1.0.5-6 high-quality block-sorting file co
ii curl 7.21.2-1 Get a file from an HTTP, HTTPS or
ii debconf [debconf-2.0] 1.5.36 Debian configuration management sy
ii libc6 2.11.2-6 Embedded GNU C Library: Shared lib
ii libpcre3 8.02-1.1 Perl 5 Compatible Regular Expressi
ii rlinetd [inet-superserver] 0.7-1 gruesomely over-featured inetd rep
ii update-inetd 4.38 inetd configuration file updater
approx recommends no packages.
Versions of packages approx suggests:
pn libconfig-model-approx-perl <none> (no description available)
-- Configuration Files:
/etc/approx/approx.conf changed:
interval 525600
debian http://ftp.de.debian.org/debian
marillat ftp://ftp.nerim.net/debian-marillat
cihar http://debian.cihar.com/
scrapy http://archive.scrapy.org/ubuntu
-- debconf information:
approx/port: 9999
--- End Message ---
--- Begin Message ---
Source: rlinetd
Source-Version: 0.8-1
We believe that the bug you reported is fixed in the latest version of
rlinetd, which is due to be installed in the Debian FTP archive:
rlinetd_0.8-1.debian.tar.gz
to main/r/rlinetd/rlinetd_0.8-1.debian.tar.gz
rlinetd_0.8-1.dsc
to main/r/rlinetd/rlinetd_0.8-1.dsc
rlinetd_0.8-1_i386.deb
to main/r/rlinetd/rlinetd_0.8-1_i386.deb
rlinetd_0.8.orig.tar.gz
to main/r/rlinetd/rlinetd_0.8.orig.tar.gz
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Robert Luberda <[email protected]> (supplier of updated rlinetd package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Mon, 25 Jul 2011 22:52:22 +0200
Source: rlinetd
Binary: rlinetd
Architecture: source i386
Version: 0.8-1
Distribution: unstable
Urgency: low
Maintainer: Robert Luberda <[email protected]>
Changed-By: Robert Luberda <[email protected]>
Description:
rlinetd - gruesomely over-featured inetd replacement
Closes: 600796 627717 630216 630218 634776
Changes:
rlinetd (0.8-1) unstable; urgency=low
.
* New upstream version:
+ German man pages translations added (closes: #630216);
+ typos in man pages fixed (closes: #630218).
* update-inetd.sh: save original inetd(8) line in generated files and
add support for regex as an argument for --remove (closes: #600796).
* Add Danish translation of debconf templates (closes: #627717).
* Switch to 3.0 (quilt) format.
* debian/rules: Use tiny debhelper v8 format.
* debian/control:
+ use [linux-any] instead of [!kfreebsd-i386 ...] (closes: #634776);
+ add build-dependency on autotools-dev;
+ drop conflict with ancient version of netbase (lintian);
+ Standards-Version: 3.9.2 (no changes).
+ reformat dependency fields with wrap-and-sort command.
* Update debian/watch.
Checksums-Sha1:
77f4e7d3056cf644826aea278354eaa332790e8b 1037 rlinetd_0.8-1.dsc
ed9c270c2c6a00cf7d4307f8da6f58ae11a6c815 525516 rlinetd_0.8.orig.tar.gz
9526cd939ee0f5fe23d3690144d2a18cc9464934 15474 rlinetd_0.8-1.debian.tar.gz
626c51829dd6a150c3f49f043b80cec726cf37f9 103222 rlinetd_0.8-1_i386.deb
Checksums-Sha256:
b0eb12501c9726e7083fde88f64ea23cc45fd7e8f7e06fa0424c94033ae8d141 1037
rlinetd_0.8-1.dsc
83a2f595a70ec531842ff312e87167ff46114fb7221f3502787a6168af7dc43f 525516
rlinetd_0.8.orig.tar.gz
4bc8f6147fd1dd140136289c1a72611cd9974aaac0505eafac56d5f198e71e08 15474
rlinetd_0.8-1.debian.tar.gz
cad82dbcbff1544d92aca5c23d5aa1ac2c02b3f74775614d7ea97d9154eba59d 103222
rlinetd_0.8-1_i386.deb
Files:
c9abfce9ae14d9aed88dfd8bf79561c8 1037 net extra rlinetd_0.8-1.dsc
7d665e66a5b9840f41781a8cd16133af 525516 net extra rlinetd_0.8.orig.tar.gz
61ac336b2687a73924488e4117e3157f 15474 net extra rlinetd_0.8-1.debian.tar.gz
4e3f860829e3f440396e30798d2eeba2 103222 net extra rlinetd_0.8-1_i386.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEARECAAYFAk4t2GcACgkQThh1cJ0wnDtoSACfQ7RVnhfdHYiRgM6vqisGPPIr
yTIAnjRE5wmExghqVr31KZouDMFWSEMk
=XpM2
-----END PGP SIGNATURE-----
--- End Message ---
