Your message dated Fri, 29 Nov 2013 11:02:01 +0200 (EET)
with message-id <[email protected]>
and subject line Closing old bugs filed against cdrecord (or related packages)
has caused the Debian Bug report #246647,
regarding Burn process breaks reporting an "Input/output error"
to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact [email protected]
immediately.)
--
246647: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=246647
Debian Bug Tracking System
Contact [email protected] with problems
--- Begin Message ---
Package: cdrecord
Version: 4:2.0+a27-1
Severity: grave
Justification: renders package unusable
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (990, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.4.25-toby.sarge
Locale: LANG=C, LC_CTYPE=C
Versions of packages cdrecord depends on:
ii debconf 1.4.22 Debian configuration
management sy
ii libc6 2.3.2.ds1-11 GNU C Library: Shared
libraries an
ii makedev 2.3.1-66 Creates device files in
/dev
-- debconf information:
* cdrecord/SUID_bit: true
cdrecord/MAKEDEV: true
cdrecord/MAKEDEVNEW: true
cdrecord/do_it_yourself:
emidio@toby:~$ uname -a
Linux toby 2.4.25-toby.sarge #1 Tue Apr 13 20:52:19 CEST 2004 i686
GNU/Linux
PROBLEM DESCRIPTION
toby:/tmp# cdrecord -dummy -vv dev=0,2,0 speed=10 -data test.iso
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01a27 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
and thus may have bugs that are not present in the original
version.
Please send bug reports and support requests to
<[email protected]>.
The original author should not be bothered with problems of this
version.
TOC Type: 1 = CD-ROM
scsidev: '0,2,0'
scsibus: 0 target: 2 lun: 0
Linux sg driver version: 3.1.25
Using libscg version 'schily-0.8'.
Using libscg transport code version 'schily-scsi-linux-sg.c-1.80'
SCSI buffer size: 64512
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC LINKED
Vendor_info : 'PLEXTOR '
Identifikation : 'CD-R PX-W1210S'
Revision : '1.02'
Device seems to be: Generic mmc CD-RW.
Drive current speed: 10
Drive default speed: 10
Drive max speed : 10
Selected speed : 10
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
RAW/R96R
Drive buf size : 2394336 = 2338 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 68 MB
track: 1 start: 0 pregap: 150
Total size: 78 MB (07:44.76) = 34857 sectors
Lout start: 78 MB (07:46/57) = 34857 sectors
41 00 00 14 00 00 00 00
41 01 00 10 00 00 00 00
41 01 01 10 00 00 02 00
41 AA 01 14 00 07 2E 39
Track 1 start 0
Track 2 start 34857
41 00 A0 00 00 00 00 01 00 00 00 00
41 00 A1 00 00 00 00 01 00 00 00 00
41 00 A2 00 00 00 00 07 46 57 00 00
41 00 01 00 00 00 00 00 02 00 00 00
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 3
Reference speed: 0
Is not unrestricted
Is erasable
Disk sub type: High speed Rewritable (CAV) media (1)
ATIP start of lead in: -11625 (97:27/00)
ATIP start of lead out: 333750 (74:12/00)
1T speed low: 4 1T speed high: 10
power mult factor: 1 5
recommended erase/write power: 5
A1 values: 24 1A D0
A2 values: 00 00 00
Disk type: Phase change
Manuf. index: 0
Manufacturer: Illegal Manufacturer code
Blocks total: 333750 Blocks current: 333750 Blocks remaining: 298893
RBlocks total: 336246 RBlocks current: 336246 RBlocks remaining: 301389
Starting to write CD/DVD at speed 10 in dummy TAO mode for single
session.
Last chance to quit, starting dummy write 0 seconds. Operation
starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Starting new track at sector: 0
Track 01: 0 of 68 MB written.cdrecord: Input/output error.
write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 7C 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: F0 00 0B 00 00 00 00 00
Sense Key: 0xB Aborted Command, Segment 0
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (valid)
cmd finished after 0.000s timeout 40s
write track data: error after 253952 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing time: 10.496s
Average write speed 44.3x.
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
cdrecord: Input/output error. close track/session: scsi sendcmd: no
error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 09 00 00 00 00 0A 00 00 00 00 80 01 00 00
Sense Key: 0x9 Vendor Unique, Segment 0
Sense Code: 0x80 Qual 0x01 (vendor unique sense code 0x80) [No matching
qualifier] Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 480s
cmd finished after 0.001s timeout 480s
Fixating time: 0.010s
cdrecord: fifo had 68 puts and 5 gets.
cdrecord: fifo was 0 times empty and 2 times full, min fill was 96%.
The cd writer is a Plextor PX-W1210S SCSI.
I have already successfully tried it with windows and with an old debian
partition on the same machine -> the hardware is not broken.
Downgrading this package to the woody version doesn't solve the problem.
Upgrading my old debian partition to the current sarge status creates
the same problem.
I therefore can't say that the problem is really in this package but
since I don't know which could be the affected package, I write this bug
report here.
If you need more informations, please send me an email so that I can
react faster.
Note: burning without dummy mode gives the same result.
--- End Message ---
--- Begin Message ---
Version: 4:2.01+01a03-5
Some (long) time ago you filed this bug against the cdrecord/mkisofs/cdda2wav
package. In the meantime the package has been replaced by
wodim/genisofs/icedax.
If you can reproduce the same issue with one of the replacing packages (as
released with Debian 7.0 wheezy or later) please reopen and reassign the bug to
the new package and use
reportbug <new-package>
to send a follow-up containing updated system information.
Please note that unless it is reassigned to an existing package further
information sent to this bug is likely to remain unread, because the bug is
currently not assigned to any existing package.
Thank you for taking time to report bugs found in Debian packages.
Kind regards,
Andrei (with no relation to cdrtools or cdrkit maintenance)
--- End Message ---
