--- Begin Message ---
Package: xserver-xorg-video-geode
Version: 2.11.8-6
Severity: important
Hello,
I have a (not so) severe problem on an Hercules ecafé EC-800 :
After 30s to 1m IDLE (no user input), video become black
(screensaver / dpms is set graphically to 10 and 30 minutes).
To re-enable video, I need to switch to a virtual console,
then switch back to X (alt-F8), having screensaver timed
on or "not yet".
Notes: * While idle for a long time, the screensaver brievely
appears in the top-level opened window.
* Also, the gnome re-connect window doesn't display
password typing, while this displaying is enabled.
* also tried amd driver, which is... transitional package :>
* had hard times to find correct information while setup
screen ratio. Notably the peculiar "PanelMode" option
and corrects Modelines.
While I use GTK reportbug, it seems xorg.conf will automatically
follow. I will verify in bug report...
Anyway, thanks for the ~1500(wo)men efforts in debian task.
-- Package-specific info:
/var/lib/x11/X.roster does not exist.
/var/lib/x11/X.md5sum does not exist.
X server symlink status:
lrwxrwxrwx 1 root root 13 Jul 28 19:15 /etc/X11/X -> /usr/bin/Xorg
-rwxr-xr-x 1 root root 1725304 Jul 15 18:15 /usr/bin/Xorg
/var/lib/x11/xorg.conf.roster does not exist.
VGA-compatible devices on PCI bus:
00:01.1 VGA compatible controller: Advanced Micro Devices [AMD] Geode LX Video
/var/lib/x11/xorg.conf.md5sum does not exist.
Xorg X server configuration file status:
-rw-r--r-- 1 root root 2032 Aug 2 15:47 /etc/X11/xorg.conf
Contents of /etc/X11/xorg.conf:
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Generic Monitor"
HorizSync 25 - 50.0
VertRefresh 50-75
Modeline "800x480" 33.45 800 840 968 1056 480 490 492 525 -hsync -vsync
Modeline "1024x600" 48.96 1024 1064 1168 1312 600 601 604 622 -hsync
+vsync
Option "dpms"
Option "UseEdidFreqs" "1"
#DisplaySize 176 100
DisplaySize 255 150
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
Identifier "Card0"
Driver "geode"
VendorName "Advanced Micro Devices [AMD]"
BoardName "AMD Geode LX Video"
BusID "PCI:0:1:1"
Option "PanelGeometry" "1024x600"
#Option "NoDDC" "true"
Option "PanelMode" "33450 800 840 968 1056 480 490 492 525"
Option "RenderAccel" "true"
#Option "XaaNoOffscreenPixmaps" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "800x480" "1024x600"
Viewport 0 0
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Manual"
#Screen 0 "Screen0" 0 0
Screen "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "isolateDevice" "PCI:O:1:1"
EndSection
Section "Extensions"
Option "Composite" "enable"
EndSection
Kernel version (/proc/version):
Linux version 2.6.32-5-486 (Debian 2.6.32-15) ([email protected]) (gcc
version 4.3.5 (Debian 4.3.5-1) ) #1 Tue Jun 1 04:27:25 UTC 2010
Xorg X server log files on system:
-rw-r--r-- 1 root root 1457 Jul 29 13:17 /var/log/Xorg.1.log
-rw-r--r-- 1 root root 1457 Jul 29 13:17 /var/log/Xorg.5.log
-rw-r--r-- 1 root root 1457 Jul 29 13:17 /var/log/Xorg.4.log
-rw-r--r-- 1 root root 1457 Jul 29 13:17 /var/log/Xorg.3.log
-rw-r--r-- 1 root root 1457 Jul 29 13:17 /var/log/Xorg.2.log
-rw-r--r-- 1 root root 23921 Aug 2 15:47 /var/log/Xorg.0.log
Contents of most recent Xorg X server log file
/var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-amd64 i686 Debian
Current Operating System: Linux black3 2.6.32-5-486 #1 Tue Jun 1 04:27:25 UTC
2010 i586
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-486
root=/dev/mapper/black3-root ro video=lxfb:1024x600-32 quiet
Build Date: 15 July 2010 04:10:53PM
xorg-server 2:1.7.7-3 (Cyril Brulebois <[email protected]>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 2 15:47:17 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Manual"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "IsolateDevice" "PCI:O:1:1"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81eaca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 8
(--) PCI:*(0:0:1:1) 1022:2081:1022:2081 Advanced Micro Devices [AMD] Geode LX
Video rev 0, Mem @ 0x90000000/33554432, 0x8fffc000/16384, 0x8fff8000/16384,
0x8fff4000/16384, 0x8fff0000/16384
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "geode"
(II) Loading /usr/lib/xorg/modules/drivers/geode_drv.so
(II) Module geode: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.11.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
(II) Primary Device is: PCI 00@00:01:1
AmdPciProbe: Probing for supported devices!
(WW) System lacks support for changing MTRRs
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
Unable to open /dev/cpu/0/msr: 2
(**) GEODE(0): Depth 16, (--) framebuffer bpp 16
(==) GEODE(0): RGB weight 565
(==) GEODE(0): Default visual is TrueColor
(==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
(**) GEODE(0): Option "PanelMode" "33450 800 840 968 1056 480 490 492 525"
(==) GEODE(0): No DCON is present
(II) GEODE(0): LX output options:
(II) GEODE(0): CRT: YES
(II) GEODE(0): PANEL: YES
(II) GEODE(0): DCON: NO
(II) GEODE(0): VGA: YES
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) GEODE(0): Primary V_BIOS segment is: 0xc000
(II) GEODE(0): Output default using monitor section Monitor0
(II) GEODE(0): I2C bus "CS5536 DDC" initialized.
(II) GEODE(0): Not using mode "800x480" (unknown reason)
(II) GEODE(0): Not using mode "1024x600" (unknown reason)
(II) GEODE(0): Not using default mode "640x350" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x175" (vrefresh out of range)
(II) GEODE(0): Not using default mode "640x400" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x200" (vrefresh out of range)
(II) GEODE(0): Not using default mode "720x400" (vrefresh out of range)
(II) GEODE(0): Not using default mode "360x200" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x240" (unknown reason)
(II) GEODE(0): Not using default mode "640x480" (unknown reason)
(II) GEODE(0): Not using default mode "320x240" (unknown reason)
(II) GEODE(0): Not using default mode "320x240" (unknown reason)
(II) GEODE(0): Not using default mode "640x480" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x240" (vrefresh out of range)
(II) GEODE(0): Not using default mode "400x300" (unknown reason)
(II) GEODE(0): Not using default mode "400x300" (unknown reason)
(II) GEODE(0): Not using default mode "400x300" (unknown reason)
(II) GEODE(0): Not using default mode "400x300" (unknown reason)
(II) GEODE(0): Not using default mode "800x600" (vrefresh out of range)
(II) GEODE(0): Not using default mode "400x300" (vrefresh out of range)
(II) GEODE(0): Not using default mode "1024x768" (vrefresh out of range)
(II) GEODE(0): Not using default mode "512x384" (vrefresh out of range)
(II) GEODE(0): Not using default mode "512x384" (unknown reason)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (hsync out of range)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (hsync out of range)
(II) GEODE(0): Not using default mode "1024x768" (vrefresh out of range)
(II) GEODE(0): Not using default mode "512x384" (vrefresh out of range)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (hsync out of range)
(II) GEODE(0): Not using default mode "1280x960" (hsync out of range)
(II) GEODE(0): Not using default mode "640x480" (hsync out of range)
(II) GEODE(0): Not using default mode "1280x960" (vrefresh out of range)
(II) GEODE(0): Not using default mode "640x480" (vrefresh out of range)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (hsync out of range)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (hsync out of range)
(II) GEODE(0): Not using default mode "1280x1024" (vrefresh out of range)
(II) GEODE(0): Not using default mode "640x512" (vrefresh out of range)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "1600x1200" (vrefresh out of range)
(II) GEODE(0): Not using default mode "800x600" (vrefresh out of range)
(II) GEODE(0): Not using default mode "1792x1344" (hsync out of range)
(II) GEODE(0): Not using default mode "896x672" (hsync out of range)
(II) GEODE(0): Not using default mode "1792x1344" (hsync out of range)
(II) GEODE(0): Not using default mode "896x672" (hsync out of range)
(II) GEODE(0): Not using default mode "1856x1392" (hsync out of range)
(II) GEODE(0): Not using default mode "928x696" (hsync out of range)
(II) GEODE(0): Not using default mode "1856x1392" (hsync out of range)
(II) GEODE(0): Not using default mode "928x696" (hsync out of range)
(II) GEODE(0): Not using default mode "1920x1440" (hsync out of range)
(II) GEODE(0): Not using default mode "960x720" (hsync out of range)
(II) GEODE(0): Not using default mode "1920x1440" (hsync out of range)
(II) GEODE(0): Not using default mode "960x720" (hsync out of range)
(II) GEODE(0): Not using default mode "832x624" (unknown reason)
(II) GEODE(0): Not using default mode "416x312" (unknown reason)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (hsync out of range)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (hsync out of range)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (hsync out of range)
(II) GEODE(0): Not using default mode "1152x864" (vrefresh out of range)
(II) GEODE(0): Not using default mode "576x432" (vrefresh out of range)
(II) GEODE(0): Not using default mode "1152x864" (vrefresh out of range)
(II) GEODE(0): Not using default mode "576x432" (vrefresh out of range)
(II) GEODE(0): Not using default mode "1152x864" (vrefresh out of range)
(II) GEODE(0): Not using default mode "576x432" (vrefresh out of range)
(II) GEODE(0): Not using default mode "1360x768" (monitor doesn't support
reduced blanking)
(II) GEODE(0): Not using default mode "680x384" (unknown reason)
(II) GEODE(0): Not using default mode "1360x768" (unknown reason)
(II) GEODE(0): Not using default mode "680x384" (unknown reason)
(II) GEODE(0): Not using default mode "1400x1050" (hsync out of range)
(II) GEODE(0): Not using default mode "700x525" (hsync out of range)
(II) GEODE(0): Not using default mode "1400x1050" (hsync out of range)
(II) GEODE(0): Not using default mode "700x525" (hsync out of range)
(II) GEODE(0): Not using default mode "1400x1050" (hsync out of range)
(II) GEODE(0): Not using default mode "700x525" (hsync out of range)
(II) GEODE(0): Not using default mode "1400x1050" (vrefresh out of range)
(II) GEODE(0): Not using default mode "700x525" (vrefresh out of range)
(II) GEODE(0): Not using default mode "1440x900" (hsync out of range)
(II) GEODE(0): Not using default mode "720x450" (hsync out of range)
(II) GEODE(0): Not using default mode "1600x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "800x512" (hsync out of range)
(II) GEODE(0): Not using default mode "1680x1050" (hsync out of range)
(II) GEODE(0): Not using default mode "840x525" (hsync out of range)
(II) GEODE(0): Not using default mode "1680x1050" (hsync out of range)
(II) GEODE(0): Not using default mode "840x525" (hsync out of range)
(II) GEODE(0): Not using default mode "1680x1050" (hsync out of range)
(II) GEODE(0): Not using default mode "840x525" (hsync out of range)
(II) GEODE(0): Not using default mode "1680x1050" (hsync out of range)
(II) GEODE(0): Not using default mode "840x525" (hsync out of range)
(II) GEODE(0): Not using default mode "1680x1050" (vrefresh out of range)
(II) GEODE(0): Not using default mode "840x525" (vrefresh out of range)
(II) GEODE(0): Not using default mode "1920x1080" (hsync out of range)
(II) GEODE(0): Not using default mode "960x540" (hsync out of range)
(II) GEODE(0): Not using default mode "1920x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "960x600" (hsync out of range)
(II) GEODE(0): Not using default mode "1920x1440" (vrefresh out of range)
(II) GEODE(0): Not using default mode "960x720" (vrefresh out of range)
(II) GEODE(0): Not using default mode "2048x1536" (width too large for virtual
size)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "2048x1536" (width too large for virtual
size)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "2048x1536" (width too large for virtual
size)
(II) GEODE(0): Not using default mode "1024x768" (vrefresh out of range)
(II) GEODE(0): Printing probed modes for output default
(II) GEODE(0): Modeline "800x480"x60.3 33.45 800 840 968 1056 480 490 492
525 (31.7 kHz)
(II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(II) GEODE(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(II) GEODE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(II) GEODE(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(II) GEODE(0): Output default connected
(II) GEODE(0): Using user preference for initial modes
(II) GEODE(0): Output default using initial mode 800x480
(II) GEODE(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(--) GEODE(0): Virtual size is 1024x1024 (pitch 0)
(**) GEODE(0): Driver mode "800x480": 33.5 MHz (scaled from 0.0 MHz), 31.7
kHz, 60.3 Hz
(II) GEODE(0): Modeline "800x480"x60.3 33.45 800 840 968 1056 480 490 492
525 (31.7 kHz)
(**) GEODE(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4
kHz, 60.0 Hz
(II) GEODE(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771
777 806 -hsync -vsync (48.4 kHz)
(**) GEODE(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1
kHz, 72.2 Hz
(II) GEODE(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643
666 +hsync +vsync (48.1 kHz)
(**) GEODE(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9
kHz, 75.0 Hz
(II) GEODE(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604
625 +hsync +vsync (46.9 kHz)
(**) GEODE(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9
kHz, 60.3 Hz
(II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(**) GEODE(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2
kHz, 56.2 Hz
(II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(**) GEODE(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5
kHz, 75.0 Hz
(II) GEODE(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484
500 -hsync -vsync (37.5 kHz)
(**) GEODE(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5
kHz, 59.9 Hz
(II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(**) GEODE(0): Display dimensions: (255, 150) mm
(**) GEODE(0): DPI set to (101, 173)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) GEODE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) GEODE(0): Geode LX video memory 1600000 bytes at 0xb5a89000
(II) GEODE(0): LX video memory:
(II) GEODE(0): Display: 0x200000 bytes
(II) GEODE(0): Compression: 0x88000 bytes
(II) GEODE(0): Cursor: 0x3000 bytes
(II) GEODE(0): EXA: 0xe35000 bytes
(II) GEODE(0): FREE: 0x400000 bytes
(II) EXA(0): Offscreen pixmap area of 14897152 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) GEODE(0): Backing store disabled
(**) GEODE(0): DPMS enabled
(II) GEODE(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(WW) GEODE(0): Option "PanelGeometry" is not used
(WW) GEODE(0): Option "RenderAccel" is not used
(WW) GEODE(0): Option "UseEdidFreqs" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) GEODE(0): Setting screen physical size to 255 x 150
(II) config/udev: Adding input device Power Button (/dev/input/event3)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device Lid Switch (/dev/input/event2)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse
v2.0 (/dev/input/event7)
(**) Microsoft Microsoft Basic Optical Mouse v2.0 : Applying InputClass "evdev
pointer catchall"
(**) Microsoft Microsoft Basic Optical Mouse v2.0 : always reports core events
(**) Microsoft Microsoft Basic Optical Mouse v2.0 : Device: "/dev/input/event7"
(II) Microsoft Microsoft Basic Optical Mouse v2.0 : Found 3 mouse buttons
(II) Microsoft Microsoft Basic Optical Mouse v2.0 : Found scroll wheel(s)
(II) Microsoft Microsoft Basic Optical Mouse v2.0 : Found relative axes
(II) Microsoft Microsoft Basic Optical Mouse v2.0 : Found x and y relative axes
(II) Microsoft Microsoft Basic Optical Mouse v2.0 : Configuring as mouse
(**) Microsoft Microsoft Basic Optical Mouse v2.0 : YAxisMapping: buttons 4
and 5
(**) Microsoft Microsoft Basic Optical Mouse v2.0 : EmulateWheelButton: 4,
EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Basic Optical
Mouse v2.0 " (type: MOUSE)
(II) Microsoft Microsoft Basic Optical Mouse v2.0 : initialized for relative
axes.
(II) config/udev: Adding input device Microsoft Microsoft Basic Optical Mouse
v2.0 (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Hercules Webcam EC300 (/dev/input/event5)
(**) Hercules Webcam EC300: Applying InputClass "evdev keyboard catchall"
(**) Hercules Webcam EC300: always reports core events
(**) Hercules Webcam EC300: Device: "/dev/input/event5"
(II) Hercules Webcam EC300: Found keys
(II) Hercules Webcam EC300: Configuring as keyboard
(II) XINPUT: Adding extended input device "Hercules Webcam EC300" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event0)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
(II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event4)
(**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
(**) PS/2 Generic Mouse: always reports core events
(**) PS/2 Generic Mouse: Device: "/dev/input/event4"
(II) PS/2 Generic Mouse: Found 3 mouse buttons
(II) PS/2 Generic Mouse: Found relative axes
(II) PS/2 Generic Mouse: Found x and y relative axes
(II) PS/2 Generic Mouse: Configuring as mouse
(**) PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10,
EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE)
(II) PS/2 Generic Mouse: initialized for relative axes.
(II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device PC Speaker (/dev/input/event1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device ACPI Virtual Keyboard Device
(/dev/input/event6)
(**) ACPI Virtual Keyboard Device: Applying InputClass "evdev keyboard catchall"
(**) ACPI Virtual Keyboard Device: always reports core events
(**) ACPI Virtual Keyboard Device: Device: "/dev/input/event6"
(II) ACPI Virtual Keyboard Device: Found keys
(II) ACPI Virtual Keyboard Device: Configuring as keyboard
(II) XINPUT: Adding extended input device "ACPI Virtual Keyboard Device" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "fr"
(**) Option "xkb_variant" "latin9"
udev information:
P: /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
N: input/event3
S: char/13:67
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3
E: SUBSYSTEM=input
E: DEVNAME=input/event3
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: MAJOR=13
E: MINOR=67
E: DEVLINKS=/dev/char/13:67
E: DMI_VENDOR=Hercules
P: /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
N: input/event2
S: char/13:66
E: UDEV_LOG=3
E: DEVPATH=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2/event2
E: SUBSYSTEM=input
E: DEVNAME=input/event2
E: ID_INPUT=1
E: DMI_VENDOR=Hercules
E: MAJOR=13
E: MINOR=66
E: DEVLINKS=/dev/char/13:66
P: /devices/pci0000:00/0000:00:0f.4/usb2/2-1/2-1:1.0/input/input8/event7
N: input/event7
S: char/13:71
S: input/by-id/usb-Microsoft_Microsoft_Basic_Optical_Mouse_v2.0-event-mouse
S: input/by-path/pci-0000:00:0f.4-usb-0:1:1.0-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:0f.4/usb2/2-1/2-1:1.0/input/input8/event7
E: SUBSYSTEM=input
E: DEVNAME=input/event7
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft\x20
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft_Basic_Optical_Mouse_v2.0
E: ID_MODEL_ENC=Microsoft\x20Basic\x20Optical\x20Mouse\x20v2.0\x20
E: ID_MODEL_ID=00cb
E: ID_REVISION=0199
E: ID_SERIAL=Microsoft_Microsoft_Basic_Optical_Mouse_v2.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:0f.4-usb-0:1:1.0
E: MAJOR=13
E: MINOR=71
E: DEVLINKS=/dev/char/13:71
/dev/input/by-id/usb-Microsoft_Microsoft_Basic_Optical_Mouse_v2.0-event-mouse
/dev/input/by-path/pci-0000:00:0f.4-usb-0:1:1.0-event-mouse
P: /devices/pci0000:00/0000:00:0f.4/usb2/2-1/2-1:1.0/input/input8/mouse1
N: input/mouse1
S: char/13:33
S: input/by-id/usb-Microsoft_Microsoft_Basic_Optical_Mouse_v2.0-mouse
S: input/by-path/pci-0000:00:0f.4-usb-0:1:1.0-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:0f.4/usb2/2-1/2-1:1.0/input/input8/mouse1
E: SUBSYSTEM=input
E: DEVNAME=input/mouse1
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft\x20
E: ID_VENDOR_ID=045e
E: ID_MODEL=Microsoft_Basic_Optical_Mouse_v2.0
E: ID_MODEL_ENC=Microsoft\x20Basic\x20Optical\x20Mouse\x20v2.0\x20
E: ID_MODEL_ID=00cb
E: ID_REVISION=0199
E: ID_SERIAL=Microsoft_Microsoft_Basic_Optical_Mouse_v2.0
E: ID_TYPE=hid
E: ID_BUS=usb
E: ID_USB_INTERFACES=:030102:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=usbhid
E: ID_PATH=pci-0000:00:0f.4-usb-0:1:1.0
E: MAJOR=13
E: MINOR=33
E: DEVLINKS=/dev/char/13:33
/dev/input/by-id/usb-Microsoft_Microsoft_Basic_Optical_Mouse_v2.0-mouse
/dev/input/by-path/pci-0000:00:0f.4-usb-0:1:1.0-mouse
P: /devices/pci0000:00/0000:00:0f.5/usb1/1-2/1-2.3/1-2.3:1.0/input/input6/event5
N: input/event5
S: char/13:69
S: input/by-id/usb-Guillemot_Corp._Hercules_Webcam_EC300-event-if00
S: input/by-path/pci-0000:00:0f.5-usb-0:2.3:1.0-event
E: UDEV_LOG=3
E:
DEVPATH=/devices/pci0000:00/0000:00:0f.5/usb1/1-2/1-2.3/1-2.3:1.0/input/input6/event5
E: SUBSYSTEM=input
E: DEVNAME=input/event5
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_VENDOR=Guillemot_Corp.
E: ID_VENDOR_ENC=Guillemot\x20Corp.
E: ID_VENDOR_ID=06f8
E: ID_MODEL=Hercules_Webcam_EC300
E: ID_MODEL_ENC=Hercules\x20Webcam\x20EC300
E: ID_MODEL_ID=3020
E: ID_REVISION=0100
E: ID_SERIAL=Guillemot_Corp._Hercules_Webcam_EC300
E: ID_TYPE=video
E: ID_BUS=usb
E: ID_USB_INTERFACES=:0e0100:0e0200:
E: ID_USB_INTERFACE_NUM=00
E: ID_USB_DRIVER=uvcvideo
E: ID_PATH=pci-0000:00:0f.5-usb-0:2.3:1.0
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: MAJOR=13
E: MINOR=69
E: DEVLINKS=/dev/char/13:69
/dev/input/by-id/usb-Guillemot_Corp._Hercules_Webcam_EC300-event-if00
/dev/input/by-path/pci-0000:00:0f.5-usb-0:2.3:1.0-event
P: /devices/platform/i8042/serio0/input/input0/event0
N: input/event0
S: char/13:64
S: input/by-path/platform-i8042-serio-0-event-kbd
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio0/input/input0/event0
E: SUBSYSTEM=input
E: DEVNAME=input/event0
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-0
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: MAJOR=13
E: MINOR=64
E: DEVLINKS=/dev/char/13:64 /dev/input/by-path/platform-i8042-serio-0-event-kbd
E: DMI_VENDOR=Hercules
P: /devices/platform/i8042/serio3/input/input5/event4
N: input/event4
S: char/13:68
S: input/by-path/platform-i8042-serio-3-event-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio3/input/input5/event4
E: SUBSYSTEM=input
E: DEVNAME=input/event4
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-3
E: DMI_VENDOR=Hercules
E: MAJOR=13
E: MINOR=68
E: DEVLINKS=/dev/char/13:68
/dev/input/by-path/platform-i8042-serio-3-event-mouse
P: /devices/platform/i8042/serio3/input/input5/mouse0
N: input/mouse0
S: char/13:32
S: input/by-path/platform-i8042-serio-3-mouse
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/i8042/serio3/input/input5/mouse0
E: SUBSYSTEM=input
E: DEVNAME=input/mouse0
E: ID_INPUT=1
E: ID_INPUT_MOUSE=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-i8042-serio-3
E: MAJOR=13
E: MINOR=32
E: DEVLINKS=/dev/char/13:32 /dev/input/by-path/platform-i8042-serio-3-mouse
P: /devices/platform/pcspkr/input/input1/event1
N: input/event1
S: char/13:65
S: input/by-path/platform-pcspkr-event-spkr
E: UDEV_LOG=3
E: DEVPATH=/devices/platform/pcspkr/input/input1/event1
E: SUBSYSTEM=input
E: DEVNAME=input/event1
E: ID_INPUT=1
E: ID_SERIAL=noserial
E: ID_PATH=platform-pcspkr
E: DMI_VENDOR=Hercules
E: MAJOR=13
E: MINOR=65
E: DEVLINKS=/dev/char/13:65 /dev/input/by-path/platform-pcspkr-event-spkr
P: /devices/virtual/input/input7/event6
N: input/event6
S: char/13:70
E: UDEV_LOG=3
E: DEVPATH=/devices/virtual/input/input7/event6
E: SUBSYSTEM=input
E: DEVNAME=input/event6
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_SERIAL=noserial
E: XKBMODEL=pc105
E: XKBLAYOUT=fr
E: XKBVARIANT=latin9
E: MAJOR=13
E: MINOR=70
E: DEVLINKS=/dev/char/13:70
E: DMI_VENDOR=Hercules
DRM Information from dmesg:
[ 2.772493] Linux agpgart interface v0.103
-- System Information:
Debian Release: squeeze/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i586)
Kernel: Linux 2.6.32-5-486
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages xserver-xorg-video-geode depends on:
ii libc6 2.11.2-2 Embedded GNU C Library: Shared lib
ii xserver-xorg-core 2:1.7.7-3 Xorg X server - core server
Versions of packages xserver-xorg-video-geode recommends:
pn xserver-xorg-video-cyrix <none> (no description available)
pn xserver-xorg-video-nsc <none> (no description available)
xserver-xorg-video-geode suggests no packages.
-- no debconf information
--- End Message ---
