Your message dated Sun, 06 Nov 2011 11:02:12 +0000
with message-id <[email protected]>
and subject line Bug#589867: fixed in b43-fwcutter 1:015-4
has caused the Debian Bug report #589867,
regarding firmware-b43-lpphy-installer: wireless network only up when reboot
system. can't change wireless network. don't resolved ip
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
589867: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=589867
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: firmware-b43-lpphy-installer
Version: 4.174.64.19-4
Severity: normal
[ 6.856309] b43 ssb0:0: firmware: requesting b43/ucode15.fw
[ 6.889898] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw
[ 6.912802] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw
[ 7.077355] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 7.108439] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input10
[ 12.625470] b43-phy0 ERROR: Fatal DMA error: 0x00000400, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000
[ 12.635706] b43-phy0 ERROR: This device does not support DMA on your system.
Please use PIO instead.
[ 12.638883] b43-phy0: Controller RESET (DMA error) ...
[ 12.872404] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
[ 18.401289] b43-phy0: Controller restarted
[ 18.402572] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.420893] r8169: eth0: link down
[ 18.421821] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.810769] Bluetooth: L2CAP ver 2.14
[ 18.810776] Bluetooth: L2CAP socket layer initialized
[ 18.861654] Bluetooth: RFCOMM TTY layer initialized
[ 18.861668] Bluetooth: RFCOMM socket layer initialized
[ 18.861675] Bluetooth: RFCOMM ver 1.11
[ 18.893864] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.893874] Bluetooth: BNEP filters: protocol multicast
[ 18.900147] lp: driver loaded but no devices found
[ 18.930058] Bridge firewalling registered
[ 18.945037] ppdev: user-space parallel port driver
[ 19.020753] Bluetooth: SCO (Voice Link) ver 0.6
[ 19.020762] Bluetooth: SCO socket layer initialized
[ 24.291486] CPU0 attaching NULL sched-domain.
[ 24.291500] CPU1 attaching NULL sched-domain.
[ 24.317126] CPU0 attaching sched-domain:
[ 24.317135] domain 0: span 0-1 level SIBLING
[ 24.317141] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 24.317153] domain 1: span 0-1 level MC
[ 24.317159] groups: 0-1 (cpu_power = 1178)
[ 24.317170] CPU1 attaching sched-domain:
[ 24.317175] domain 0: span 0-1 level SIBLING
[ 24.317180] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 24.317191] domain 1: span 0-1 level MC
[ 24.317196] groups: 0-1 (cpu_power = 1178)
[ 31.526993] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 1)
[ 31.529508] wlan0: direct probe responded
[ 31.529521] wlan0: authenticate with AP 00:50:7f:39:11:68 (try 1)
[ 31.533272] wlan0: authenticated
[ 31.533329] wlan0: associate with AP 00:50:7f:39:11:68 (try 1)
[ 31.538275] wlan0: RX AssocResp from 00:50:7f:39:11:68 (capab=0x431 status=0
aid=1)
[ 31.538285] wlan0: associated
[ 31.540546] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 42.221040] wlan0: no IPv6 routers present
[ 784.488194] No probe response from AP 00:50:7f:39:11:68 after 500ms,
disconnecting.
[ 785.509939] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 1)
[ 785.512521] wlan0: direct probe responded
[ 785.512542] wlan0: authenticate with AP 00:50:7f:39:11:68 (try 1)
[ 785.514545] wlan0: authenticated
[ 785.514634] wlan0: associate with AP 00:50:7f:39:11:68 (try 1)
[ 785.517720] wlan0: RX AssocResp from 00:50:7f:39:11:68 (capab=0x431 status=0
aid=1)
[ 785.517739] wlan0: associated
[ 915.488144] No probe response from AP 00:50:7f:39:11:68 after 500ms,
disconnecting.
[ 916.510079] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 1)
[ 916.709161] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 2)
[ 916.908175] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 3)
[ 916.910949] wlan0: direct probe responded
[ 916.910965] wlan0: authenticate with AP 00:50:7f:39:11:68 (try 1)
[ 916.914811] wlan0: authenticated
[ 916.914911] wlan0: associate with AP 00:50:7f:39:11:68 (try 1)
[ 916.918170] wlan0: RX AssocResp from 00:50:7f:39:11:68 (capab=0x431 status=0
aid=1)
[ 916.918190] wlan0: associated
[ 1010.488211] No probe response from AP 00:50:7f:39:11:68 after 500ms,
disconnecting.
[ 1011.502029] wlan0: direct probe to AP 00:50:7f:39:11:68 (try 1)
[ 1011.504583] wlan0: direct probe responded
[ 1011.504605] wlan0: authenticate with AP 00:50:7f:39:11:68 (try 1)
[ 1011.506512] wlan0: authenticated
[ 1011.506614] wlan0: associate with AP 00:50:7f:39:11:68 (try 1)
[ 1011.510283] wlan0: RX AssocResp from 00:50:7f:39:11:68 (capab=0x431 status=0
aid=1)
[ 1011.510303] wlan0: associated
[ 2319.904191] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 2320.037279] usb 1-8: New USB device found, idVendor=0ace, idProduct=1215
[ 2320.037296] usb 1-8: New USB device strings: Mfr=16, Product=32,
SerialNumber=0
[ 2320.037309] usb 1-8: Product: USB2.0 WLAN
[ 2320.037318] usb 1-8: Manufacturer: ZyDAS
[ 2320.040600] usb 1-8: configuration #1 chosen from 1 choice
[ 2320.191752] usb 1-8: reset high speed USB device using ehci_hcd and address
4
[ 2320.322606] phy1: Selected rate control algorithm 'minstrel'
[ 2320.327112] zd1211rw 1-8:1.0: phy1
[ 2320.327259] usbcore: registered new interface driver zd1211rw
[ 2320.366097] usb 1-8: firmware: requesting zd1211/zd1211b_ub
[ 2320.382897] usb 1-8: firmware: requesting zd1211/zd1211b_uphr
[ 2320.464180] zd1211rw 1-8:1.0: firmware version 4725
[ 2320.504194] zd1211rw 1-8:1.0: zd1211b chip 0ace:1215 v4810 high 00-02-72
AL2230_RF pa0 g--NS
[ 2320.507091] cfg80211: Calling CRDA for country: DE
[ 2320.552179] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 2331.641749] wlan1: direct probe to AP 00:50:7f:39:11:68 (try 1)
[ 2331.643818] wlan1: direct probe responded
[ 2331.643830] wlan1: authenticate with AP 00:50:7f:39:11:68 (try 1)
[ 2331.645562] wlan1: authenticated
[ 2331.645612] wlan1: associate with AP 00:50:7f:39:11:68 (try 1)
[ 2331.647928] wlan1: RX AssocResp from 00:50:7f:39:11:68 (capab=0x431 status=0
aid=2)
[ 2331.647937] wlan1: associated
[ 2331.654170] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 2341.732075] wlan1: no IPv6 routers present
[ 2430.977107] wlan0: deauthenticating from 00:50:7f:39:11:68 by local choice
(reason=3)
[ 2437.329002] wlan0: direct probe to AP 00:18:84:80:30:62 (try 1)
[ 2437.332982] wlan0: direct probe responded
[ 2437.333003] wlan0: authenticate with AP 00:18:84:80:30:62 (try 1)
[ 2437.337711] wlan0: authenticated
[ 2437.337798] wlan0: associate with AP 00:18:84:80:30:62 (try 1)
[ 2437.342148] wlan0: RX AssocResp from 00:18:84:80:30:62 (capab=0x431 status=0
aid=2)
[ 2437.342170] wlan0: associated
[ 2437.346853] cfg80211: Calling CRDA for country: NA
[ 2445.488146] No probe response from AP 00:18:84:80:30:62 after 500ms,
disconnecting.
[ 2446.546564] wlan0: direct probe to AP 00:18:84:80:30:62 (try 1)
[ 2446.745148] wlan0: direct probe to AP 00:18:84:80:30:62 (try 2)
[ 2446.944124] wlan0: direct probe to AP 00:18:84:80:30:62 (try 3)
[ 2447.144134] wlan0: direct probe to AP 00:18:84:80:30:62 timed out
-- System Information:
Debian Release: squeeze/sid
APT prefers testing-proposed-updates
APT policy: (500, 'testing-proposed-updates'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=es_ES.utf8, LC_CTYPE=es_ES.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages firmware-b43-lpphy-installer depends on:
ii b43-fwcutter 1:013-2 Utility for extracting Broadcom 43
ii bzip2 1.0.5-4 high-quality block-sorting file co
ii wget 1.12-2 retrieves files from the web
Versions of packages firmware-b43-lpphy-installer recommends:
ii linux-image-2.6.32-5-686 [lin 2.6.32-15 Linux 2.6.32 for modern PCs
firmware-b43-lpphy-installer suggests no packages.
-- no debconf information
--- End Message ---
--- Begin Message ---
Source: b43-fwcutter
Source-Version: 1:015-4
We believe that the bug you reported is fixed in the latest version of
b43-fwcutter, which is due to be installed in the Debian FTP archive:
b43-fwcutter_015-4.debian.tar.gz
to contrib/b/b43-fwcutter/b43-fwcutter_015-4.debian.tar.gz
b43-fwcutter_015-4.dsc
to contrib/b/b43-fwcutter/b43-fwcutter_015-4.dsc
b43-fwcutter_015-4_i386.deb
to contrib/b/b43-fwcutter/b43-fwcutter_015-4_i386.deb
firmware-b43-installer_015-4_all.deb
to contrib/b/b43-fwcutter/firmware-b43-installer_015-4_all.deb
firmware-b43-lpphy-installer_015-4_all.deb
to contrib/b/b43-fwcutter/firmware-b43-lpphy-installer_015-4_all.deb
firmware-b43legacy-installer_015-4_all.deb
to contrib/b/b43-fwcutter/firmware-b43legacy-installer_015-4_all.deb
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to [email protected],
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Fabrizio Regalli <[email protected]> (supplier of updated b43-fwcutter package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing [email protected])
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Sun, 06 Nov 2011 11:22:28 +0100
Source: b43-fwcutter
Binary: b43-fwcutter firmware-b43-installer firmware-b43-lpphy-installer
firmware-b43legacy-installer
Architecture: source all i386
Version: 1:015-4
Distribution: unstable
Urgency: low
Maintainer: Fabrizio Regalli <[email protected]>
Changed-By: Fabrizio Regalli <[email protected]>
Description:
b43-fwcutter - Utility for extracting Broadcom 43xx firmware
firmware-b43-installer - Installer package for firmware for the b43 driver
firmware-b43-lpphy-installer - Installer package for firmware for the b43
driver (LP-PHY version
firmware-b43legacy-installer - Installer package for firmware for the
b43legacy driver
Closes: 589867
Changes:
b43-fwcutter (1:015-4) unstable; urgency=low
.
* Added README.firmware-b43-lpphy-installer (Closes: #589867)
Checksums-Sha1:
65fc5c947a59fa1925b2a4c11105fca3a22f0040 2157 b43-fwcutter_015-4.dsc
37f77c8b5769399a79014a3c0ecafb98b41d3c1f 9644 b43-fwcutter_015-4.debian.tar.gz
3b7267c6664a5144e8a65b9ad57e1dc457933f28 8478
firmware-b43-installer_015-4_all.deb
e1df875b19ad0656277f46de4167f94fb4fc984b 7790
firmware-b43legacy-installer_015-4_all.deb
b872858f74c8a15c96aaa9ff64d793b82b2ae999 8402
firmware-b43-lpphy-installer_015-4_all.deb
80f72ce1478c8bfd19b324b22950fa57fb75845c 21910 b43-fwcutter_015-4_i386.deb
Checksums-Sha256:
53fd8fa66babd7254e4cd5dee0c78b4065b8514593f46dd288a11a4885af4a2c 2157
b43-fwcutter_015-4.dsc
bd2fd632c8c649ed6153aa0ee4e8c3ca852ec25abe25aa5aa06282975737918e 9644
b43-fwcutter_015-4.debian.tar.gz
e984b6f92f46ccd6bb32245c34398130dd19540e1ca87391da59a6449b80e87f 8478
firmware-b43-installer_015-4_all.deb
c8eec7c9b30671be0b9d971d366646d6cb3d29b6759305b7e8d2b3ec9267f55e 7790
firmware-b43legacy-installer_015-4_all.deb
473e38704a518377bf8d08ac0d34682d2e8fd715999dd3a8f94a0fcce3fe5765 8402
firmware-b43-lpphy-installer_015-4_all.deb
cd44a98c002182129757085969903acb5f06712a3887974c8d57e5d16d0a115b 21910
b43-fwcutter_015-4_i386.deb
Files:
1d1727c567990a1bd5f96f00761fe0f6 2157 contrib/utils optional
b43-fwcutter_015-4.dsc
72a8884c8df4b660db4c833e2e104ced 9644 contrib/utils optional
b43-fwcutter_015-4.debian.tar.gz
c1c4c4726806c08618802b9ae912b04d 8478 contrib/kernel optional
firmware-b43-installer_015-4_all.deb
6b4648a470634c06d4d86a7a1620b8f1 7790 contrib/kernel optional
firmware-b43legacy-installer_015-4_all.deb
7fa1144843ab841d1c055814aef9e66c 8402 contrib/kernel optional
firmware-b43-lpphy-installer_015-4_all.deb
499a6f7c31cfb52b82ed162478c3f2c1 21910 contrib/utils optional
b43-fwcutter_015-4_i386.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=VSIW
-----END PGP SIGNATURE-----
--- End Message ---
